diff options
Diffstat (limited to 'tests/unit/utils/test_qtutils.py')
| -rw-r--r-- | tests/unit/utils/test_qtutils.py | 98 |
1 files changed, 49 insertions, 49 deletions
diff --git a/tests/unit/utils/test_qtutils.py b/tests/unit/utils/test_qtutils.py index abf3e43b1..0b9f77ff7 100644 --- a/tests/unit/utils/test_qtutils.py +++ b/tests/unit/utils/test_qtutils.py @@ -208,12 +208,12 @@ def test_ensure_valid(obj, raising, exc_reason, exc_str): @pytest.mark.parametrize('status, raising, message', [ - (QDataStream.Ok, False, None), - (QDataStream.ReadPastEnd, True, "The data stream has read past the end of " + (QDataStream.Status.Ok, False, None), + (QDataStream.Status.ReadPastEnd, True, "The data stream has read past the end of " "the data in the underlying device."), - (QDataStream.ReadCorruptData, True, "The data stream has read corrupt " + (QDataStream.Status.ReadCorruptData, True, "The data stream has read corrupt " "data."), - (QDataStream.WriteFailed, True, "The data stream cannot write to the " + (QDataStream.Status.WriteFailed, True, "The data stream cannot write to the " "underlying device."), ]) def test_check_qdatastream(status, raising, message): @@ -281,12 +281,12 @@ class TestSerializeStream: def stream_mock(self): """Fixture providing a QDataStream-like mock.""" m = unittest.mock.MagicMock(spec=QDataStream) - m.status.return_value = QDataStream.Ok + m.status.return_value = QDataStream.Status.Ok return m def test_serialize_pre_error_mock(self, stream_mock): """Test serialize_stream with an error already set.""" - stream_mock.status.return_value = QDataStream.ReadCorruptData + stream_mock.status.return_value = QDataStream.Status.ReadCorruptData with pytest.raises(OSError, match="The data stream has read corrupt " "data."): @@ -298,7 +298,7 @@ class TestSerializeStream: """Test serialize_stream with an error while serializing.""" obj = QPoint() stream_mock.__lshift__.side_effect = lambda _other: self._set_status( - stream_mock, QDataStream.ReadCorruptData) + stream_mock, QDataStream.Status.ReadCorruptData) with pytest.raises(OSError, match="The data stream has read corrupt " "data."): @@ -308,7 +308,7 @@ class TestSerializeStream: def test_deserialize_pre_error_mock(self, stream_mock): """Test deserialize_stream with an error already set.""" - stream_mock.status.return_value = QDataStream.ReadCorruptData + stream_mock.status.return_value = QDataStream.Status.ReadCorruptData with pytest.raises(OSError, match="The data stream has read corrupt " "data."): @@ -320,7 +320,7 @@ class TestSerializeStream: """Test deserialize_stream with an error while deserializing.""" obj = QPoint() stream_mock.__rshift__.side_effect = lambda _other: self._set_status( - stream_mock, QDataStream.ReadCorruptData) + stream_mock, QDataStream.Status.ReadCorruptData) with pytest.raises(OSError, match="The data stream has read corrupt " "data."): @@ -334,10 +334,10 @@ class TestSerializeStream: dest_obj = QPoint() data = QByteArray() - write_stream = QDataStream(data, QIODevice.WriteOnly) + write_stream = QDataStream(data, QIODevice.OpenModeFlag.WriteOnly) qtutils.serialize_stream(write_stream, src_obj) - read_stream = QDataStream(data, QIODevice.ReadOnly) + read_stream = QDataStream(data, QIODevice.OpenModeFlag.ReadOnly) qtutils.deserialize_stream(read_stream, dest_obj) assert src_obj == dest_obj @@ -346,7 +346,7 @@ class TestSerializeStream: def