gui, man, authors: Update docs, translations, and contributors

29 files changed, 1292 insertions, 1230 deletions

diff --git a/gui/default/assets/lang/lang-bg.json b/gui/default/assets/lang/lang-bg.json
index b2ecb4981..e012407a4 100644
--- a/gui/default/assets/lang/lang-bg.json
+++ b/gui/default/assets/lang/lang-bg.json
@@ -65,6 +65,7 @@
     "Configured": "Настроен",
     "Connected (Unused)": "Свързано (неизползвано)",
     "Connection Error": "Грешка при осъществяване на връзка",
+    "Connection Management": "Управление на връзките",
     "Connection Type": "Вид на връзката",
     "Connections": "Връзки",
     "Connections via relays might be rate limited by the relay": "Препращаните връзки могат да бъдат обект на ограничения от препращащото устройство",
@@ -259,6 +260,7 @@
     "No upgrades": "Без обновяване",
     "Not shared": "Не споделена",
     "Notice": "Известие",
+    "Number of Connections": "Брой на връзките",
     "OK": "Добре",
     "Off": "Изключено",
     "Oldest First": "Първо най-стари",
@@ -426,11 +428,13 @@
     "The interval, in seconds, for running cleanup in the versions directory. Zero to disable periodic cleaning.": "Интервал, в секунди, на почистване на папката с версии. Нула изключва периодичното почистване.",
     "The maximum age must be a number and cannot be blank.": "Максималната възраст трябва да е число, полето не може да бъде празно.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Максимална продължителност за пазене на версия (в дни, за да не бъдат изтривани версии задайте 0).",
+    "The number of connections must be a non-negative number.": "Броят на връзките трябва да бъде положително число.",
     "The number of days must be a number and cannot be blank.": "Броят дни трябва да бъде число и не може да бъде празно.",
     "The number of days to keep files in the trash can. Zero means forever.": "Брой дни за пазене на файловете в кошчето. Нула значи завинаги.",
     "The number of old versions to keep, per file.": "Брой стари версии, които да бъдат пазени за всеки файл.",
     "The number of versions must be a number and cannot be blank.": "Броят версии трябва да бъде число и не може да бъде празно.",
     "The path cannot be blank.": "Пътят не може да бъде празен.",
+    "The rate limit is applied to the accumulated traffic of all connections to this device.": "Ограничението се прилага към общия трафик от всички връзки към това устройство.",
     "The rate limit must be a non-negative number (0: no limit)": "Ограничението на скоростта трябва да бъде положително число (0: неограничено)",
     "The remote device has not accepted sharing this folder.": "Отдалеченото устройство не е приело да споделя папката.",
     "The remote device has paused this folder.": "Отдалеченото устройство е оставило на пауза папката.",
@@ -499,6 +503,7 @@
     "Watching for changes discovers most changes without periodic scanning.": "Наблюдението за промени открива повечето изменения без периодични обхождания.",
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Когато добавяте ново устройство имайте предвид, че то също трябва да бъде добавено от другата страна.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Като добавяте папката имайте предвид, че той се използва за еднозначно указване на папката между устройствата. Има разлика в регистъра на знаците и трябва изцяло да съвпада между всички устройства.",
+    "When set to more than one on both devices, Syncthing will attempt to establish multiple concurrent connections. If the values differ, the highest will be used. Set to zero to let Syncthing decide.": "Когато стойността е повече от едно на две устройства, Syncthing ще установи няколко едновременни връзки. Ако стойностите се различават, ще използва по-голямата. Задайте нула, за да оставите Syncthing да прецени.",
     "Yes": "Да",
     "Yesterday": "Вчера",
     "You can also copy and paste the text into a new message manually.": "Също така можете ръчно да копирате и поставите текста в ново съобщение.",
diff --git a/gui/default/assets/lang/lang-de.json b/gui/default/assets/lang/lang-de.json
index 001e90427..594d68201 100644
--- a/gui/default/assets/lang/lang-de.json
+++ b/gui/default/assets/lang/lang-de.json
@@ -65,6 +65,7 @@
     "Configured": "Konfiguriert",
     "Connected (Unused)": "Verbunden (Nicht genutzt)",
     "Connection Error": "Verbindungsfehler",
+    "Connection Management": "Verbindungsverwaltung",
     "Connection Type": "Verbindungstyp",
     "Connections": "Verbindungen",
     "Connections via relays might be rate limited by the relay": "Verbindungen über Weiterleitungsserver können von diesen in der Geschwindigkeit begrenzt werden",
@@ -259,6 +260,7 @@
     "No upgrades": "Keine Aktualisierungen",
     "Not shared": "Nicht geteilt",
     "Notice": "Hinweis",
+    "Number of Connections": "Anzahl Verbindungen",
     "OK": "OK",
     "Off": "Aus",
     "Oldest First": "Älteste zuerst",
@@ -426,12 +428,14 @@
     "The interval, in seconds, for running cleanup in the versions directory. Zero to disable periodic cleaning.": "Das Intervall, in Sekunden, zwischen den Bereinigungen im Versionsverzeichnis. Null um das regelmäßige Bereinigen zu deaktivieren.",
     "The maximum age must be a number and cannot be blank.": "Das Höchstalter muss angegeben werden und eine Zahl sein.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Die längste Zeit, die alte Versionen vorgehalten werden (in Tagen) (0 um alte Versionen für immer zu behalten).",
+    "The number of connections must be a non-negative number.": "Die Anzahl der Verbindungen muss eine nicht-negative Zahl sein.",
     "The number of days must be a number and cannot be blank.": "Die Anzahl der Tage muss eine Ganzzahl sein und darf nicht leer sein.",
     "The number of days to keep files in the trash can. Zero means forever.": "Dauer in Tagen für welche die Dateien aufgehoben werden sollen. 0 bedeutet für immer.",
     "The number of old versions to keep, per file.": "Anzahl der alten Versionen, die von jeder Datei behalten werden sollen.",
     "The number of versions must be a number and cannot be blank.": "Die Anzahl von Versionen muss eine Ganzzahl und darf nicht leer sein.",
     "The path cannot be blank.": "Der Pfad darf nicht leer sein.",
-    "The rate limit must be a non-negative number (0: no limit)": "Das Datenratelimit muss eine nicht negative Zahl sein (0 = kein Limit).",
+    "The rate limit is applied to the accumulated traffic of all connections to this device.": "Die Datenratenbegrenzung wird auf den gesamten Datenverkehr aller Verbindungen zu diesem Gerät angewendet.",
+    "The rate limit must be a non-negative number (0: no limit)": "Die Datenratenbegrenzung muss eine nicht-negative Zahl sein (0 = keine Begrenzung).",
     "The remote device has not accepted sharing this folder.": "Dieser geteilte Ordner wurde vom Gerät nicht angenommen.",
     "The remote device has paused this folder.": "Dieser geteilte Ordner ist auf dem Gerät pausiert.",
     "The rescan interval must be a non-negative number of seconds.": "Das Scanintervall muss eine nicht negative Anzahl (in Sekunden) sein.",
@@ -499,6 +503,7 @@
     "Watching for changes discovers most changes without periodic scanning.": "Das Überwachen von Änderungen entdeckt die meisten Änderungen ohne regelmäßiges Scannen.",
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Beachte beim Hinzufügen eines neuen Gerätes, dass dieses Gerät auch auf den anderen Geräten hinzugefügt werden muss.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Beachte bitte beim Hinzufügen eines neuen Ordners, dass die Ordnerkennung dazu verwendet wird, Ordner zwischen Geräten zu verbinden. Die Kennung muss also auf allen Geräten gleich sein, die Groß- und Kleinschreibung muss dabei beachtet werden.",
+    "When set to more than one on both devices, Syncthing will attempt to establish multiple concurrent connections. If the values differ, the highest will be used. Set to zero to let Syncthing decide.": "Wenn auf beiden Geräten der Wert höher als eins eingestellt ist, versucht Syncthing, mehrere gleichzeitige Verbindungen herzustellen. Wenn die Werte unterschiedlich sind, wird der höchste Wert verwendet. Den Wert auf Null setzen, um Syncthing entscheiden zu lassen.",
     "Yes": "Ja",
     "Yesterday": "Gestern",
     "You can also copy and paste the text into a new message manually.": "Sie können den Text auch kopieren und manuell in eine neue Nachricht einfügen.",
diff --git a/gui/default/assets/lang/lang-es.json b/gui/default/assets/lang/lang-es.json
index 4b61ea6e5..ab6f3d5ff 100644
--- a/gui/default/assets/lang/lang-es.json
+++ b/gui/default/assets/lang/lang-es.json
@@ -57,7 +57,7 @@
     "Cleanup Interval": "Intervalo de Limpieza",
     "Click to see full identification string and QR code.": "Haga clic para ver la cadena de identificación completa y su código QR.",
     "Close": "Cerrar",
-    "Command": "Acción",
+    "Command": "Dominio",
     "Comment, when used at the start of a line": "Comentar, cuando se usa al comienzo de una línea",
     "Compression": "Compresión",
     "Configuration Directory": "Carpeta de la configuración",
@@ -65,6 +65,7 @@
     "Configured": "Configurado",
     "Connected (Unused)": "Conectado (Sin Uso)",
     "Connection Error": "Error de conexión",
+    "Connection Management": "Gestión de las conexiones",
     "Connection Type": "Tipo de conexión",
     "Connections": "Conexiones",
     "Connections via relays might be rate limited by the relay": "Las conexiones a través de relés pueden estar limitadas por la velocidad del relé",
@@ -85,7 +86,7 @@
     "Default Folder": "Carpeta Predeterminada",
     "Default Ignore Patterns": "Ignorar patrones por defecto",
     "Defaults": "Valores Predeterminados",
-    "Delete": "Eliminar",
+    "Delete": "Borrar",
     "Delete Unexpected Items": "Borrar Elementos Inesperados",
     "Deleted {%file%}": "Eliminado {{file}}",
     "Deselect All": "Deseleccionar Todo",
@@ -259,6 +260,7 @@
     "No upgrades": "Sin actualizaciones",
     "Not shared": "No Compartido(a)",
     "Notice": "Aviso",
+    "Number of Connections": "Número de las conexiones",
     "OK": "De acuerdo",
     "Off": "Desconectar",
     "Oldest First": "El más antiguo primero",
@@ -426,11 +428,13 @@
     "The interval, in seconds, for running cleanup in the versions directory. Zero to disable periodic cleaning.": "El intervalo, en segundos, para ejecutar la limpieza del directorio de versiones. Cero para desactivar la limpieza periódica.",
     "The maximum age must be a number and cannot be blank.": "La edad máxima debe ser un número y no puede estar vacía.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "El tiempo máximo para mantener una versión en días (introducir 0 para mantener las versiones indefinidamente).",
+    "The number of connections must be a non-negative number.": "El número de las conexiones debe ser un número que no sea negativo.",
     "The number of days must be a number and cannot be blank.": "El número de días debe ser un número y no puede estar en blanco.",
     "The number of days to keep files in the trash can. Zero means forever.": "El número de días para mantener los archivos en la papelera. Cero significa \"para siempre\".",
     "The number of old versions to keep, per file.": "El número de versiones a antiguas a mantener para cada fichero.",
     "The number of versions must be a number and cannot be blank.": "El número de versiones debe ser un número y no puede estar vacío.",
     "The path cannot be blank.": "La ruta no puede estar vacía.",
+    "The rate limit is applied to the accumulated traffic of all connections to this device.": "El límite de velocidad se aplica al tráfico acumulado de todas las conexiones a este dispositivo.",
