diff options
Diffstat (limited to 'src/core/or/circuitpadding_machines.c')
-rw-r--r-- | src/core/or/circuitpadding_machines.c | 454 |
1 files changed, 454 insertions, 0 deletions
diff --git a/src/core/or/circuitpadding_machines.c b/src/core/or/circuitpadding_machines.c new file mode 100644 index 0000000000..98767f9e8f --- /dev/null +++ b/src/core/or/circuitpadding_machines.c @@ -0,0 +1,454 @@ +/* Copyright (c) 2019 The Tor Project, Inc. */ +/* See LICENSE for licensing information */ + +/** + * \file circuitpadding_machines.c + * \brief Circuit padding state machines + * + * Introduce circuit padding machines that will be used by Tor circuits, as + * specified by proposal 302 "Hiding onion service clients using padding". + * + * Right now this file introduces two machines that aim to hide the client-side + * of onion service circuits against naive classifiers like the ones from the + * "Circuit Fingerprinting Attacks: Passive Deanonymization of Tor Hidden + * Services" paper from USENIX. By naive classifiers we mean classifiers that + * use basic features like "circuit construction circuits" and "incoming and + * outgoing cell counts" and "duration of activity". + * + * In particular, these machines aim to be lightweight and protect against + * these basic classifiers. They don't aim to protect against more advanced + * attacks that use deep learning or even correlate various circuit + * construction events together. Machines that fool such advanced classifiers + * are also possible, but they can't be so lightweight and might require more + * WTF-PAD features. So for now we opt for the following two machines: + * + * Client-side introduction circuit hiding machine: + * + * This machine hides client-side introduction circuits by making their + * circuit consruction sequence look like normal general circuits that + * download directory information. Furthermore, the circuits are kept open + * until all the padding has been sent, since intro circuits are usually + * very short lived and this act as a distinguisher. For more info see + * circpad_machine_client_hide_intro_circuits() and the sec. + * + * Client-side rendezvous circuit hiding machine: + * + * This machine hides client-side rendezvous circuits by making their + * circuit construction sequence look like normal general circuits. For more + * details see circpad_machine_client_hide_rend_circuits() and the spec. + * + * TODO: These are simple machines that carefully manipulate the cells of the + * initial circuit setup procedure to make them look like general + * circuits. In the future, more states can be baked into their state machine + * to do more advanced obfuscation. + **/ + +#define CIRCUITPADDING_MACHINES_PRIVATE + +#include "core/or/or.h" +#include "feature/nodelist/networkstatus.h" + +#include "lib/crypt_ops/crypto_rand.h" + +#include "core/or/circuitlist.h" + +#include "core/or/circuitpadding_machines.h" +#include "core/or/circuitpadding.h" + +/** Create a client-side padding machine that aims to hide IP circuits. In + * particular, it keeps intro circuits alive until a bunch of fake traffic has + * been pushed through. + */ +void +circpad_machine_client_hide_intro_circuits(smartlist_t *machines_sl) +{ + circpad_machine_spec_t *client_machine + = tor_malloc_zero(sizeof(circpad_machine_spec_t)); + + client_machine->name = "client_ip_circ"; + + client_machine->conditions.state_mask = CIRCPAD_CIRC_OPENED; + client_machine->target_hopnum = 2; + + /* This is a client machine */ + client_machine->is_origin_side = 1; + + /* We only want to pad introduction circuits, and we want to start padding + * only after the INTRODUCE1 cell has been sent, so set the purposes + * appropriately. + * + * In particular we want introduction circuits to blend as much as possible + * with general circuits. Most general circuits have the following initial + * relay cell sequence (outgoing cells marked in [brackets]): + * + * [EXTEND2] -> EXTENDED2 -> [EXTEND2] -> EXTENDED2 -> [BEGIN] -> CONNECTED + * -> [DATA] -> [DATA] -> DATA -> DATA...(inbound data cells continue) + * + * Whereas normal introduction circuits usually look like: + * + * [EXTEND2] -> EXTENDED2 -> [EXTEND2] -> EXTENDED2 -> [EXTEND2] -> EXTENDED2 + * -> [INTRO1] -> INTRODUCE_ACK + * + * This means that up to the sixth cell (first line of each sequence above), + * both general and intro circuits have identical cell sequences. After that + * we want to mimic the second line sequence of + * -> [DATA] -> [DATA] -> DATA -> DATA...(inbound data cells continue) + * + * We achieve this by starting padding INTRODUCE1 has been sent. With padding + * negotiation cells, in the common case of the second line looks like: + * -> [INTRO1] -> [PADDING_NEGOTIATE] -> PADDING_NEGOTIATED -> INTRO_ACK + * + * Then, the middle node will send between INTRO_MACHINE_MINIMUM_PADDING and + * INTRO_MACHINE_MAXIMUM_PADDING cells, to match the "...