test_serialize_readonly_stream(self): """Test serialize_stream with a read-only stream.""" data = QByteArray() - stream = QDataStream(data, QIODevice.ReadOnly) + stream = QDataStream(data, QIODevice.OpenModeFlag.ReadOnly) with pytest.raises(OSError, match="The data stream cannot write to " "the underlying device."): qtutils.serialize_stream(stream, QPoint()) @@ -356,7 +356,7 @@ class TestSerializeStream: """Test deserialize_stream with a write-only stream.""" data = QByteArray() obj = QPoint() - stream = QDataStream(data, QIODevice.WriteOnly) + stream = QDataStream(data, QIODevice.OpenModeFlag.WriteOnly) with pytest.raises(OSError, match="The data stream has read past the " "end of the data in the underlying device."): qtutils.deserialize_stream(stream, obj) @@ -391,7 +391,7 @@ class TestSavefileOpen: with qtutils.savefile_open('filename'): pass - qsavefile_mock.open.assert_called_once_with(QIODevice.WriteOnly) + qsavefile_mock.open.assert_called_once_with(QIODevice.OpenModeFlag.WriteOnly) qsavefile_mock.cancelWriting.assert_called_once_with() def test_mock_exception(self, qsavefile_mock): @@ -402,7 +402,7 @@ class TestSavefileOpen: with qtutils.savefile_open('filename'): raise SavefileTestException - qsavefile_mock.open.assert_called_once_with(QIODevice.WriteOnly) + qsavefile_mock.open.assert_called_once_with(QIODevice.OpenModeFlag.WriteOnly) qsavefile_mock.cancelWriting.assert_called_once_with() def test_mock_commit_failed(self, qsavefile_mock): @@ -414,7 +414,7 @@ class TestSavefileOpen: with qtutils.savefile_open('filename'): pass - qsavefile_mock.open.assert_called_once_with(QIODevice.WriteOnly) + qsavefile_mock.open.assert_called_once_with(QIODevice.OpenModeFlag.WriteOnly) assert not qsavefile_mock.cancelWriting.called assert not qsavefile_mock.errorString.called @@ -429,7 +429,7 @@ class TestSavefileOpen: with qtutils.savefile_open('filename') as f: f.write("Hello World") - qsavefile_mock.open.assert_called_once_with(QIODevice.WriteOnly) + qsavefile_mock.open.assert_called_once_with(QIODevice.OpenModeFlag.WriteOnly) assert not qsavefile_mock.cancelWriting.called qsavefile_mock.write.assert_called_once_with(b"Hello World") @@ -542,10 +542,10 @@ if test_file is not None: def open(self, _fname, mode): """Open an in-memory PyQIODevice instead of a real file.""" modes = { - 'wb': QIODevice.WriteOnly | QIODevice.Truncate, - 'w': QIODevice.WriteOnly | QIODevice.Text | QIODevice.Truncate, - 'rb': QIODevice.ReadOnly, - 'r': QIODevice.ReadOnly | QIODevice.Text, + 'wb': QIODevice.OpenModeFlag.WriteOnly | QIODevice.OpenModeFlag.Truncate, + 'w': QIODevice.OpenModeFlag.WriteOnly | QIODevice.OpenModeFlag.Text | QIODevice.OpenModeFlag.Truncate, + 'rb': QIODevice.OpenModeFlag.ReadOnly, + 'r': QIODevice.OpenModeFlag.ReadOnly | QIODevice.OpenModeFlag.Text, } try: qt_mode = modes[mode] @@ -658,14 +658,14 @@ class TestPyQIODevice: Args: method: The name of the method to call. """ - pyqiodev.open(QIODevice.WriteOnly) + pyqiodev.open(QIODevice.OpenModeFlag.WriteOnly) func = getattr(pyqiodev, method) with pytest.raises(OSError, match="Trying to read unreadable file!"): func() def test_unwritable(self, pyqiodev): """Test writing with a read-only device.""" - pyqiodev.open(QIODevice.ReadOnly) + pyqiodev.open(QIODevice.OpenModeFlag.ReadOnly) with pytest.raises(OSError, match="Trying to write to unwritable " "file!"): pyqiodev.write(b'') @@ -678,7 +678,7 @@ class TestPyQIODevice: data: The data to write before checking if the length equals len(data). """ - pyqiodev.open(QIODevice.WriteOnly) + pyqiodev.open(QIODevice.OpenModeFlag.WriteOnly) pyqiodev.write(data) assert len(pyqiodev) == len(data) @@ -687,8 +687,8 @@ class TestPyQIODevice: qf = QFile(str(tmp_path)) dev = qtutils.PyQIODevice(qf) with pytest.raises(qtutils.QtOSError) as excinfo: - dev.open(QIODevice.WriteOnly) - assert excinfo.value.qt_errno == QFileDevice.OpenError + dev.open(QIODevice.OpenModeFlag.WriteOnly) + assert excinfo.value.qt_errno == QFileDevice.FileError.OpenError assert dev.closed def test_fileno(self, pyqiodev): @@ -717,9 +717,9 @@ class TestPyQIODevice: data: The expected data to read after seeking. raising: Whether seeking should raise OSError. """ - with pyqiodev.open(QIODevice.WriteOnly) as f: + with pyqiodev.open(QIODevice.OpenModeFlag.WriteOnly) as f: f.write(b'1234567890') - pyqiodev.open(QIODevice.ReadOnly) + pyqiodev.open(QIODevice.OpenModeFlag.ReadOnly) if raising: with pytest.raises(OSError, match="seek failed!"): pyqiodev.seek(offset, whence) @@ -738,7 +738,7 @@ class TestPyQIODevice: # pylint: enable=no-member,useless-suppression else: pytest.skip("Needs os.SEEK_HOLE or os.SEEK_DATA available.") - pyqiodev.open(QIODevice.ReadOnly) + pyqiodev.open(QIODevice.OpenModeFlag.ReadOnly) with pytest.raises(io.UnsupportedOperation): pyqiodev.seek(0, whence) @@ -767,7 +767,7 @@ class TestPyQIODevice: def test_closed(self, pyqiodev): """Test the closed attribute.""" assert pyqiodev.closed - pyqiodev.open(QIODevice.ReadOnly) + pyqiodev.open(QIODevice.OpenModeFlag.ReadOnly) assert not pyqiodev.closed pyqiodev.close() assert pyqiodev.closed @@ -775,14 +775,14 @@ class TestPyQIODevice: def test_contextmanager(self, pyqiodev): """Make sure using the PyQIODevice as context manager works.""" assert pyqiodev.closed - with pyqiodev.open(QIODevice.ReadOnly) as f: + with pyqiodev.open(QIODevice.OpenModeFlag.ReadOnly) as f: assert not f.closed assert f is pyqiodev assert pyqiodev.closed def test_flush(self, pyqiodev): """Make sure flushing doesn't raise an exception.""" - pyqiodev.open(QIODevice.WriteOnly) + pyqiodev.open(QIODevice.OpenModeFlag.WriteOnly) pyqiodev.write(b'test') pyqiodev.flush() @@ -797,14 +797,14 @@ class TestPyQIODevice: method: The name of the method to call. ret: The return value we expect. """ - pyqiodev.open(QIODevice.WriteOnly) + pyqiodev.open(QIODevice.OpenModeFlag.WriteOnly) func = getattr(pyqiodev, method) assert func() == ret @pytest.mark.parametrize('mode, readable, writable', [ - (QIODevice.ReadOnly, True, False), - (QIODevice.ReadWrite, True, True), - (QIODevice.WriteOnly, False, True), + (QIODevice.OpenModeFlag.ReadOnly, True, False), + (QIODevice.OpenModeFlag.ReadWrite, True, True), + (QIODevice.OpenModeFlag.WriteOnly, False, True), ]) def test_readable_writable(self, mode, readable, writable, pyqiodev): """Test readable() and writable(). @@ -833,19 +833,19 @@ class TestPyQIODevice: size: The size to pass to readline() chunks: A list of expected chunks to read. """ - with pyqiodev.open(QIODevice.WriteOnly) as f: + with pyqiodev.open(QIODevice.OpenModeFlag.WriteOnly) as f: f.write(b'one\ntwo\nthree') - pyqiodev.open(QIODevice.ReadOnly) + pyqiodev.open(QIODevice.OpenModeFlag.ReadOnly) for i, chunk in enumerate(chunks, start=1): print("Expecting chunk {}: {!r}".format(i, chunk)) assert