     "The rate limit must be a non-negative number (0: no limit)": "El límite de velocidad debe ser un número no negativo (0: sin límite)",
     "The remote device has not accepted sharing this folder.": "El dispositivo remoto no ha aceptado compartir esta carpeta.",
     "The remote device has paused this folder.": "El dispositivo remoto ha puesto en pausa esta carpeta.",
@@ -499,6 +503,7 @@
     "Watching for changes discovers most changes without periodic scanning.": "El control de cambios descubre la mayoría de cambios sin el escaneo periódico.",
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Cuando añada un nuevo dispositivo, tenga en cuenta que este debe añadirse también en el otro lado.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Cuando añada una nueva carpeta, tenga en cuenta que su ID se usa para unir carpetas entre dispositivos. Son sensibles a las mayúsculas y deben coincidir exactamente entre todos los dispositivos.",
+    "When set to more than one on both devices, Syncthing will attempt to establish multiple concurrent connections. If the values differ, the highest will be used. Set to zero to let Syncthing decide.": "Cuando se configura en más de uno o en ambos dispositivos, Syncthing intentará establecer múltiples conexiones simultáneamente. Si los valores difieren, se utilizará el más alto. Pon cero para que Syncthing decida por ti.",
     "Yes": "Si",
     "Yesterday": "Ayer",
     "You can also copy and paste the text into a new message manually.": "También puedes copiar y pegar manualmente el texto en un nuevo mensaje.",
diff --git a/gui/default/assets/lang/lang-fr.json b/gui/default/assets/lang/lang-fr.json
index b641e0e3f..c44c8a461 100644
--- a/gui/default/assets/lang/lang-fr.json
+++ b/gui/default/assets/lang/lang-fr.json
@@ -65,6 +65,7 @@
     "Configured": "Configurée",
     "Connected (Unused)": "Connecté (Non utilisé)",
     "Connection Error": "Erreur de connexion",
+    "Connection Management": "Gestion de la connectivité",
     "Connection Type": "Type de connexion",
     "Connections": "Connexions",
     "Connections via relays might be rate limited by the relay": "Les connexions via un relais sont généralement limitées en débit par les capacités du relais",
@@ -259,6 +260,7 @@
     "No upgrades": "Pas de mises à jour",
     "Not shared": "Non partagé",
     "Notice": "Notification",
+    "Number of Connections": "Nombre de connexions",
     "OK": "OK",
     "Off": "Désactivée",
     "Oldest First": "Les plus anciens en premier",
@@ -426,11 +428,13 @@
     "The interval, in seconds, for running cleanup in the versions directory. Zero to disable periodic cleaning.": "L'intervalle, en secondes, de l'exécution du nettoyage du répertoire des versions. Définir à 0 pour désactiver la purge périodique (Dans ce cas, elle n'est effectuée qu'au démarrage).",
     "The maximum age must be a number and cannot be blank.": "L'âge maximum doit être un nombre et ne peut être vide.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "La durée maximale de conservation d'une version (en jours, 0 pour garder les versions pour toujours).",
+    "The number of connections must be a non-negative number.": "Le nombre de connexions ne peut pas être négatif.",
     "The number of days must be a number and cannot be blank.": "Le nombre de jours doit être numérique et ne peut pas être vide.",
     "The number of days to keep files in the trash can. Zero means forever.": "Nombre de jours de conservation des fichiers dans la poubelle. 0 signifie \"indéfiniment\".",
     "The number of old versions to keep, per file.": "Nombre maximal d'anciennes versions à conserver indéfiniment, par fichier.",
     "The number of versions must be a number and cannot be blank.": "Le nombre de versions doit être numérique, et ne peut pas être vide.",
     "The path cannot be blank.": "Le chemin ne peut pas être vide.",
+    "The rate limit is applied to the accumulated traffic of all connections to this device.": "La limite de taux s'applique au trafic cumulé des connexions à notre appareil.",
     "The rate limit must be a non-negative number (0: no limit)": "La limite de débit ne doit pas être négative (0 = pas de limite)",
     "The remote device has not accepted sharing this folder.": "L'appareil distant n'a pas (encore ?) accepté de partager ce répertoire.",
     "The remote device has paused this folder.": "L'appareil distant a mis ce partage en pause.",
@@ -499,6 +503,7 @@
     "Watching for changes discovers most changes without periodic scanning.": "La surveillance des changements découvre la plupart des changements sans réanalyses périodiques.",
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Lorsque vous ajoutez un appareil, gardez à l'esprit que le votre doit aussi être ajouté de l'autre coté.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Lorsqu'un nouveau partage est ajouté, gardez à l'esprit que c'est cet ID qui est utilisée pour lier les répertoires à travers les appareils. L'ID est sensible à la casse et sera forcément la même sur tous les appareils participant à ce partage.",
+    "When set to more than one on both devices, Syncthing will attempt to establish multiple concurrent connections. If the values differ, the highest will be used. Set to zero to let Syncthing decide.": "Au-delà de un sur chaque appareil, Syncthing tentera d'établir autant de connexions simultanées. Si les valeurs diffèrent, la plus grande sera utilisée. Laissez à zéro pour laisser Syncthing décider.",
     "Yes": "Oui",
     "Yesterday": "Hier",
     "You can also copy and paste the text into a new message manually.": "Vous pouvez aussi copier/coller ce texte dans un nouveau message manuellement.",
diff --git a/gui/default/assets/lang/lang-it.json b/gui/default/assets/lang/lang-it.json
index a8ff7828b..35b0af7f8 100644
--- a/gui/default/assets/lang/lang-it.json
+++ b/gui/default/assets/lang/lang-it.json
@@ -65,6 +65,7 @@
     "Configured": "Configurato",
     "Connected (Unused)": "Connesso (non utilizzato)",
     "Connection Error": "Errore di Connessione",
+    "Connection Management": "Gestione della Connessione",
     "Connection Type": "Tipo di Connessione",
     "Connections": "Connessioni",
     "Connections via relays might be rate limited by the relay": "Le connessioni tramite relè potrebbero essere limitate dalla velocità del relè",
@@ -259,6 +260,7 @@
     "No upgrades": "Nessun aggiornamento",
     "Not shared": "Non condiviso",
     "Notice": "Avviso",
+    "Number of Connections": "Numero di Connessioni",
     "OK": "OK",
     "Off": "Disattiva",
     "Oldest First": "Prima il Meno Recente",
@@ -426,11 +428,13 @@
     "The interval, in seconds, for running cleanup in the versions directory. Zero to disable periodic cleaning.": "L'intervallo, in secondi, per l'esecuzione della pulizia nella directory delle versioni. Zero per disabilitare la pulizia periodica.",
     "The maximum age must be a number and cannot be blank.": "La durata massima dev'essere un numero e non può essere vuoto.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "La durata massima di una versione (in giorni, imposta a 0 per mantenere le versioni per sempre).",
+    "The number of connections must be a non-negative number.": "Il numero di connessioni deve essere un numero non negativo.",
     "The number of days must be a number and cannot be blank.": "Il numero di giorni deve essere un numero e non può essere vuoto.",
     "The number of days to keep files in the trash can. Zero means forever.": "Il numero di giorni per conservare i file nel cestino. Zero significa per sempre.",
     "The number of old versions to keep, per file.": "Il numero di vecchie versioni da mantenere, per file.",
     "The number of versions must be a number and cannot be blank.": "Il numero di versioni dev'essere un numero e non può essere vuoto.",
     "The path cannot be blank.": "Il percorso non può essere vuoto.",
+    "The rate limit is applied to the accumulated traffic of all connections to this device.": "Il limite di velocità viene applicato al traffico accumulato di tutte le connessioni a questo dispositivo.",
     "The rate limit must be a non-negative number (0: no limit)": "Il limite di banda deve essere un numero non negativo (0: nessun limite)",
     "The remote device has not accepted sharing this folder.": "Il dispositivo remoto non ha accettato di condividere questa cartella.",
     "The remote device has paused this folder.": "Il dispositivo remoto ha messo in pausa questa cartella.",
@@ -499,6 +503,7 @@
     "Watching for changes discovers most changes without periodic scanning.": "Guardando le modifiche si scopre la maggior parte delle modifiche senza scansione periodica.",
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Quando si aggiunge un nuovo dispositivo, tenere presente che il dispositivo deve essere aggiunto anche dall'altra parte.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Quando aggiungi una nuova cartella, ricordati che gli ID vengono utilizzati per collegare le cartelle nei dispositivi. Distinguono maiuscole e minuscole e devono corrispondere esattamente su tutti i dispositivi.",
+    "When set to more than one on both devices, Syncthing will attempt to establish multiple concurrent connections. If the values differ, the highest will be used. Set to zero to let Syncthing decide.": "Se impostato su più di uno su entrambi i dispositivi, Syncthing tenterà di stabilire più connessioni simultanee. Se i valori differiscono, verrà utilizzato quello più alto. Impostare a zero per lasciare che sia Syncthing a decidere.",
     "Yes": "Sì",
     "Yesterday": "Ieri",
     "You can also copy and paste the text into a new message manually.": "Puoi anche copiare e incollare manualmente il testo in un nuovo messaggio.",
diff --git a/gui/default/assets/lang/lang-ko-KR.json b/gui/default/assets/lang/lang-ko-KR.json
index ed14f8014..c57c88d40 100644
--- a/gui/default/assets/lang/lang-ko-KR.json
+++ b/gui/default/assets/lang/lang-ko-KR.json
@@ -65,6 +65,7 @@
     "Configured": "설정됨",
     "Connected (Unused)": "연결됨(미사용)",
     "Connection Error": "연결 오류",
+    "Connection Management": "연결 관리",
     "Connection Type": "연결 유형",
     "Connections": "연결",
     "Connections via relays might be rate limited by the relay": "중계자를 통한 연결은 중계자로부터 속도가 제한될 수 있습니다.",
@@ -259,6 +260,7 @@
     "No upgrades": "업데이트하지 않음",
     "Not shared": "공유되지 않음",
     "Notice": "공지",
+    "Number of Connections": "연결 수",
     "OK": "확인",
     "Off": "하지 않음",
     "Oldest First": "오랜 파일 순",
@@ -426,15 +428,17 @@
     "The interval, in seconds, for running cleanup in the versions directory. Zero to disable periodic cleaning.": "버전 폴더를 정리하는 초 단위의 간격입니다. 주기적 정리를 비활성화하려면 0을 입력하십시오.",
     "The maximum age must be a number and cannot be blank.": "최대 보관 기간은 숫자여야 하며 비워 둘 수 없습니다.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "버전을 보관할 최대 시간입니다(일 단위이며 버전을 영구 보관하려면 0을 입력하십시오).",
+    "The number of connections must be a non-negative number.": "연결 수는 음이 아닌 정수여야 합니다.",
     "The number of days must be a number and cannot be blank.": "일수는 숫자여야 하며 비워 둘 수 없습니다.",
     "The number of days to keep files in the trash can. Zero means forever.": "휴지통에서 파일을 보관할 일수입니다. 0은 무제한을 의미합니다.",
     "The number of old versions to keep, per file.": "파일별로 유지할 이전 버전의 개수입니다.",
     "The number of versions must be a number and cannot be blank.": "버전 개수는 숫자여야 하며 비워 둘 수 없습니다.",
     "The path cannot be blank.": "경로는 비워 둘 수 없습니다.",
-    "The rate limit must be a non-negative number (0: no limit)": "속도 제한은 양수여야 합니다(0: 무제한)",
