| Age | Commit message (Collapse) | Author |
|---|
|
Now deprecated in libc >= 2.33
Closes #40309
Signed-off-by: David Goulet <dgoulet@torproject.org>
|
|
Now deprecated in libc >= 2.33
Closes #40309
Signed-off-by: David Goulet <dgoulet@torproject.org>
|
|
The directory_fetches_from_authorities() is used to know if a client or relay
should fetch data from an authority early in the boot process.
We had a condition in that function that made a relay trigger that fetch if it
didn't know its address (so we can learn it). However, when this is called,
the address discovery has not been done yet so it would always return true for
a relay.
Furthermore, it would always trigger a log notice that the IPv4 couldn't be
found which was inevitable because the address discovery process has not been
done yet (done when building our first descriptor).
It is also important to point out that starting in 0.4.5.1-alpha, asking an
authority for an address is done during address discovery time using a one-hop
circuit thus independent from the relay deciding to fetch or not documents
from an authority.
Small fix also is to reverse the "IPv(4|6)Only" flag in the notice so that if
we can't find IPv6 it would output to use IPv4Only.
Fixes #40300
Signed-off-by: David Goulet <dgoulet@torproject.org>
|
|
|
|
|
|
|
|
|
|
|
|
When trying to find our address to publish, we would log notice if we couldn't
find it from the cache but then we would look at the suggested cache (which
contains the address from the authorities) in which we might actually have the
address.
Thus that log notice was misplaced. Move it down after the suggested address
cache lookup.
Closes #40300
Signed-off-by: David Goulet <dgoulet@torproject.org>
|
|
It can be called with strings that should have been
length-delimited, but which in fact are not. This can cause a
CPU-DoS bug or, in a worse case, a crash.
Since this function isn't essential, the best solution for older
Tors is to just turn it off.
Fixes bug 40286; bugfix on 0.2.2.1-alpha when dump_desc() was
introduced.
|
|
|
|
|
|
|
|
Back in 0.4.5.1-alpha we added an `==` comparison, which isn't
portable.
Fixes bug #40298; bugfix on 0.4.5.1-alpha.
|
|
Now that exit relays don't allow exit connections to directory authority
DirPorts, the follow-up step is to make directory authorities stop doing
DirPort reachability checks.
Fixes #40287
Signed-off-by: David Goulet <dgoulet@torproject.org>
|
|
Turns out, we forgot to add the METRICS connection type fo the finished
flushing handler.
Fixes #40295
Signed-off-by: David Goulet <dgoulet@torproject.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The comment of that specific unit test wanted 4 ORPorts but for some reasons
we tested for 3 which before the previous commit related to #40289, test would
pass but it was in fact wrong.
Now the code is correct and 4 was in fact correct expected number of ports.
Related to #40289
Signed-off-by: David Goulet <dgoulet@torproject.org>
|
|
We were just looking at the family which is not correct because it is possible
to have two explicit ORPort for the same family but different addresses. One
example is:
ORPort 127.0.0.1:9001 NoAdvertise
ORPort 1.2.3.4:9001 NoListen
Thus, this patch now ignores ports that have different addresses iff they are
both explicits. That is, if we have this example, also two different
addresses:
ORPort 9001
ORPort 127.0.0.1:9001 NoAdvertise
The first one is implicit and second one is explicit and thus we have to
consider them for removal which in this case would remove the "ORPort 9001" in
favor of the second port.
Fixes #40289
Signe-off-by: David Goulet <dgoulet@torproject.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fun bug where we thought we were using the default "false" value when an
implicit address was detected but if we had an explicit address before, the
flag was set to true and then we would only use that value.
And thus, for some configurations, implicit addresses would be flagged as
explicit and then configuring ports goes bad.
Related to #40289
Signed-off-by: David Goulet <dgoulet@torproject.org>
|
|
In other words, if PublishServerDescriptor is set to 0 and AssumeReachable to
1, then allow a relay to hold a RFC1918 address.
Reasons for this are documented in #40208
Fixes #40208
Signed-off-by: David Goulet <dgoulet@torproject.org>
|
|
That comes from 685c4866acf8489c58aca41ec01aa5a53e39220a which added that
check correctly except for when we build a descriptor.
We already omit the IPv6 address, if we need to, when we encode the descriptor
but we need to keep the actual discovered address in the descriptor so we can
notice future IP changes and be able to assess that we are not publishable as
long as we don't specifically set the omit flag.
This lead to also having tor noticing that our IP changed from <nothing> (no
IPv6 in the descriptor) to a discovered one which would trigger every minute.
Fixes #40279, #40288
Signed-off-by: David Goulet <dgoulet@torproject.org>
|
|
|
|
|
|
|
|
Handle the EOF situation for a metrics connection. Furthermore, if we failed
to fetch the data from the inbuf properly, mark the socket as closed because
the caller, connection_process_inbuf(), assumes that we did so on error.
Fixes #40257
Signed-off-by: David Goulet <dgoulet@torproject.org>
|
|
Previously we would warn in this case... but there's really no
justification for doing so, and it can only cause confusion.
Fixes bug #40281; bugfix on 0.4.0.1-alpha.
|
|
In two instances we must look at this flag:
1. When we build the descriptor so the IPv6 is NOT added to the descriptor in
case we judge that we need to omit the address but still publish.
2. When we are deciding if the descriptor is publishable. This flags tells us
that the IPv6 was not found reachable but we should still publish.
Fixes #40279
Signed-off-by: David Goulet <dgoulet@torproject.org>
|