pyqiodev.readline(size) == chunk def test_write(self, pyqiodev): """Make sure writing and re-reading works.""" - with pyqiodev.open(QIODevice.WriteOnly) as f: + with pyqiodev.open(QIODevice.OpenModeFlag.WriteOnly) as f: f.write(b'foo\n') f.write(b'bar\n') - pyqiodev.open(QIODevice.ReadOnly) + pyqiodev.open(QIODevice.OpenModeFlag.ReadOnly) assert pyqiodev.read() == b'foo\nbar\n' def test_write_error(self, pyqiodev_failing): @@ -859,7 +859,7 @@ class TestPyQIODevice: def test_write_error_real(self): """Test a real write error with /dev/full on supported systems.""" qf = QFile('/dev/full') - qf.open(QIODevice.WriteOnly | QIODevice.Unbuffered) + qf.open(QIODevice.OpenModeFlag.WriteOnly | QIODevice.OpenModeFlag.Unbuffered) dev = qtutils.PyQIODevice(qf) with pytest.raises(OSError, match='No space left on device'): dev.write(b'foo') @@ -878,9 +878,9 @@ class TestPyQIODevice: size: The size to pass to read() chunks: A list of expected data chunks. """ - with pyqiodev.open(QIODevice.WriteOnly) as f: + with pyqiodev.open(QIODevice.OpenModeFlag.WriteOnly) as f: f.write(b'1234567890') - pyqiodev.open(QIODevice.ReadOnly) + pyqiodev.open(QIODevice.OpenModeFlag.ReadOnly) for i, chunk in enumerate(chunks): print("Expecting chunk {}: {!r}".format(i, chunk)) assert pyqiodev.read(size) == chunk @@ -974,9 +974,9 @@ class TestInterpolateColor: def test_invalid_colorspace(self, colors): """Test an invalid colorspace.""" with pytest.raises(ValueError): - qtutils.interpolate_color(colors.white, colors.black, 10, QColor.Cmyk) + qtutils.interpolate_color(colors.white, colors.black, 10, QColor.Spec.Cmyk) - @pytest.mark.parametrize('colorspace', [QColor.Rgb, QColor.Hsv, QColor.Hsl]) + @pytest.mark.parametrize('colorspace', [QColor.Spec.Rgb, QColor.Spec.Hsv, QColor.Spec.Hsl]) def test_0_100(self, colors, colorspace): """Test 0% and 100% in different colorspaces.""" white = qtutils.interpolate_color(colors.white, colors.black, 0, colorspace) @@ -987,7 +987,7 @@ class TestInterpolateColor: def test_interpolation_rgb(self): """Test an interpolation in the RGB colorspace.""" color = qtutils.interpolate_color( - testutils.Color(0, 40, 100), testutils.Color(0, 20, 200), 50, QColor.Rgb) + testutils.Color(0, 40, 100), testutils.Color(0, 20, 200), 50, QColor.Spec.Rgb) assert testutils.Color(color) == testutils.Color(0, 30, 150) def test_interpolation_hsv(self): @@ -996,7 +996,7 @@ class TestInterpolateColor: stop = testutils.Color() start.setHsv(0, 40, 100) stop.setHsv(0, 20, 200) - color = qtutils.interpolate_color(start, stop, 50, QColor.Hsv) + color = qtutils.interpolate_color(start, stop, 50, QColor.Spec.Hsv) expected = testutils.Color() expected.setHsv(0, 30, 150) assert testutils.Color(color) == expected @@ -1007,12 +1007,12 @@ class TestInterpolateColor: stop = testutils.Color() start.setHsl(0, 40, 100) stop.setHsl(0, 20, 200) - color = qtutils.interpolate_color(start, stop, 50, QColor.Hsl) + color = qtutils.interpolate_color(start, stop, 50, QColor.Spec.Hsl) expected = testutils.Color() expected.setHsl(0, 30, 150) assert testutils.Color(color) == expected - @pytest.mark.parametrize('colorspace', [QColor.Rgb, QColor.Hsv, QColor.Hsl]) + @pytest.mark.parametrize('colorspace', [QColor.Spec.Rgb, QColor.Spec.Hsv, QColor.Spec.Hsl]) def test_interpolation_alpha(self, colorspace): """Test interpolation of colorspace's alpha.""" start = testutils.Color(0, 0, 0, 30) |