+    "The rate limit is applied to the accumulated traffic of all connections to this device.": "속도 제한은 이 기기에 대한 모든 연결의 누적 트래픽에 적용됩니다.",
+    "The rate limit must be a non-negative number (0: no limit)": "속도 제한은 음이 아닌 정수여야 합니다(0: 무제한)",
     "The remote device has not accepted sharing this folder.": "다른 기기가 이 폴더의 공유를 승인하지 않았습니다.",
     "The remote device has paused this folder.": "다른 기기가 이 폴더를 일시 중지했습니다.",
-    "The rescan interval must be a non-negative number of seconds.": "재탐색 간격은 초 단위의 양수여야 합니다.",
+    "The rescan interval must be a non-negative number of seconds.": "재탐색 간격은 초 단위의 음이 아닌 정수여야 합니다.",
     "There are no devices to share this folder with.": "이 폴더를 공유할 기기가 없습니다.",
     "There are no file versions to restore.": "복구할 파일 버전이 없습니다.",
     "There are no folders to share with this device.": "이 기기와 공유할 폴더가 없습니다.",
@@ -499,6 +503,7 @@
     "Watching for changes discovers most changes without periodic scanning.": "변경 항목 감시는 주기적으로 탐색하지 않아도 대부분의 변경 항목을 탐지합니다.",
     "When adding a new device, keep in mind that this device must be added on the other side too.": "새 기기를 추가할 때는 추가한 기기에서도 현재 기기를 추가해야 합니다.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "새 폴더를 추가할 때 폴더 식별자는 기기 간에 폴더를 묶어줍니다. 대소문자가 구분되며 모든 기기에서 동일해야 합니다.",
+    "When set to more than one on both devices, Syncthing will attempt to establish multiple concurrent connections. If the values differ, the highest will be used. Set to zero to let Syncthing decide.": "양쪽 기기에서 둘 이상으로 설정하면 Syncthing은 여러 개의 동시 연결을 설정하려고 시도합니다. 값이 서로 다르면 가장 높은 수가 적용됩니다. Syncthing이 결정하도록 하려면 0으로 설정하십시오.",
     "Yes": "예",
     "Yesterday": "어제",
     "You can also copy and paste the text into a new message manually.": "또한 내용을 복사해서 새 메시지에 직접 붙여 넣으셔도 됩니다.",
diff --git a/gui/default/assets/lang/lang-nl.json b/gui/default/assets/lang/lang-nl.json
index d1aa998e3..cb524f0ad 100644
--- a/gui/default/assets/lang/lang-nl.json
+++ b/gui/default/assets/lang/lang-nl.json
@@ -65,6 +65,7 @@
     "Configured": "Geconfigureerd",
     "Connected (Unused)": "Verbonden (niet gebruikt)",
     "Connection Error": "Verbindingsfout",
+    "Connection Management": "Verbindingsbeheer",
     "Connection Type": "Soort verbinding",
     "Connections": "Verbindingen",
     "Connections via relays might be rate limited by the relay": "Verbindingen via relays kunnen worden beperkt door de relay",
@@ -259,6 +260,7 @@
     "No upgrades": "Geen upgrades",
     "Not shared": "Niet gedeeld",
     "Notice": "Mededeling",
+    "Number of Connections": "Aantal verbindingen",
     "OK": "Ok",
     "Off": "Uit",
     "Oldest First": "Oudste eerst",
@@ -426,6 +428,7 @@
     "The interval, in seconds, for running cleanup in the versions directory. Zero to disable periodic cleaning.": "Het interval, in seconden, voor het uitvoeren van opruiming in de versie-map. Nul om de regelmatige schoonmaak uit te schakelen.",
     "The maximum age must be a number and cannot be blank.": "De maximumleeftijd moet een getal zijn en mag niet leeg zijn.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "De maximale tijd om een versie te bewaren (in dagen, instellen op 0 om versies voor altijd te bewaren).",
+    "The number of connections must be a non-negative number.": "Het aantal verbindingen moet een niet-negatief getal zijn.",
     "The number of days must be a number and cannot be blank.": "Het aantal dagen moet een getal zijn en mag niet leeg zijn.",
     "The number of days to keep files in the trash can. Zero means forever.": "Het aantal dagen om bestanden in de prullenbak te bewaren. Nul betekent voor altijd.",
     "The number of old versions to keep, per file.": "Het aantal te bewaren oude versies, per bestand.",
diff --git a/gui/default/assets/lang/lang-pl.json b/gui/default/assets/lang/lang-pl.json
index d02adbcc2..68122b58f 100644
--- a/gui/default/assets/lang/lang-pl.json
+++ b/gui/default/assets/lang/lang-pl.json
@@ -65,9 +65,10 @@
     "Configured": "Ustawiony",
     "Connected (Unused)": "Połączony (nieużywany)",
     "Connection Error": "Błąd połączenia",
+    "Connection Management": "Zarządzanie połączeniami",
     "Connection Type": "Rodzaj połączenia",
     "Connections": "Połączenia",
-    "Connections via relays might be rate limited by the relay": "Prędkość połączeń za pośrednictwem przekazywaczy może być ograniczona przez danego przekazywacza",
+    "Connections via relays might be rate limited by the relay": "Prędkość połączeń za pośrednictwem przekaźników może być ograniczona przez dany przekaźnik",
     "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Ciągłe obserwowanie zmian jest już dostępne w programie Syncthing. Będzie ono wykrywać zmiany na dysku i uruchamiać skanowanie tylko w zmodyfikowanych ścieżkach. Zalety tego rozwiązania są takie, że zmiany rozsyłane są szybciej oraz że wymagane jest mniej pełnych skanowań.",
     "Copied from elsewhere": "Skopiowane z innego miejsca",
     "Copied from original": "Skopiowane z pierwotnego pliku",
@@ -259,6 +260,7 @@
     "No upgrades": "Brak aktualizacji",
     "Not shared": "Niewspółdzielony",
     "Notice": "Powiadomienie",
+    "Number of Connections": "Liczba połączeń",
     "OK": "OK",
     "Off": "Wyłączona",
     "Oldest First": "Od najstarszych",
@@ -426,11 +428,13 @@
     "The interval, in seconds, for running cleanup in the versions directory. Zero to disable periodic cleaning.": "Przedział czasowy, w sekundach, w którym nastąpi czyszczenie katalogu wersjonowania. Ustaw na zero, aby wyłączyć czyszczenie okresowe.",
     "The maximum age must be a number and cannot be blank.": "Maksymalny wiek musi być wartością liczbową oraz nie może być pusty.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Maksymalny czas zachowania wersji (w dniach; ustaw na 0, aby zachować na zawsze).",
+    "The number of connections must be a non-negative number.": "Liczba połączeń musi być nieujemną wartością liczbową.",
     "The number of days must be a number and cannot be blank.": "Liczba dni musi być wartością liczbową oraz nie może być pusta.",
     "The number of days to keep files in the trash can. Zero means forever.": "Liczba dni, przez które pliki trzymane będą w koszu. Zero oznacza nieskończoność.",
     "The number of old versions to keep, per file.": "Liczba starszych wersji do zachowania, dla pojedynczego pliku.",
     "The number of versions must be a number and cannot be blank.": "Liczba wersji musi być wartością liczbową oraz nie może być pusta.",
     "The path cannot be blank.": "Ścieżka nie może być pusta.",
+    "The rate limit is applied to the accumulated traffic of all connections to this device.": "Ograniczenie prędkości dotyczy skumulowanego ruchu na wszystkich połączeniach z tym urządzeniem.",
     "The rate limit must be a non-negative number (0: no limit)": "Ograniczenie prędkości musi być nieujemną wartością liczbową (0: brak ograniczeń)",
     "The remote device has not accepted sharing this folder.": "Urządzenie zdalne nie wyraziło zgody na udostępnienie tego folderu.",
     "The remote device has paused this folder.": "Urządzenie zdalnie zatrzymało ten folder.",
@@ -499,6 +503,7 @@
     "Watching for changes discovers most changes without periodic scanning.": "Obserwowanie wykrywa większość zmian bez potrzeby okresowego skanowania.",
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Dodając nowe urządzenie pamiętaj, że musi ono zostać dodane także po drugiej stronie.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Dodając nowy folder pamiętaj, że identyfikator używany jest do parowania folderów pomiędzy urządzeniami. Wielkość liter ma znaczenie i musi być on identyczny na wszystkich urządzeniach.",
+    "When set to more than one on both devices, Syncthing will attempt to establish multiple concurrent connections. If the values differ, the highest will be used. Set to zero to let Syncthing decide.": "Jeśli na obu urządzeniach ustawiono wartość większą niż jeden, Syncthing podejmie próbę ustanowienia wielu jednoczesnych połączeń. Jeżeli wartości się różnią, zostanie użyta najwyższa. Ustaw na zero, aby to Syncthing zdecydował.",
     "Yes": "Tak",
     "Yesterday": "Wczoraj",
     "You can also copy and paste the text into a new message manually.": "Możesz również skopiować i wkleić ten tekst do nowej wiadomości ręcznie.",
diff --git a/gui/default/assets/lang/lang-pt-PT.json b/gui/default/assets/lang/lang-pt-PT.json
index 919cf1bc8..b1dca6561 100644
--- a/gui/default/assets/lang/lang-pt-PT.json
+++ b/gui/default/assets/lang/lang-pt-PT.json
@@ -65,6 +65,7 @@
     "Configured": "Configurado",
     "Connected (Unused)": "Conectado (não usado)",
     "Connection Error": "Erro de ligação",
+    "Connection Management": "Gestão de ligações",
     "Connection Type": "Tipo de ligação",
     "Connections": "Ligações",
     "Connections via relays might be rate limited by the relay": "Ligações via retransmissores podem ter a velocidade limitada pelo retransmissor",
@@ -259,6 +260,7 @@
     "No upgrades": "Sem actualizações",
     "Not shared": "Não partilhada",
     "Notice": "Avisos",
+    "Number of Connections": "Número de ligações",
     "OK": "OK",
     "Off": "Desligada",
     "Oldest First": "Primeiro os mais antigos",
@@ -426,11 +428,13 @@
     "The interval, in seconds, for running cleanup in the versions directory. Zero to disable periodic cleaning.": "O intervalo, em segundos, para executar limpezas na pasta das versões. Coloque zero para desactivar a limpeza periódica.",
     "The maximum age must be a number and cannot be blank.": "A idade máxima tem que ser um número e não pode estar vazia.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Tempo máximo, em dias, para manter uma versão (use 0 para manter a versão para sempre).",
+    "The number of connections must be a non-negative number.": "O número de ligações tem que ser um número não negativo.",
     "The number of days must be a number and cannot be blank.": "O número de dias tem que ser um número e não pode estar em branco.",
     "The number of days to keep files in the trash can. Zero means forever.": "O número de dias a manter os ficheiros no caixote do lixo. Zero significa para sempre.",
     "The number of old versions to keep, per file.": "O número de versões antigas a manter, por ficheiro.",
     "The number of versions must be a number and cannot be blank.": "O número de versões tem que ser um número e não pode estar vazio.",
     "The path cannot be blank.": "O caminho não pode estar vazio.",
+    "The rate limit is applied to the accumulated traffic of all connections to this device.": "O limite de velocidade é aplicado ao tráfego acumulado de todas as ligações a este dispositivo.",
     "The rate limit must be a non-negative number (0: no limit)": "O limite de velocidade tem que ser um número que não seja negativo (0: sem limite)",
     "The remote device has not accepted sharing this folder.": "O dispositivo remoto não aceitou a partilha desta pasta.",
     "The remote device has paused this folder.": "O dispositivo remoto colocou esta pasta em pausa.",
@@ -499,6 +503,7 @@
     "Watching for changes discovers most changes without periodic scanning.": "A vigilância de alterações descobre a maior parte das alterações sem a necessidade de fazer uma verificação periódica.",
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Quando adicionar um novo dispositivo, lembre-se que este dispositivo tem que ser adicionado do outro lado também.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Quando adicionar uma nova pasta, lembre-se que o ID da pasta é utilizado para ligar as pastas entre dispositivos. É sensível às diferenças entre maiúsculas e minúsculas e tem que ter uma correspondência perfeita entre todos os dispositivos.",