(inbound data cells + * continue)" portion of the trace (aka the rest of an HTTPS response body). + */ + client_machine->conditions.purpose_mask = + circpad_circ_purpose_to_mask(CIRCUIT_PURPOSE_C_INTRODUCE_ACK_WAIT)| + circpad_circ_purpose_to_mask(CIRCUIT_PURPOSE_C_INTRODUCE_ACKED)| + circpad_circ_purpose_to_mask(CIRCUIT_PURPOSE_C_CIRCUIT_PADDING); + + /* Keep the circuit alive even after the introduction has been finished, + * otherwise the short-term lifetime of the circuit will blow our cover */ + client_machine->manage_circ_lifetime = 1; + + /* Set padding machine limits to help guard against excessive padding */ + client_machine->allowed_padding_count = INTRO_MACHINE_MAXIMUM_PADDING; + client_machine->max_padding_percent = 1; + + /* Two states: START, OBFUSCATE_CIRC_SETUP (and END) */ + circpad_machine_states_init(client_machine, 2); + + /* For the origin-side machine, we transition to OBFUSCATE_CIRC_SETUP after + * sending PADDING_NEGOTIATE, and we stay there (without sending any padding) + * until we receive a STOP from the other side. */ + client_machine->states[CIRCPAD_STATE_START]. + next_state[CIRCPAD_EVENT_NONPADDING_SENT] = + CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP; + + /* origin-side machine has no event reactions while in + * CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP, so no more state transitions here. */ + + /* The client side should never send padding, so it does not need + * to specify token removal, or a histogram definition or state lengths. + * That is all controlled by the middle node. */ + + /* Register the machine */ + client_machine->machine_num = smartlist_len(machines_sl); + circpad_register_padding_machine(client_machine, machines_sl); + + log_info(LD_CIRC, + "Registered client intro point hiding padding machine (%u)", + client_machine->machine_num); +} + +/** Create a relay-side padding machine that aims to hide IP circuits. See + * comments on the function above for more details on the workings of the + * machine. */ +void +circpad_machine_relay_hide_intro_circuits(smartlist_t *machines_sl) +{ + circpad_machine_spec_t *relay_machine + = tor_malloc_zero(sizeof(circpad_machine_spec_t)); + + relay_machine->name = "relay_ip_circ"; + + relay_machine->conditions.state_mask = CIRCPAD_CIRC_OPENED; + + /* This is a relay-side machine */ + relay_machine->is_origin_side = 0; + + /* We want to negotiate END from this side after all our padding is done, so + * that the origin-side machine goes into END state, and eventually closes + * the circuit. */ + relay_machine->should_negotiate_end = 1; + + /* Set padding machine limits to help guard against excessive padding */ + relay_machine->allowed_padding_count = INTRO_MACHINE_MAXIMUM_PADDING; + relay_machine->max_padding_percent = 1; + + /* Two states: START, OBFUSCATE_CIRC_SETUP (and END) */ + circpad_machine_states_init(relay_machine, 2); + + /* For the relay-side machine, we want to transition + * START -> OBFUSCATE_CIRC_SETUP upon first non-padding + * cell sent (PADDING_NEGOTIATED in this case). */ + relay_machine->states[CIRCPAD_STATE_START]. + next_state[CIRCPAD_EVENT_NONPADDING_SENT] = + CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP; + + /* For the relay-side, we want to transition from OBFUSCATE_CIRC_SETUP to END + * state when the length finishes. */ + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + next_state[CIRCPAD_EVENT_LENGTH_COUNT] = CIRCPAD_STATE_END; + + /* Now let's define the OBF -> OBF transitions that maintain our padding + * flow: + * + * For the relay-side machine, we want to keep on sending padding bytes even + * when nothing else happens on this circuit. */ + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + next_state[CIRCPAD_EVENT_PADDING_SENT] = + CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP; + /* For the relay-side machine, we need this transition so that we re-enter + the state, after PADDING_NEGOTIATED is sent. Otherwise, the remove token + function will disable the timer, and nothing will restart it since there + is no other motion on an intro circuit. */ + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + next_state[CIRCPAD_EVENT_NONPADDING_SENT] = + CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP; + + /* Token removal strategy for OBFUSCATE_CIRC_SETUP state: Don't + * remove any tokens. + * + * We rely on the state length sampling and not token removal, to avoid + * the mallocs required to copy the histograms for token removal, + * and to avoid monotime calls needed to determine histogram + * bins for token removal. */ + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + token_removal = CIRCPAD_TOKEN_REMOVAL_NONE; + + /* Figure out the length of the OBFUSCATE_CIRC_SETUP state so that it's + * randomized. The relay side will send between INTRO_MACHINE_MINIMUM_PADDING + * and INTRO_MACHINE_MAXIMUM_PADDING padding cells towards the client. */ + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + length_dist.type = CIRCPAD_DIST_UNIFORM; + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + length_dist.param1 = INTRO_MACHINE_MINIMUM_PADDING; + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + length_dist.param2 = INTRO_MACHINE_MAXIMUM_PADDING; + + /* Configure histogram */ + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + histogram_len = 2; + + /* For the relay-side machine we want to batch padding instantly to pretend + * its an incoming directory download. So set the histogram edges tight: + * (1, 10ms, infinity). */ + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + histogram_edges[0] = 1000; + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + histogram_edges[1] = 10000; + + /* We put all our tokens in bin 0, which means we want 100% probability + * for choosing a inter-packet delay of between 1000 and 10000 microseconds + * (1 to 10ms). Since we only have 1 bin, it doesn't matter how many tokens + * there are, 1000 out of 1000 is 100% */ + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + histogram[0] = 1000; + + /* just one bin, so setup the total tokens */ + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + histogram_total_tokens = + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP].histogram[0]; + + /* Register the machine */ + relay_machine->machine_num = smartlist_len(machines_sl); + circpad_register_padding_machine(relay_machine, machines_sl); + + log_info(LD_CIRC, + "Registered relay intro circuit hiding padding machine (%u)", + relay_machine->machine_num); +} + +/************************** Rendezvous-circuit machine ***********************/ + +/** Create a client-side padding machine that aims to hide rendezvous + * circuits.*/ +void +circpad_machine_client_hide_rend_circuits(smartlist_t *machines_sl) +{ + circpad_machine_spec_t *client_machine + = tor_malloc_zero(sizeof(circpad_machine_spec_t)); + + client_machine->name = "client_rp_circ"; + + /* Only pad after the circuit has been built and pad to the middle */ + client_machine->conditions.state_mask = CIRCPAD_CIRC_OPENED; + client_machine->target_hopnum = 2; + + /* This is a client machine */ + client_machine->is_origin_side = 1; + + /* We only want to pad rendezvous circuits, and we want to start padding only + * after the rendezvous circuit has been established. + * + * Following a similar argument as for intro circuits, we are aiming for + * padded rendezvous circuits to blend in with the initial cell sequence of + * general circuits which usually look like this: + * + * [EXTEND2] -> EXTENDED2 -> [EXTEND2] -> EXTENDED2 -> [BEGIN] -> CONNECTED + * -> [DATA] -> [DATA] -> DATA -> DATA...(incoming cells continue) + * + * Whereas normal rendezvous circuits usually look like: + * + * [EXTEND2] -> EXTENDED2 -> [EXTEND2] -> EXTENDED2 -> [EST_REND] -> REND_EST + * -> REND2 -> [BEGIN] + * + * This means that up to the sixth cell (in the first line), both general and + * rend circuits have identical cell sequences. + * + * After that we want to mimic a [DATA] -> [DATA] -> DATA -> DATA sequence. + * + * With padding negotiation right after the REND_ESTABLISHED, the sequence + * becomes: + * + * [EXTEND2] -> EXTENDED2 -> [EXTEND2] -> EXTENDED2 -> [EST_REND] -> REND_EST + * -> [PADDING_NEGOTIATE] -> [DROP] -> PADDING_NEGOTIATED -> DROP... + * + * After which normal application DATA cells continue on the circuit. + * + * Hence this way we make rendezvous circuits look like general circuits up + * till the end of the circuit setup. */ + client_machine->conditions.purpose_mask = + circpad_circ_purpose_to_mask(CIRCUIT_PURPOSE_C_REND_JOINED)| + circpad_circ_purpose_to_mask(CIRCUIT_PURPOSE_C_REND_READY)| + circpad_circ_purpose_to_mask(CIRCUIT_PURPOSE_C_REND_READY_INTRO_ACKED); + + /* Set padding machine limits to help guard against excessive padding */ + client_machine->allowed_padding_count = 1; + client_machine->max_padding_percent = 1; + + /* Two states: START, OBFUSCATE_CIRC_SETUP (and END) */ + circpad_machine_states_init(client_machine, 2); + + /* START -> OBFUSCATE_CIRC_SETUP transition upon sending the first + * non-padding cell (which is PADDING_NEGOTIATE) */ + client_machine->states[CIRCPAD_STATE_START]. + next_state[CIRCPAD_EVENT_NONPADDING_SENT] = + CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP; + + /* OBFUSCATE_CIRC_SETUP -> END transition when we send our first + * padding packet and/or hit the state length (the state length is 1). */ + client_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + next_state[CIRCPAD_EVENT_PADDING_RECV] = CIRCPAD_STATE_END; + client_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + next_state[CIRCPAD_EVENT_LENGTH_COUNT] = CIRCPAD_STATE_END; + + /* Don't use a token removal strategy since we don't want to use monotime + * functions and we want to avoid mallocing histogram copies. We want + * this machine to be light. */ + client_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + token_removal = CIRCPAD_TOKEN_REMOVAL_NONE; + + /* Instead, to control the volume of padding (we just want to send a single + * padding cell) we will use a static state length. We just want one token, + * since