+    "When set to more than one on both devices, Syncthing will attempt to establish multiple concurrent connections. If the values differ, the highest will be used. Set to zero to let Syncthing decide.": "Quando definido para mais do que um em ambos os dispositivos, Syncthing irá tentar estabelecer múltiplas ligações concorrentes. Se os valores diferirem, será usado o maior. Defina como zero para deixar o Syncthing decidir.",
     "Yes": "Sim",
     "Yesterday": "Ontem",
     "You can also copy and paste the text into a new message manually.": "Também pode copiar e colar o texto numa nova mensagem manualmente.",
diff --git a/gui/default/assets/lang/lang-sk.json b/gui/default/assets/lang/lang-sk.json
index b23101478..e70fe913f 100644
--- a/gui/default/assets/lang/lang-sk.json
+++ b/gui/default/assets/lang/lang-sk.json
@@ -23,13 +23,14 @@
     "All Data": "Všetky dáta",
     "All Time": "Celé obdobie",
     "All folders shared with this device must be protected by a password, such that all sent data is unreadable without the given password.": "Všetky adresáre zdieľané s týmto zariadením musia byť chránené heslom, aby všetky odoslané dáta boli bez daného hesla nečitateľné.",
-    "Allow Anonymous Usage Reporting?": "Povoliť anoynmné hlásenia o použivaní?",
+    "Allow Anonymous Usage Reporting?": "Povoliť anonymné hlásenia o používaní?",
     "Allowed Networks": "Povolené siete",
     "Alphabetic": "Abecedne",
     "Altered by ignoring deletes.": "Zmenené ignorovaním zmazaných.",
     "An external command handles the versioning. It has to remove the file from the shared folder. If the path to the application contains spaces, it should be quoted.": "Externý príkaz sa stará o vytváranie verzií. Musí odstrániť súbor zo zdieľaného priečinka. Ak cesta k aplikácii obsahuje medzery, mala by byť v úvodzovkách.",
     "Anonymous Usage Reporting": "Anonymné hlásenie o používaní",
     "Anonymous usage report format has changed. Would you like to move to the new format?": "Formát anonymného hlásenia o používaní sa zmenil. Chcete prejsť na nový formát?",
+    "Applied to LAN": "Použité pre LAN",
     "Apply": "Použiť",
     "Are you sure you want to override all remote changes?": "Ste si istý, že chcete prepísať všetky vzdialené zmeny?",
     "Are you sure you want to permanently delete all these files?": "Určite chcete vymazať všetky tieto súbory?",
@@ -39,8 +40,8 @@
     "Are you sure you want to revert all local changes?": "Naozaj chcete vrátiť všetky lokálne zmeny?",
     "Are you sure you want to upgrade?": "Určite chcete aktualizovať?",
     "Authors": "Autori",
-    "Auto Accept": "Automatické prijatie",
-    "Automatic Crash Reporting": "Automatické hlásenie chýb",
+    "Auto Accept": "Automaticky prijať",
+    "Automatic Crash Reporting": "Automatické hlásenie zlyhania",
     "Automatic upgrade now offers the choice between stable releases and release candidates.": "Automatická aktualizácia teraz ponúka voľbu medzi stabilnými vydaniami a kandidátmi na vydanie.",
     "Automatic upgrades": "Automatické aktualizácie",
     "Automatic upgrades are always enabled for candidate releases.": "Automatické aktualizácie sú vždy povolené pre kandidátske vydania.",
@@ -50,7 +51,7 @@
     "Body:": "Obsah:",
     "Bugs": "Chyby",
     "Cancel": "Zrušiť",
-    "Changelog": "Záznam zmien",
+    "Changelog": "Zoznam zmien",
     "Clean out after": "Vyčistiť po",
     "Cleaning Versions": "Čistenie verzií",
     "Cleanup Interval": "Interval čistenia",
@@ -64,10 +65,11 @@
     "Configured": "Nakonfigurované",
     "Connected (Unused)": "Pripojené (Nepoužité)",
     "Connection Error": "Chyba pripojenia",
+    "Connection Management": "Správa pripojení",
     "Connection Type": "Typ pripojenia",
     "Connections": "Pripojenia",
     "Connections via relays might be rate limited by the relay": "Pripojenia cez relé môžu byť obmedzené rýchlosťou relé",
-    "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Nepretržité sledovanie zmien je už dostupné. Tým sa skenovanie spustí iba pre zmenené súbory. Výhoda je, že týmto spôsobom sa rýchlejšie šíria zmeny a nie je potrebných toľko veľa úplných skenov.",
+    "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Syncthing odteraz umožňuje nepretržité sledovanie zmien. To zistí zmeny na disku a spustí skenovanie iba v pozmenených adresároch. Výhoda je, že týmto spôsobom sa rýchlejšie šíria zmeny a nie je potrebných toľko kompletných skenovaní.",
     "Copied from elsewhere": "Skoprírované odinakiaľ",
     "Copied from original": "Skopírované z originálu",
     "Copied!": "Skopírované!",
@@ -78,7 +80,7 @@
     "Danger!": "Pozor!",
     "Database Location": "Umiestnenie databázy",
     "Debugging Facilities": "Ladenie",
-    "Default": "Predvolené",
+    "Default": "Predvolená",
     "Default Configuration": "Predvolená konfigurácia",
     "Default Device": "Predvolené zariadenie",
     "Default Folder": "Predvolený priečinok",
@@ -101,7 +103,7 @@
     "Device that last modified the item": "Zariadenie, ktoré naposledy pozmenilo položku",
     "Devices": "Zariadenia",
     "Disable Crash Reporting": "Zakázať hlásenia o zlyhaní",
-    "Disabled": "Odpojené",
+    "Disabled": "Blokované",
     "Disabled periodic scanning and disabled watching for changes": "Zakázané pravidelné skenovanie a vypnuté sledovanie zmien",
     "Disabled periodic scanning and enabled watching for changes": "Zakázané pravidelné skenovanie a povolené sledovanie zmien",
     "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Zakázané pravidelné skenovanie a zlyhalo nastavenie sledovania zmien, opakovanie každú 1 m:",
@@ -205,6 +207,7 @@
     "Internally used paths:": "Interne používané cesty:",
     "Introduced By": "Uvedené",
     "Introducer": "Uvádzač",
+    "Introduction": "Uvedenie",
     "Inversion of the given condition (i.e. do not exclude)": "Inverzia danej podmienky (napr. nevynechať)",
     "Keep Versions": "Ponechanie verzií",
     "LDAP": "LDAP",
@@ -257,6 +260,7 @@
     "No upgrades": "Bez aktualizácií",
     "Not shared": "Nezdieľané",
     "Notice": "Oznámenie",
+    "Number of Connections": "Počet pripojení",
     "OK": "OK",
     "Off": "Vypnúť",
     "Oldest First": "Najstarší najprv",
@@ -324,6 +328,7 @@
     "Revert": "Vrátiť späť",
     "Revert Local Changes": "Vrátiť lokálne zmeny",
     "Save": "Uložiť",
+    "Saving changes": "Ukladanie zmien",
     "Scan Time Remaining": "Zostávajúci čas skenovania",
     "Scanning": "Skenovanie",
     "See external versioning help for supported templated command line parameters.": "Podporované šablónové parametre príkazového riadka nájdete v pomocníkovi pre externú správu verzií.",
@@ -390,6 +395,7 @@
     "Syncthing is listening on the following network addresses for connection attempts from other devices:": "Syncthing načúva pre pokusy o pripojenie z iných zariadení na týchto sieťových adresách:",
     "Syncthing is not listening for connection attempts from other devices on any address.  Only outgoing connections from this device may work.": "Syncthing nenačúva pre pokusy o pripojenie z iných zariadení na žiadnej adrese. Môžu fungovať iba odchádzajúce spojenia z tohto zariadenia.",
     "Syncthing is restarting.": "Syncthing sa reštartuje.",
+    "Syncthing is saving changes.": "Syncthing ukladá zmeny.",
     "Syncthing is upgrading.": "Syncthing sa aktualizuje.",
     "Syncthing now supports automatically reporting crashes to the developers. This feature is enabled by default.": "Syncthing teraz podporuje automatické hlásenie pádov vývojárom. Táto funkcia je predvolene povolená.",
     "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing se zdá byť nefunkčný, alebo je problém s internetovým pripojením. Opakujem…",
@@ -422,11 +428,13 @@
     "The interval, in seconds, for running cleanup in the versions directory. Zero to disable periodic cleaning.": "Interval v sekundách pre spustenie čistenia v adresári s verziami. Nula čistenie vypína.",
     "The maximum age must be a number and cannot be blank.": "Maximálny vek musí byť číslo a nemôže byť prázdne.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Maximálny čas na uchovanie verzie (v dňoch, nastavte na 0, ak chcete verzie zachovať navždy).",
+    "The number of connections must be a non-negative number.": "Počet pripojení musí byť kladné číslo.",
     "The number of days must be a number and cannot be blank.": "Počet dní musí byť číslo a nemôže byť prázdny.",
     "The number of days to keep files in the trash can. Zero means forever.": "Počet dní pre uchovanie súborov v koši. Nula znamená navždy.",
     "The number of old versions to keep, per file.": "Počet uchovávaných starších verzií pre každý súbor.",
     "The number of versions must be a number and cannot be blank.": "Počet verzií musí byť číslo a nemôže byť prázdny.",
     "The path cannot be blank.": "Cesta nemôže byť prázdna.",
+    "The rate limit is applied to the accumulated traffic of all connections to this device.": "Obmedzenie rýchlosti sa uplatňuje na celkovú prevádzku všetkých pripojení k tomuto zariadeniu.",
     "The rate limit must be a non-negative number (0: no limit)": "Limit rýchlosti musí byť kladné číslo (0: bez limitu)",
     "The remote device has not accepted sharing this folder.": "Vzdialené zariadenie neprijalo zdieľanie tohto priečinka.",
     "The remote device has paused this folder.": "Vzdialené zariadenie pozastavilo tento priečinok.",
@@ -457,7 +465,7 @@
     "Unexpected items have been found in this folder.": "V tomto priečinku sa našli neočakávané položky.",
     "Unignore": "Prestať ignorovať",
     "Unknown": "Neznáme",
-    "Unshared": "Nezdieľané",
+    "Unshared": "Ukončené zdieľanie",
     "Unshared Devices": "Nezdieľané zariadenia",
     "Unshared Folders": "Nezdieľané priečinky",
     "Untrusted": "Nedôveryhodný",
@@ -495,6 +503,7 @@
     "Watching for changes discovers most changes without periodic scanning.": "Sledovanie zmien odhalí väčšinu zmien bez pravidelného skenovania.",
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Pri pridávaní nového zariadenia majte na pamäti, že toto zariadenie musíte pridať aj na druhej strane.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Pri pridávaní nového priečinka majte na pamäti, že ID priečinka sa používa na prepojenie priečinkov medzi zariadeniami. Rozlišujú veľké a malé písmená a musia sa presne zhodovať medzi všetkými zariadeniami.",
+    "When set to more than one on both devices, Syncthing will attempt to establish multiple concurrent connections. If the values differ, the highest will be used. Set to zero to let Syncthing decide.": "Pri nastavení na viac ako jedno na oboch zariadeniach sa Syncthing pokúsi vytvoriť viacero súbežných pripojení. Ak sa hodnoty líšia, použije sa najvyššia. Pri nastavení na nulu rozhoduje Syncthing.",
     "Yes": "Áno",
     "Yesterday": "Včera",
     "You can also copy and paste the text into a new message manually.": "Text môžete do novej správy skopírovať a vložiť aj ručne.",
@@ -520,10 +529,10 @@
     "modified": "zmenené",
     "permit": "povolenie",
     "seconds": "sekúnd",
-    "theme-name-black": "Čierny",
-    "theme-name-dark": "Tmavý",
+    "theme-name-black": "Čierna",
+    "theme-name-dark": "Tmavé",
     "theme-name-default": "Predvolené",
-    "theme-name-light": "Svetlý",
+    "theme-name-light": "Svetlá",
     "{%device%} wants to share folder \"{%folder%}\".": "{{device}} chce zdieľať adresár \"{{folder}}\".",
     "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{device}} chce zdieľať adresár \"{{folderlabel}}\" ({{folder}}).",
     "{%reintroducer%} might reintroduce this device.": "{{reintroducer}} môže znova uviesť toto zariadenie."
diff --git a/gui/default/assets/lang/lang-tr.json b/gui/default/assets/lang/lang-tr.json
index 33b49bd70..ae611f141 100644
--- a/gui/default/assets/lang/lang-tr.json
+++ b/gui/default/assets/lang/lang-tr.json
@@ -65,9 +65,10 @@
     "Configured": "Yapılandırıldı",
     "Connected (Unused)": "Bağlandı (Kullanımda Değil)",
     "Connection Error": "Bağlantı Hatası",
+    "Connection Management": "Bağlantı Yönetimi",
     "Connection Type": "Bağlantı Türü",
     "Connections": "Bağlantılar",
-    "Connections via relays might be rate limited by the relay": "Geçişler aracılığıyla yapılan bağlantılar, geçiş tarafından oranı sınırlandırılmış olabilir",
+    "Connections via relays might be rate limited by the relay": "Geçişler aracılığıyla yapılan bağlantılar, geçiş tarafından hızı sınırlandırılmış olabilir",
     "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Sürekli olarak değişiklikleri izlemek artık Syncthing içinde mevcut. Bu, diskteki değişiklikleri algılayacak ve yalnızca değiştirilen yollarda bir tarama gerçekleştirecek. Yararları, değişikliklerin daha hızlı yayılması ve daha az tam tarama gerekmesidir.",
     "Copied from elsewhere": "Başka bir yerden kopyalandı",
     "Copied from original": "Orijinalinden kopyalandı",
@@ -259,6 +260,7 @@
     "No upgrades": "Yükseltmeler yok",
     "Not shared": "Paylaşılmamış",
     "Notice": "Bildirim",
+    "Number of Connections": "Bağlantı Sayısı",
     "OK": "TAMAM",
     "Off": "Kapalı",
     "Oldest First": "Önce En Eski Olan",
@@ -426,11 +428,13 @@
     "The interval, in seconds, for running cleanup in the versions directory. Zero to disable periodic cleaning.": "Sürüm dizininde temizlemeyi çalıştırmak için saniye olarak aralık değeri. Düzenli temizliği etkisizleştirmek için sıfır.",
     "The maximum age must be a number and cannot be blank.": "En fazla yaş bir sayı olmak zorundadır ve boş bırakılamaz.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Bir sürümü tutmak için en fazla süre (gün olarak, sürümleri süresiz tutmak için 0'a ayarlayın).",
+    "The number of connections must be a non-negative number.": "Bağlantı sayısı negatif olmayan bir sayı olmak zorundadır.",
     "The number of days must be a number and cannot be blank.": "Gün sayısı bir sayı olmak zorundadır ve boş olamaz.",
     "The number of days to keep files in the trash can. Zero means forever.": "Dosyaları çöp kutusunda tutmak için gün sayısı. Sıfır süresiz demektir.",
     "The number of old versions to keep, per file.": "Dosya başına tutulacak eski sürüm sayısı.",
     "The number of versions must be a number and cannot be blank.": "Sürüm sayısı bir sayı olmak zorundadır ve boş bırakılamaz.",
     "The path cannot be blank.": "Yol boş olamaz.",
+    "The rate limit is applied to the accumulated traffic of all connections to this device.": "Hız sınırı, bu cihaza yapılan tüm bağlantıların toplam trafiğine uygulanır.",
     "The rate limit must be a non-negative number (0: no limit)": "Hız sınırı negatif olmayan bir sayı olmak zorundadır (0: sınır yok)",
     "The remote device has not accepted sharing this folder.": "Uzak cihaz bu klasörü paylaşmayı kabul etmedi.",
     "The remote device has paused this folder.": "Uzak cihaz bu klasörü duraklattı.",
@@ -499,6 +503,7 @@
     "Watching for changes discovers most changes without periodic scanning.": "Değişiklikleri izleme, düzenli tarama yapmadan çoğu değişikliği keşfeder.",
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Yeni bir cihaz eklerken, bu cihazın karşı tarafa da eklenmek zorunda olduğunu unutmayın.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Yeni bir klasör eklerken, Klasör Kimliği'nin klasörleri cihazlar arasında bağlamak için kullanıldığını unutmayın. Büyük/küçük harf duyarlıdırlar ve tüm cihazlarda tam olarak eşleşmek zorundadırlar.",
+    "When set to more than one on both devices, Syncthing will attempt to establish multiple concurrent connections. If the values differ, the highest will be used. Set to zero to let Syncthing decide.": "Her iki cihazda da birden fazlaya ayarlandığında, Syncthing birden çok eşzamanlı bağlantı kurmaya çalışacaktır. Eğer değerler farklıysa, en yüksek olanı kullanılacaktır. Syncthing'in karar vermesine izin vermek için sıfıra ayarlayın.",
     "Yes": "Evet",
     "Yesterday": "Dün",
     "You can also copy and paste the text into a new message manually.": "Ayrıca metni el ile kopyalayabilir ve yeni bir iletiye yapıştırabilirsiniz.",
diff --git a/gui/default/assets/lang/lang-zh-CN.json b/gui/default/assets/lang/lang-zh-CN.json
index a52e8298c..98ca21083 100644
--- a/gui/default/assets/lang/lang-zh-CN.json
+++ b/gui/default/assets/lang/lang-zh-CN.json
@@ -65,6 +65,7 @@
     "Configured": "已配置",
     "Connected (Unused)": "已连接（未使用）",
     "Connection Error": "连接出错",
+    "Connection Management": "连接管理",
     "Connection Type": "连接类型",
     "Connections": "连接",
     "Connections via relays might be rate limited by the relay": "经由中继的连接可能会被中继限制速率",
@@ -259,6 +260,7 @@
     "No upgrades": "无更新",
     "Not shared": "不共享",
     "Notice": "提示",
+    "Number of Connections": "连接数",
     "OK": "确定",
     "Off": "关闭",
     "Oldest First": "旧文件优先",
@@ -426,11 +428,13 @@
     "The interval, in seconds, for running cleanup in the versions directory. Zero to disable periodic cleaning.": "在版本目录中运行清理的间隔（秒）。0表示禁用定期清除。",
     "The maximum age must be a number and cannot be blank.": "最长保留时间必须为数字，且不能为空。",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "历史版本保留的最长天数，0 为永久保存。",
+    "The number of connections must be a non-negative number.": "连接数必须是非负数。",
     "The number of days must be a number and cannot be blank.": "天数必须为数字，且不能为空。",
     "The number of days to keep files in the trash can. Zero means forever.": "文件保存在回收站的天数。零表示永久。",
     "The number of old versions to keep, per file.": "每个文件保留的版本数量上限。",
     "The number of versions must be a number and cannot be blank.": "保留版本数量必须为数字，且不能为空。",
     "The path cannot be blank.": "路径不能为空。",
+    "The rate limit is applied to the accumulated traffic of all connections to this device.": "到这台设备所有连接的累计流量被实施了速率限制。",
     "The rate limit must be a non-negative number (0: no limit)": "传输速度限制为非负整数（0 表示不限制）",
     "The remote device has not accepted sharing this folder.": "远程设备尚未允许分享此文件夹。",
     "The remote device has paused this folder.": "远程设备已停用此文件夹。",
@@ -499,6 +503,7 @@
     "Watching for changes discovers most changes without periodic scanning.": "对更改的监视无需定期扫描就可以发现大多数更改。",
     "When adding a new device, keep in mind that this device must be added on the other side too.": "若您在本机添加新设备，记住您也必须在这个新设备上添加本机。",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "若你添加了新文件夹，记住文件夹 ID 是用以在不同设备间建立联系的。在不同设备间拥有相同 ID 的文件夹将会被同步。且文件夹 ID 区分大小写。",
+    "When set to more than one on both devices, Syncthing will attempt to establish multiple concurrent connections. If the values differ, the highest will be used. Set to zero to let Syncthing decide.": "当两台设备上的连接数均被设为大于 1 时，Syncthing 会尝试建立多个并行连接。如果两台设备上的设置的连接数不同，则会使用最大的连接数。设为 0 表示让 Syncthing 自行决定。",
     "Yes": "是",
     "Yesterday": "昨天",
     "You can also copy and paste the text into a new message manually.": "你也可以手动将文本复制并粘贴到新消息中。",
diff --git a/gui/default/syncthing/core/aboutModalView.html b/gui/default/syncthing/core/aboutModalView.html
index 3689347bc..ce222bb07 100644
--- a/gui/default/syncthing/core/aboutModalView.html
+++ b/gui/default/syncthing/core/aboutModalView.html
@@ -26,7 +26,7 @@
         <h4 class="text-center" translate>The Syncthing Authors</h4>
         <div class="row">
           <div class="col-md-12" id="contributor-list">
-Jakob Borg, Audrius Butkevicius, Jesse Lucas, Simon Frei, Alexander Graf, Alexandre Viau, Anderson Mesquita, André Colomb, Antony Male, Ben Schulz, Caleb Callaway, Daniel Harte, Evgeny Kuznetsov, Lars K.W. Gohlke, Lode Hoste, Michael Ploujnikov, Nate Morrison, Philippe Schommers, Ryan Sullivan, Sergey Mishin, Stefan Tatschner, Tomasz Wilczyński, Wulf Weich, bt90, greatroar, Aaron Bieber, Adam Piggott, Adel Qalieh, Alan Pope, Alberto Donato, Aleksey Vasenev, Alessandro G., Alex Lindeman, Alex Xu, Alexander Seiler, Alexandre Alves, Aman Gupta, Andreas Sommer, Andrew Dunham, Andrew Meyer, Andrew Rabert, Andrey D, Anjan Momi, Anthony Goeckner, Antoine Lamielle, Anur, Aranjedeath, Arkadiusz Tymiński, Aroun, Arthur Axel fREW Schmidt, Artur Zubilewicz, Aurélien Rainone, BAHADIR YILMAZ, Bart De Vries, Ben Curthoys, Ben Shepherd, Ben Sidhom, Benedikt Heine, Benedikt Morbach, Benjamin Nater, Benno Fünfstück, Benny Ng, Boqin Qin, Boris Rybalkin, Brandon Philips, Brendan Long, Brian R. Becker, Carsten Hagemann, Cathryne Linenweaver, Cedric Staniewski, Chih-Hsuan Yen, Choongkyu, Chris Howie, Chris Joel, Chris Tonkinson, Christian Kujau, Christian Prescott, Colin Kennedy, Cromefire_, Cyprien Devillez, Dale Visser, Dan, Daniel Barczyk, Daniel Bergmann, Daniel Martí, Darshil Chanpura, David Rimmer, Denis A., Dennis Wilson, Devon G. Redekopp, Dimitri Papadopoulos Orfanos, Dmitry Saveliev, Domenic Horner, Dominik Heidler, Elias Jarlebring, Elliot Huffman, Emil Hessman, Emil Lundberg, Eng Zer Jun, Eric Lesiuta, Eric P, Erik Meitner, Evan Spensley, Federico Castagnini, Felix, Felix Ableitner, Felix Lampe, Felix Unterpaintner, Francois-Xavier Gsell, Frank Isemann, Gahl Saraf, Gilli Sigurdsson, Gleb Sinyavskiy, Graham Miln, Greg, Han Boetes, HansK-p, Harrison Jones, Heiko Zuerker, Hugo Locurcio, Iain Barnett, Ian Johnson, Ikko Ashimine, Ilya Brin, Iskander Sharipov, Jaakko Hannikainen, Jacek Szafarkiewicz, Jack Croft, Jacob, Jake Peterson, James O'Beirne, James Patterson, Jaroslav Lichtblau, Jaroslav Malec, Jauder Ho, Jaya Chithra, Jaya Kumar, Jeffery To, Jens Diemer, Jerry Jacobs, Jochen Voss, Johan Andersson, Johan Vromans, John Rinehart, Jonas Thelemann, Jonathan, Jonathan Cross, Jonta, Jose Manuel Delicado, Jörg Thalheim, Jędrzej Kula, K.B.Dharun Krishna, Kalle Laine, Karol Różycki, Kebin Liu, Keith Harrison, Keith Turner, Kelong Cong, Ken'ichi Kamada, Kevin Allen, Kevin Bushiri, Kevin White, Jr., Kurt Fitzner, LSmithx2, Lars Lehtonen, Laurent Arnoud, Laurent Etiemble, Leo Arias, Liu Siyuan, Lord Landon Agahnim, Lukas Lihotzki, Majed Abdulaziz, Marc Laporte, Marc Pujol, Marcin Dziadus, Marcus Legendre, Mario Majila, Mark Pulford, Martchus, Mateusz Naściszewski, Mateusz Ż, Matic Potočnik, Matt Burke, Matt Robenolt, Matteo Ruina, Maurizio Tomasi, Max, Max Schulze, MaximAL, Maxime Thirouin, Maximilian, MichaIng, Michael Jephcote, Michael Rienstra, Michael Tilli, Migelo, Mike Boone, MikeLund, MikolajTwarog, Mingxuan Lin, Naveen, Nicholas Rishel, Nick Busey, Nico Stapelbroek, Nicolas Braud-Santoni, Nicolas Perraut, Niels Peter Roest, Nils Jakobi, NinoM4ster, Nitroretro, NoLooseEnds, Oliver Freyermuth, Otiel, Oyebanji Jacob Mayowa, Pablo, Pascal Jungblut, Paul Brit, Pawel Palenica, Paweł Rozlach, Peter Badida, Peter Dave Hello, Peter Hoeg, Peter Marquardt, Phani Rithvij, Phil Davis, Phill Luby, Pier Paolo Ramon, Piotr Bejda, Pramodh KP, Quentin Hibon, Rahmi Pruitt, Richard Hartmann, Robert Carosi, Roberto Santalla, Robin Schoonover, Roman Zaynetdinov, Ross Smith II, Ruslan Yevdokymov, Ryan Qian, Sacheendra Talluri, Scott Klupfel, Shaarad Dalvi, Simon Mwepu, Sly_tom_cat, Stefan Kuntz, Steven Eckhoff, Suhas Gundimeda, Taylor Khan, Thomas Hipp, Tim Abell, Tim Howes, Tobias Klauser, Tobias Nygren, Tobias Tom, Tom Jakubowski, Tommy Thorn, Tully Robinson, Tyler Brazier, Tyler Kropp, Unrud, Veeti Paananen, Victor Buinsky, Vik, Vil Brekin, Vladimir Rusinov, Will Rouesnel, William A. Kennington III, Xavier O., Yannic A., andresvia, andyleap, boomsquared, chenrui, chucic, cui fliter, derekriemer, desbma, entity0xfe, georgespatton, ghjklw, guangwu, ignacy123, janost, jaseg, jelle van der Waa, jtagcat, klemens, luzpaz, marco-m, mclang, mv1005, otbutz, overkill, perewa, red_led, rubenbe, sec65, villekalliomaki, wangguoliang, wouter bolsterlee, xarx00, xjtdy888, 佛跳墙, 落心