we want to make the following pattern: + * [PADDING_NEGOTIATE] -> [DROP] -> PADDING_NEGOTIATED -> DROP */ + client_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + length_dist.type = CIRCPAD_DIST_UNIFORM; + client_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + length_dist.param1 = 1; + client_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + length_dist.param2 = 2; // rand(1,2) is always 1 + + /* Histogram is: (0 msecs, 1 msec, infinity). We want this to be fast so + * that we send our outgoing [DROP] before the PADDING_NEGOTIATED comes + * back from the relay side. */ + client_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + histogram_len = 2; + client_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + histogram_edges[0] = 0; + client_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + histogram_edges[1] = 1000; + + /* We want a 100% probability of choosing an inter-packet delay of + * between 0 and 1ms. Since we don't use token removal, + * the number of tokens does not matter. (And also, state_length + * governs how many packets we send). */ + client_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + histogram[0] = 1; + client_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + histogram_total_tokens = 1; + + /* Register the machine */ + client_machine->machine_num = smartlist_len(machines_sl); + circpad_register_padding_machine(client_machine, machines_sl); + + log_info(LD_CIRC, + "Registered client rendezvous circuit hiding padding machine (%u)", + client_machine->machine_num); +} + +/** Create a relay-side padding machine that aims to hide IP circuits. + * + * This is meant to follow the client-side machine. + */ +void +circpad_machine_relay_hide_rend_circuits(smartlist_t *machines_sl) +{ + circpad_machine_spec_t *relay_machine + = tor_malloc_zero(sizeof(circpad_machine_spec_t)); + + relay_machine->name = "relay_rp_circ"; + + /* Only pad after the circuit has been built and pad to the middle */ + relay_machine->conditions.min_hops = 2; + relay_machine->conditions.state_mask = CIRCPAD_CIRC_OPENED; + + /* This is a relay-side machine */ + relay_machine->is_origin_side = 0; + + /* Set padding machine limits to help guard against excessive padding */ + relay_machine->allowed_padding_count = 1; + relay_machine->max_padding_percent = 1; + + /* Two states: START, OBFUSCATE_CIRC_SETUP (and END) */ + circpad_machine_states_init(relay_machine, 2); + + /* START -> OBFUSCATE_CIRC_SETUP transition upon sending the first + * non-padding cell (which is PADDING_NEGOTIATED) */ + relay_machine->states[CIRCPAD_STATE_START]. + next_state[CIRCPAD_EVENT_NONPADDING_SENT] = + CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP; + + /* OBFUSCATE_CIRC_SETUP -> END transition when we send our first + * padding packet and/or hit the state length (the state length is 1). */ + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + next_state[CIRCPAD_EVENT_PADDING_SENT] = CIRCPAD_STATE_END; + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + next_state[CIRCPAD_EVENT_LENGTH_COUNT] = CIRCPAD_STATE_END; + + /* Don't use a token removal strategy since we don't want to use monotime + * functions and we want to avoid mallocing histogram copies. We want + * this machine to be light. */ + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + token_removal = CIRCPAD_TOKEN_REMOVAL_NONE; + + /* Instead, to control the volume of padding (we just want to send a single + * padding cell) we will use a static state length. We just want one token, + * since we want to make the following pattern: + * [PADDING_NEGOTIATE] -> [DROP] -> PADDING_NEGOTIATED -> DROP */ + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + length_dist.type = CIRCPAD_DIST_UNIFORM; + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + length_dist.param1 = 1; + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + length_dist.param2 = 2; // rand(1,2) is always 1 + + /* Histogram is: (0 msecs, 1 msec, infinity). We want this to be fast so + * that the outgoing DROP cell is sent immediately after the + * PADDING_NEGOTIATED. */ + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + histogram_len = 2; + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + histogram_edges[0] = 0; + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + histogram_edges[1] = 1000; + + /* We want a 100% probability of choosing an inter-packet delay of + * between 0 and 1ms. Since we don't use token removal, + * the number of tokens does not matter. (And also, state_length + * governs how many packets we send). */ + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + histogram[0] = 1; + relay_machine->states[CIRCPAD_STATE_OBFUSCATE_CIRC_SETUP]. + histogram_total_tokens = 1; + + /* Register the machine */ + relay_machine->machine_num = smartlist_len(machines_sl); + circpad_register_padding_machine(relay_machine, machines_sl); + + log_info(LD_CIRC, + "Registered relay rendezvous circuit hiding padding machine (%u)", + relay_machine->machine_num); +} |