+Jakob Borg, Audrius Butkevicius, Jesse Lucas, Simon Frei, Tomasz Wilczyński, Alexander Graf, Alexandre Viau, Anderson Mesquita, André Colomb, Antony Male, Ben Schulz, Caleb Callaway, Daniel Harte, Evgeny Kuznetsov, Lars K.W. Gohlke, Lode Hoste, Michael Ploujnikov, Nate Morrison, Philippe Schommers, Ryan Sullivan, Sergey Mishin, Stefan Tatschner, Wulf Weich, bt90, greatroar, Aaron Bieber, Adam Piggott, Adel Qalieh, Alan Pope, Alberto Donato, Aleksey Vasenev, Alessandro G., Alex Lindeman, Alex Xu, Alexander Seiler, Alexandre Alves, Aman Gupta, Andreas Sommer, Andrew Dunham, Andrew Meyer, Andrew Rabert, Andrey D, Anjan Momi, Anthony Goeckner, Antoine Lamielle, Anur, Aranjedeath, Arkadiusz Tymiński, Aroun, Arthur Axel fREW Schmidt, Artur Zubilewicz, Aurélien Rainone, BAHADIR YILMAZ, Bart De Vries, Ben Curthoys, Ben Shepherd, Ben Sidhom, Benedikt Heine, Benedikt Morbach, Benjamin Nater, Benno Fünfstück, Benny Ng, Boqin Qin, Boris Rybalkin, Brandon Philips, Brendan Long, Brian R. Becker, Carsten Hagemann, Cathryne Linenweaver, Cedric Staniewski, Chih-Hsuan Yen, Choongkyu, Chris Howie, Chris Joel, Chris Tonkinson, Christian Kujau, Christian Prescott, Colin Kennedy, Cromefire_, Cyprien Devillez, Dale Visser, Dan, Daniel Barczyk, Daniel Bergmann, Daniel Martí, Darshil Chanpura, David Rimmer, Denis A., Dennis Wilson, Devon G. Redekopp, Dimitri Papadopoulos Orfanos, Dmitry Saveliev, Domenic Horner, Dominik Heidler, Elias Jarlebring, Elliot Huffman, Emil Hessman, Emil Lundberg, Eng Zer Jun, Eric Lesiuta, Eric P, Erik Meitner, Evan Spensley, Federico Castagnini, Felix, Felix Ableitner, Felix Lampe, Felix Unterpaintner, Francois-Xavier Gsell, Frank Isemann, Gahl Saraf, Gilli Sigurdsson, Gleb Sinyavskiy, Graham Miln, Greg, Han Boetes, HansK-p, Harrison Jones, Heiko Zuerker, Hugo Locurcio, Iain Barnett, Ian Johnson, Ikko Ashimine, Ilya Brin, Iskander Sharipov, Jaakko Hannikainen, Jacek Szafarkiewicz, Jack Croft, Jacob, Jake Peterson, James O'Beirne, James Patterson, Jaroslav Lichtblau, Jaroslav Malec, Jauder Ho, Jaya Chithra, Jaya Kumar, Jeffery To, Jens Diemer, Jerry Jacobs, Jochen Voss, Johan Andersson, Johan Vromans, John Rinehart, Jonas Thelemann, Jonathan, Jonathan Cross, Jonta, Jose Manuel Delicado, Jörg Thalheim, Jędrzej Kula, K.B.Dharun Krishna, Kalle Laine, Karol Różycki, Kebin Liu, Keith Harrison, Keith Turner, Kelong Cong, Ken'ichi Kamada, Kevin Allen, Kevin Bushiri, Kevin White, Jr., Kurt Fitzner, LSmithx2, Lars Lehtonen, Laurent Arnoud, Laurent Etiemble, Leo Arias, Liu Siyuan, Lord Landon Agahnim, Lukas Lihotzki, Majed Abdulaziz, Marc Laporte, Marc Pujol, Marcin Dziadus, Marcus Legendre, Mario Majila, Mark Pulford, Martchus, Mateusz Naściszewski, Mateusz Ż, Matic Potočnik, Matt Burke, Matt Robenolt, Matteo Ruina, Maurizio Tomasi, Max, Max Schulze, MaximAL, Maxime Thirouin, Maximilian, MichaIng, Michael Jephcote, Michael Rienstra, Michael Tilli, Migelo, Mike Boone, MikeLund, MikolajTwarog, Mingxuan Lin, Naveen, Nicholas Rishel, Nick Busey, Nico Stapelbroek, Nicolas Braud-Santoni, Nicolas Perraut, Niels Peter Roest, Nils Jakobi, NinoM4ster, Nitroretro, NoLooseEnds, Oliver Freyermuth, Otiel, Oyebanji Jacob Mayowa, Pablo, Pascal Jungblut, Paul Brit, Pawel Palenica, Paweł Rozlach, Peter Badida, Peter Dave Hello, Peter Hoeg, Peter Marquardt, Phani Rithvij, Phil Davis, Phill Luby, Pier Paolo Ramon, Piotr Bejda, Pramodh KP, Quentin Hibon, Rahmi Pruitt, Richard Hartmann, Robert Carosi, Roberto Santalla, Robin Schoonover, Roman Zaynetdinov, Ross Smith II, Ruslan Yevdokymov, Ryan Qian, Sacheendra Talluri, Scott Klupfel, Shaarad Dalvi, Simon Mwepu, Sly_tom_cat, Stefan Kuntz, Steven Eckhoff, Suhas Gundimeda, Taylor Khan, Thomas Hipp, Tim Abell, Tim Howes, Tobias Klauser, Tobias Nygren, Tobias Tom, Tom Jakubowski, Tommy Thorn, Tully Robinson, Tyler Brazier, Tyler Kropp, Unrud, Veeti Paananen, Victor Buinsky, Vik, Vil Brekin, Vladimir Rusinov, Will Rouesnel, William A. Kennington III, Xavier O., Yannic A., andresvia, andyleap, boomsquared, chenrui, chucic, cui fliter, derekriemer, desbma, entity0xfe, georgespatton, ghjklw, guangwu, ignacy123, janost, jaseg, jelle van der Waa, jtagcat, klemens, luzpaz, marco-m, mclang, mv1005, otbutz, overkill, perewa, red_led, rubenbe, sec65, villekalliomaki, wangguoliang, wouter bolsterlee, xarx00, xjtdy888, 佛跳墙, 落心
           </div>
         </div>
       </div>
diff --git a/man/stdiscosrv.1 b/man/stdiscosrv.1
index db42f8c36..48e14e80b 100644
--- a/man/stdiscosrv.1
+++ b/man/stdiscosrv.1
@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "STDISCOSRV" "1" "Sep 07, 2023" "v1.24.0" "Syncthing"
+.TH "STDISCOSRV" "1" "Sep 17, 2023" "v1.24.0" "Syncthing"
 .SH NAME
 stdiscosrv \- Syncthing Discovery Server
 .SH SYNOPSIS
@@ -114,7 +114,7 @@ entry from the list.
 .SS Description
 .sp
 This guide assumes that you have already set up Syncthing. If you
-haven’t yet, head over to getting\-started first.
+haven’t yet, head over to \fI\%Getting Started\fP first.
 .SS Installing
 .sp
 Go to \fI\%releases\fP <\fBhttps://github.com/syncthing/discosrv/releases\fP> and
@@ -398,7 +398,7 @@ server {
         ssl_dhparam /path/to/dhparam;
 
         # HSTS (ngx_http_headers_module is required) (63072000 seconds)
-        add_header Strict\-Transport\-Security "max\-age=63072000" always;
+        add_header Strict\-Transport\-Security \(dqmax\-age=63072000\(dq always;
 
         location / {
                 proxy_pass http://discovery.example.com;
@@ -421,7 +421,7 @@ The following lines must be added to the configuration:
 .ft C
 SSLProxyEngine On
 SSLVerifyClient optional_no_ca
-RequestHeader set X\-SSL\-Cert "%{SSL_CLIENT_CERT}s"
+RequestHeader set X\-SSL\-Cert \(dq%{SSL_CLIENT_CERT}s\(dq
 .ft P
 .fi
 .UNINDENT
diff --git a/man/strelaysrv.1 b/man/strelaysrv.1
index 9d0faa032..5a4cae3eb 100644
--- a/man/strelaysrv.1
+++ b/man/strelaysrv.1
@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "STRELAYSRV" "1" "Sep 07, 2023" "v1.24.0" "Syncthing"
+.TH "STRELAYSRV" "1" "Sep 17, 2023" "v1.24.0" "Syncthing"
 .SH NAME
 strelaysrv \- Syncthing Relay Server
 .SH SYNOPSIS
@@ -202,7 +202,7 @@ $ sudo \-u strelaysrv /usr/local/bin/strelaysrv \-keys /etc/strelaysrv
 .sp
 This creates a user \fBstrelaysrv\fP and a directory \fB/etc/strelaysrv\fP to store
 the keys. The keys are generated on first startup. The relay will join the
-global relay pool, unless a \fB\-pools=""\fP argument is given.
+global relay pool, unless a \fB\-pools=\(dq\(dq\fP argument is given.
 .sp
 To make the relay server start automatically at boot, use the recommended
 procedure for your operating system.
@@ -272,7 +272,7 @@ COMMIT
 .UNINDENT
 .UNINDENT
 .sp
-You will need to start \fBstrelaysrv\fP with \fB\-ext\-address ":443"\fP\&. This tells
+You will need to start \fBstrelaysrv\fP with \fB\-ext\-address \(dq:443\(dq\fP\&. This tells
 \fBstrelaysrv\fP that it can be contacted on port 443, even though it is listening
 on port 22067. You will also need to let both port 443 and 22067 through your
 firewall.
diff --git a/man/syncthing-bep.7 b/man/syncthing-bep.7
index 03d5042c1..830208514 100644
--- a/man/syncthing-bep.7
+++ b/man/syncthing-bep.7
@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-BEP" "7" "Sep 07, 2023" "v1.24.0" "Syncthing"
+.TH "SYNCTHING-BEP" "7" "Sep 17, 2023" "v1.24.0" "Syncthing"
 .SH NAME
 syncthing-bep \- Block Exchange Protocol v1
 .SH INTRODUCTION AND DEFINITIONS
@@ -389,7 +389,7 @@ The \fBencryption_password_token\fP field contains a token derived from the pass
 used to encrypt data sent to this device. If the device is the same as the
 device sending the message, it signifies that the device itself has encrypted
 data that was encrypted with the given token. It is empty or missing if there is
-no encryption. See untrusted for details on the encryption scheme.
+no encryption. See \fI\%Untrusted Device Encryption\fP for details on the encryption scheme.
 .SS Index and Index Update
 .sp
 The Index and Index Update messages define the contents of the senders
diff --git a/man/syncthing-config.5 b/man/syncthing-config.5
index 5b1ff0f98..10e196e75 100644
--- a/man/syncthing-config.5
+++ b/man/syncthing-config.5
@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-CONFIG" "5" "Sep 07, 2023" "v1.24.0" "Syncthing"
+.TH "SYNCTHING-CONFIG" "5" "Sep 17, 2023" "v1.24.0" "Syncthing"
 .SH NAME
 syncthing-config \- Syncthing Configuration
 .SH SYNOPSIS
@@ -115,13 +115,13 @@ may no longer correspond to the defaults.
 .sp
 .nf
 .ft C
-<configuration version="37">
-    <folder id="default" label="Default Folder" path="/Users/jb/Sync/" type="sendreceive" rescanIntervalS="3600" fsWatcherEnabled="true" fsWatcherDelayS="10" ignorePerms="false" autoNormalize="true">
+<configuration version=\(dq37\(dq>
+    <folder id=\(dqdefault\(dq label=\(dqDefault Folder\(dq path=\(dq/Users/jb/Sync/\(dq type=\(dqsendreceive\(dq rescanIntervalS=\(dq3600\(dq fsWatcherEnabled=\(dqtrue\(dq fsWatcherDelayS=\(dq10\(dq ignorePerms=\(dqfalse\(dq autoNormalize=\(dqtrue\(dq>
         <filesystemType>basic</filesystemType>
-        <device id="S7UKX27\-GI7ZTXS\-GC6RKUA\-7AJGZ44\-C6NAYEB\-HSKTJQK\-KJHU2NO\-CWV7EQW" introducedBy="">
+        <device id=\(dqS7UKX27\-GI7ZTXS\-GC6RKUA\-7AJGZ44\-C6NAYEB\-HSKTJQK\-KJHU2NO\-CWV7EQW\(dq introducedBy=\(dq\(dq>
             <encryptionPassword></encryptionPassword>
         </device>
-        <minDiskFree unit="%">1</minDiskFree>
+        <minDiskFree unit=\(dq%\(dq>1</minDiskFree>
         <versioning>
             <cleanupIntervalS>3600</cleanupIntervalS>
             <fsPath></fsPath>
@@ -153,18 +153,18 @@ may no longer correspond to the defaults.
         <syncXattrs>false</syncXattrs>
         <sendXattrs>false</sendXattrs>
     </folder>
-    <device id="S7UKX27\-GI7ZTXS\-GC6RKUA\-7AJGZ44\-C6NAYEB\-HSKTJQK\-KJHU2NO\-CWV7EQW" name="syno" compression="metadata" introducer="false" skipIntroductionRemovals="false" introducedBy="">
+    <device id=\(dqS7UKX27\-GI7ZTXS\-GC6RKUA\-7AJGZ44\-C6NAYEB\-HSKTJQK\-KJHU2NO\-CWV7EQW\(dq name=\(dqsyno\(dq compression=\(dqmetadata\(dq introducer=\(dqfalse\(dq skipIntroductionRemovals=\(dqfalse\(dq introducedBy=\(dq\(dq>
         <address>dynamic</address>
         <paused>false</paused>
         <autoAcceptFolders>false</autoAcceptFolders>
         <maxSendKbps>0</maxSendKbps>
         <maxRecvKbps>0</maxRecvKbps>
-        <ignoredFolder time="2022\-01\-09T19:09:52Z" id="br63e\-wyhb7" label="Foo"></ignoredFolder>
+        <ignoredFolder time=\(dq2022\-01\-09T19:09:52Z\(dq id=\(dqbr63e\-wyhb7\(dq label=\(dqFoo\(dq></ignoredFolder>
         <maxRequestKiB>0</maxRequestKiB>
         <untrusted>false</untrusted>
         <remoteGUIPort>0</remoteGUIPort>
     </device>
-    <gui enabled="true" tls="false" debugging="false">
+    <gui enabled=\(dqtrue\(dq tls=\(dqfalse\(dq debugging=\(dqfalse\(dq>
         <address>127.0.0.1:8384</address>
         <apikey>k1dnz1Dd0rzTBjjFFh7CXPnrF12C49B1</apikey>
         <theme>default</theme>
@@ -199,7 +199,7 @@ may no longer correspond to the defaults.
         <cacheIgnoredFiles>false</cacheIgnoredFiles>
         <progressUpdateIntervalS>5</progressUpdateIntervalS>
         <limitBandwidthInLan>false</limitBandwidthInLan>
-        <minHomeDiskFree unit="%">1</minHomeDiskFree>
+        <minHomeDiskFree unit=\(dq%\(dq>1</minHomeDiskFree>
         <releasesURL>https://upgrades.syncthing.net/meta.json</releasesURL>
         <overwriteRemoteDeviceNamesOnConnect>false</overwriteRemoteDeviceNamesOnConnect>
         <tempIndexMinBlocks>10</tempIndexMinBlocks>
@@ -220,14 +220,14 @@ may no longer correspond to the defaults.
         <connectionLimitMax>0</connectionLimitMax>
         <insecureAllowOldTLSVersions>false</insecureAllowOldTLSVersions>
     </options>
-    <remoteIgnoredDevice time="2022\-01\-09T20:02:01Z" id="5SYI2FS\-LW6YAXI\-JJDYETS\-NDBBPIO\-256MWBO\-XDPXWVG\-24QPUM4\-PDW4UQU" name="bugger" address="192.168.0.20:22000"></remoteIgnoredDevice>
+    <remoteIgnoredDevice time=\(dq2022\-01\-09T20:02:01Z\(dq id=\(dq5SYI2FS\-LW6YAXI\-JJDYETS\-NDBBPIO\-256MWBO\-XDPXWVG\-24QPUM4\-PDW4UQU\(dq name=\(dqbugger\(dq address=\(dq192.168.0.20:22000\(dq></remoteIgnoredDevice>
     <defaults>
-        <folder id="" label="" path="~" type="sendreceive" rescanIntervalS="3600" fsWatcherEnabled="true" fsWatcherDelayS="10" ignorePerms="false" autoNormalize="true">
+        <folder id=\(dq\(dq label=\(dq\(dq path=\(dq~\(dq type=\(dqsendreceive\(dq rescanIntervalS=\(dq3600\(dq fsWatcherEnabled=\(dqtrue\(dq fsWatcherDelayS=\(dq10\(dq ignorePerms=\(dqfalse\(dq autoNormalize=\(dqtrue\(dq>
             <filesystemType>basic</filesystemType>
-            <device id="S7UKX27\-GI7ZTXS\-GC6RKUA\-7AJGZ44\-C6NAYEB\-HSKTJQK\-KJHU2NO\-CWV7EQW" introducedBy="">
+            <device id=\(dqS7UKX27\-GI7ZTXS\-GC6RKUA\-7AJGZ44\-C6NAYEB\-HSKTJQK\-KJHU2NO\-CWV7EQW\(dq introducedBy=\(dq\(dq>
                 <encryptionPassword></encryptionPassword>
             </device>
-            <minDiskFree unit="%">1</minDiskFree>
+            <minDiskFree unit=\(dq%\(dq>1</minDiskFree>
             <versioning>
                 <cleanupIntervalS>3600</cleanupIntervalS>
                 <fsPath></fsPath>
@@ -259,7 +259,7 @@ may no longer correspond to the defaults.
             <syncXattrs>false</syncXattrs>
             <sendXattrs>false</sendXattrs>
         </folder>
-        <device id="" compression="metadata" introducer="false" skipIntroductionRemovals="false" introducedBy="">
+        <device id=\(dq\(dq compression=\(dqmetadata\(dq introducer=\(dqfalse\(dq skipIntroductionRemovals=\(dqfalse\(dq introducedBy=\(dq\(dq>
             <address>dynamic</address>
             <paused>false</paused>
             <autoAcceptFolders>false</autoAcceptFolders>
@@ -281,7 +281,7 @@ may no longer correspond to the defaults.
 .sp
 .nf
 .ft C
-<configuration version="37">
+<configuration version=\(dq37\(dq>
     <folder></folder>
     <device></device>
     <gui></gui>
@@ -318,12 +318,12 @@ GUI.
 .sp
 .nf
 .ft C
-<folder id="default" label="Default Folder" path="/Users/jb/Sync/" type="sendreceive" rescanIntervalS="3600" fsWatcherEnabled="true" fsWatcherDelayS="10" ignorePerms="false" autoNormalize="true">
+<folder id=\(dqdefault\(dq label=\(dqDefault Folder\(dq path=\(dq/Users/jb/Sync/\(dq type=\(dqsendreceive\(dq rescanIntervalS=\(dq3600\(dq fsWatcherEnabled=\(dqtrue\(dq fsWatcherDelayS=\(dq10\(dq ignorePerms=\(dqfalse\(dq autoNormalize=\(dqtrue\(dq>
     <filesystemType>basic</filesystemType>
-    <device id="S7UKX27\-GI7ZTXS\-GC6RKUA\-7AJGZ44\-C6NAYEB\-HSKTJQK\-KJHU2NO\-CWV7EQW" introducedBy="">
+    <device id=\(dqS7UKX27\-GI7ZTXS\-GC6RKUA\-7AJGZ44\-C6NAYEB\-HSKTJQK\-KJHU2NO\-CWV7EQW\(dq introducedBy=\(dq\(dq>
         <encryptionPassword></encryptionPassword>
     </device>
-    <minDiskFree unit="%">1</minDiskFree>
+    <minDiskFree unit=\(dq%\(dq>1</minDiskFree>
     <versioning>
         <cleanupIntervalS>3600</cleanupIntervalS>
         <fsPath></fsPath>
@@ -379,7 +379,7 @@ labels. (optional)
 .TP
 .B filesystemType
 The internal file system implementation used to access this folder, detailed
-in a separate chapter\&.
+in a \fI\%separate chapter\fP\&.
 .UNINDENT
 .INDENT 0.0
 .TP
@@ -410,7 +410,7 @@ changes to other devices.
 .TP
 .B \fBreceiveencrypted\fP
 Must be used on untrusted devices, where the data cannot be decrypted
-because no folder password was entered.  See untrusted\&.
+because no folder password was entered.  See \fI\%Untrusted (Encrypted) Devices\fP\&.
 .UNINDENT
 .UNINDENT
 .INDENT 0.0
@@ -443,7 +443,7 @@ as FAT, or environments where changing permissions is impossible.
 .TP
 .B autoNormalize
 Automatically correct UTF\-8 normalization errors found in file names.  The
-mechanism and how to set it up is described in a separate chapter\&.
+mechanism and how to set it up is described in a \fI\%separate chapter\fP\&.
 .UNINDENT
 .sp
 The following child elements may exist:
@@ -465,7 +465,7 @@ the configuration file.
 The \fBencryptionPassword\fP sub\-element contains the secret needed to decrypt
 this folder’s data on the remote device.  If left empty, the data is plainly
 accessible (but still protected by the transport encryption).  The mechanism
-and how to set it up is described in a separate chapter\&.
+and how to set it up is described in a \fI\%separate chapter\fP\&.
 .UNINDENT
 .INDENT 0.0
 .TP
@@ -484,7 +484,7 @@ Specifies a versioning configuration.
 \fBSEE ALSO:\fP
 .INDENT 7.0
 .INDENT 3.5
-versioning
+\fI\%File Versioning\fP
 .UNINDENT
 .UNINDENT
 .UNINDENT
@@ -545,7 +545,7 @@ Enabling this is highly discouraged \- use at your own risk. You have been warne
 .sp
 When set to \fBtrue\fP, this device will pretend not to see instructions to
 delete files from other devices.  The mechanism is described in a
-separate chapter\&.
+\fI\%separate chapter\fP\&.
 .UNINDENT
 .INDENT 0.0
 .TP
@@ -597,7 +597,7 @@ to \fB\-1\fP to always use weak hash. Default is \fB25\fP\&.
 .TP
 .B markerName
 Name of a directory or file in the folder root to be used as
-marker\-faq\&. Default is \fB\&.stfolder\fP\&.
+\fI\%How do I serve a folder from a read only filesystem?\fP\&. Default is \fB\&.stfolder\fP\&.
 .UNINDENT
 .INDENT 0.0
 .TP
@@ -633,7 +633,7 @@ This is a known insecure option \- use at your own risk.
 .sp
 Disables committing file operations to disk before recording them in the
 database.  Disabling fsync can lead to data corruption.  The mechanism is
-described in a separate chapter\&.
+described in a \fI\%separate chapter\fP\&.
 .UNINDENT
 .INDENT 0.0
 .TP
@@ -664,15 +664,15 @@ no improvements to data distribution.
 Provides a choice of method for copying data between files.  This can be
 used to optimise copies on network filesystems, improve speed of large
 copies or clone the data using copy\-on\-write functionality if the underlying
-filesystem supports it.  The mechanism is described in a separate
-chapter\&.
+filesystem supports it.  The mechanism is described in a \fI\%separate
+chapter\fP\&.
 .UNINDENT
 .INDENT 0.0
 .TP
 .B caseSensitiveFS
 Affects performance by disabling the extra safety checks for case
 insensitive filesystems.  The mechanism and how to set it up is described in
-a separate chapter\&.
+a \fI\%separate chapter\fP\&.
 .UNINDENT
 .INDENT 0.0
 .TP
@@ -684,26 +684,26 @@ to \fBtrue\fP\&.
 .TP
 .B syncOwnership
 File and directory ownership is synced when this is set to \fBtrue\fP\&. See
-/advanced/folder\-sync\-ownership for more information.
+\fI\%syncOwnership\fP for more information.
 .UNINDENT
 .INDENT 0.0
 .TP
 .B sendOwnership
 File and directory ownership information is scanned when this is set to
-\fBtrue\fP\&. See /advanced/folder\-send\-ownership for more information.
+\fBtrue\fP\&. See \fI\%sendOwnership\fP for more information.
 .UNINDENT
 .INDENT 0.0
 .TP
 .B syncXattrs
 File and directory extended attributes are synced when this is set to
-\fBtrue\fP\&. See /advanced/folder\-sync\-xattrs for more information.
+\fBtrue\fP\&. See \fI\%syncXattrs\fP for more information.
 .UNINDENT
 .INDENT 0.0
 .TP
 .B sendXattrs
 File and directory extended attributes are scanned and sent to other
 devices when this is set to \fBtrue\fP\&. See
-/advanced/folder\-send\-xattrs for more information.
+\fI\%sendXattrs\fP for more information.
 .UNINDENT
 .SH DEVICE ELEMENT
 .INDENT 0.0
@@ -711,19 +711,19 @@ devices when this is set to \fBtrue\fP\&. See
 .sp
 .nf
 .ft C
-<device id="S7UKX27\-GI7ZTXS\-GC6RKUA\-7AJGZ44\-C6NAYEB\-HSKTJQK\-KJHU2NO\-CWV7EQW" name="syno" compression="metadata" introducer="false" skipIntroductionRemovals="false" introducedBy="2CYF2WQ\-AKZO2QZ\-JAKWLYD\-AGHMQUM\-BGXUOIS\-GYILW34\-HJG3DUK\-LRRYQAR">
+<device id=\(dqS7UKX27\-GI7ZTXS\-GC6RKUA\-7AJGZ44\-C6NAYEB\-HSKTJQK\-KJHU2NO\-CWV7EQW\(dq name=\(dqsyno\(dq compression=\(dqmetadata\(dq introducer=\(dqfalse\(dq skipIntroductionRemovals=\(dqfalse\(dq introducedBy=\(dq2CYF2WQ\-AKZO2QZ\-JAKWLYD\-AGHMQUM\-BGXUOIS\-GYILW34\-HJG3DUK\-LRRYQAR\(dq>
     <address>dynamic</address>
     <paused>false</paused>
     <autoAcceptFolders>false</autoAcceptFolders>
     <maxSendKbps>0</maxSendKbps>
     <maxRecvKbps>0</maxRecvKbps>
-    <ignoredFolder time="2022\-01\-09T19:09:52Z" id="br63e\-wyhb7" label="Foo"></ignoredFolder>
+    <ignoredFolder time=\(dq2022\-01\-09T19:09:52Z\(dq id=\(dqbr63e\-wyhb7\(dq label=\(dqFoo\(dq></ignoredFolder>
     <maxRequestKiB>0</maxRequestKiB>
     <untrusted>false</untrusted>
     <remoteGUIPort>0</remoteGUIPort>
     <numConnections>0</numConnections>
 </device>
-<device id="2CYF2WQ\-AKZO2QZ\-JAKWLYD\-AGHMQUM\-BGXUOIS\-GYILW34\-HJG3DUK\-LRRYQAR" name="syno local" compression="metadata" introducer="true" skipIntroductionRemovals="false" introducedBy="">
+<device id=\(dq2CYF2WQ\-AKZO2QZ\-JAKWLYD\-AGHMQUM\-BGXUOIS\-GYILW34\-HJG3DUK\-LRRYQAR\(dq name=\(dqsyno local\(dq compression=\(dqmetadata\(dq introducer=\(dqtrue\(dq skipIntroductionRemovals=\(dqfalse\(dq introducedBy=\(dq\(dq>
     <address>tcp://192.0.2.1:22001</address>
     <paused>true</paused>
     <allowedNetwork>192.168.0.0/16</allowedNetwork>
@@ -748,7 +748,7 @@ element:
 .INDENT 0.0
 .TP
 .B id (mandatory)
-The device ID\&.
+The \fI\%device ID\fP\&.
 .UNINDENT
 .INDENT 0.0
 .TP
@@ -784,7 +784,7 @@ should copy their list of devices per folder when connecting.
 \fBSEE ALSO:\fP
 .INDENT 7.0
 .INDENT 3.5
-introducer
+\fI\%Introducer Configuration\fP
 .UNINDENT
 .UNINDENT
 .UNINDENT
@@ -851,7 +851,7 @@ for example:
 .sp
 .nf
 .ft C
-<device id="...">
+<device id=\(dq...\(dq>
     <address>tcp://192.0.2.1:22001</address>
     <address>quic://192.0.1.254:22000</address>
     <address>dynamic</address>
@@ -870,7 +870,7 @@ True if synchronization with this devices is (temporarily) suspended.
 .TP
 .B allowedNetwork
 If given, this restricts connections to this device to only this network.
-The mechanism is described in detail in a separate chapter).
+The mechanism is described in detail in a \fI\%separate chapter\fP).
 .UNINDENT
 .INDENT 0.0
 .TP
@@ -924,13 +924,13 @@ This boolean value marks a particular device as untrusted, which disallows
 ever sharing any unencrypted data with it.  Every folder shared with that
 device then needs an encryption password set, or must already be of the
 “receive encrypted” type locally.  Refer to the detailed explanation under
-untrusted\&.
+\fI\%Untrusted (Encrypted) Devices\fP\&.
 .UNINDENT
 .INDENT 0.0
 .TP
 .B numConnections
 The number of connections to this device. See
-/advanced/device\-numconnections for more information.
+\fI\%numConnections\fP for more information.
 .UNINDENT
 .SH GUI ELEMENT
 .INDENT 0.0
@@ -938,7 +938,7 @@ The number of connections to this device. See
 .sp
 .nf
 .ft C
-<gui enabled="true" tls="false" debugging="false">
+<gui enabled=\(dqtrue\(dq tls=\(dqfalse\(dq debugging=\(dqfalse\(dq>
     <address>127.0.0.1:8384</address>
     <apikey>k1dnz1Dd0rzTBjjFFh7CXPnrF12C49B1</apikey>
     <theme>default</theme>
@@ -949,7 +949,7 @@ The number of connections to this device. See
 .UNINDENT
 .sp
 There must be exactly one \fBgui\fP element. The GUI configuration is also used by
-the /dev/rest and the /dev/events\&. The following attributes may be
+the \fI\%REST API\fP and the \fI\%Event API\fP\&. The following attributes may be
 set on the \fBgui\fP element:
 .INDENT 0.0
 .TP
@@ -966,8 +966,8 @@ still possible but not required.
 .INDENT 0.0
 .TP
 .B debugging
-This enables /users/profiling and additional endpoints in the REST
-API, see /rest/debug\&.
+This enables \fI\%Profiling\fP and additional endpoints in the REST
+API, see \fI\%Debug Endpoints\fP\&.
 .UNINDENT
 .sp
 The following child elements may be present:
@@ -1069,7 +1069,7 @@ LDAP authentication. Requires ldap top level config section to be present.
 .UNINDENT
 .sp
 The \fBldap\fP element contains LDAP configuration options.  The mechanism is
-described in detail under ldap\&.
+described in detail under \fI\%LDAP Authentication\fP\&.
 .INDENT 0.0
 .TP
 .B address (mandatory)
@@ -1154,7 +1154,7 @@ Search filter for user searches.
     <cacheIgnoredFiles>false</cacheIgnoredFiles>
     <progressUpdateIntervalS>5</progressUpdateIntervalS>
     <limitBandwidthInLan>false</limitBandwidthInLan>
-    <minHomeDiskFree unit="%">1</minHomeDiskFree>
+    <minHomeDiskFree unit=\(dq%\(dq>1</minHomeDiskFree>
     <releasesURL>https://upgrades.syncthing.net/meta.json</releasesURL>
     <overwriteRemoteDeviceNamesOnConnect>false</overwriteRemoteDeviceNamesOnConnect>
     <tempIndexMinBlocks>10</tempIndexMinBlocks>
@@ -1318,7 +1318,7 @@ automatic upgrades.
 .TP
 .B upgradeToPreReleases
 If \fBtrue\fP, automatic upgrades include release candidates (see
-releases).
+\fI\%Versions & Releases\fP).
 .UNINDENT
 .INDENT 0.0
 .TP
@@ -1432,18 +1432,18 @@ as part of launching Syncthing, set this option to \fBfalse\fP\&.
 .B maxFolderConcurrency
 This option controls how many folders may concurrently be in I/O\-intensive
 operations such as syncing or scanning.  The mechanism is described in
-detail in a separate chapter\&.
+detail in a \fI\%separate chapter\fP\&.
 .UNINDENT
 .INDENT 0.0
 .TP
 .B crashReportingURL
-Server URL where automatic crash reports will be sent if
+Server URL where \fI\%automatic crash reports\fP will be sent if
 enabled.
 .UNINDENT
 .INDENT 0.0
 .TP
 .B crashReportingEnabled
-Switch to opt out from the automatic crash reporting
+Switch to opt out from the \fI\%automatic crash reporting\fP
 feature. Set \fBfalse\fP to keep Syncthing from sending panic logs on serious
 troubles.  Defaults to \fBtrue\fP, to help the developers troubleshoot.
 .UNINDENT
@@ -1452,7 +1452,7 @@ troubles.  Defaults to \fBtrue\fP, to help the developers troubleshoot.
 .B databaseTuning
 Controls how Syncthing uses the backend key\-value database that stores the
 index data and other persistent data it needs.  The available options and
-implications are explained in a separate chapter\&.
+implications are explained in a \fI\%separate chapter\fP\&.
 .UNINDENT
 .INDENT 0.0
 .TP
@@ -1470,7 +1470,7 @@ addresses to global discovery.
 .TP
 .B sendFullIndexOnUpgrade
 Controls whether all index data is resent when an upgrade has happened,
-equivalent to starting Syncthing with \fB\-\-reset\-deltas\fP\&.  This used
+equivalent to starting Syncthing with \fI\%\-\-reset\-deltas\fP\&.  This used
 to be the default behavior in older versions, but is mainly useful as a
 troubleshooting step and causes high database churn. The default is now
 \fBfalse\fP\&.
@@ -1488,21 +1488,21 @@ so that regular users do not enable it by accident.
 .B connectionLimitEnough
 The number of connections at which we stop trying to connect to more
 devices, zero meaning no limit.  Does not affect incoming connections.  The
-mechanism is described in detail in a separate chapter\&.
+mechanism is described in detail in a \fI\%separate chapter\fP\&.
 .UNINDENT
 .INDENT 0.0
 .TP
 .B connectionLimitMax
 The maximum number of connections which we will allow in total, zero meaning
 no limit.  Affects incoming connections and prevents attempting outgoing
-connections.  The mechanism is described in detail in a separate
-chapter\&.
+connections.  The mechanism is described in detail in a \fI\%separate
+chapter\fP\&.
 .UNINDENT
 .INDENT 0.0
 .TP
 .B insecureAllowOldTLSVersions
 Only for compatibility with old versions of Syncthing on remote devices, as
-detailed in /advanced/option\-insecure\-allow\-old\-tls\-versions\&.
+detailed in \fI\%insecureAllowOldTLSVersions\fP\&.
 .UNINDENT
 .SH DEFAULTS ELEMENT
 .INDENT 0.0
@@ -1511,12 +1511,12 @@ detailed in /advanced/option\-insecure\-allow\-old\-tls\-versions\&.
 .nf
 .ft C
 <defaults>
-    <folder id="" label="" path="~" type="sendreceive" rescanIntervalS="3600" fsWatcherEnabled="true" fsWatcherDelayS="10" ignorePerms="false" autoNormalize="true">
+    <folder id=\(dq\(dq label=\(dq\(dq path=\(dq~\(dq type=\(dqsendreceive\(dq rescanIntervalS=\(dq3600\(dq fsWatcherEnabled=\(dqtrue\(dq fsWatcherDelayS=\(dq10\(dq ignorePerms=\(dqfalse\(dq autoNormalize=\(dqtrue\(dq>
         <filesystemType>basic</filesystemType>
-        <device id="S7UKX27\-GI7ZTXS\-GC6RKUA\-7AJGZ44\-C6NAYEB\-HSKTJQK\-KJHU2NO\-CWV7EQW" introducedBy="">
+        <device id=\(dqS7UKX27\-GI7ZTXS\-GC6RKUA\-7AJGZ44\-C6NAYEB\-HSKTJQK\-KJHU2NO\-CWV7EQW\(dq introducedBy=\(dq\(dq>
             <encryptionPassword></encryptionPassword>
         </device>
-        <minDiskFree unit="%">1</minDiskFree>
+        <minDiskFree unit=\(dq%\(dq>1</minDiskFree>
         <versioning>
             <cleanupIntervalS>3600</cleanupIntervalS>
             <fsPath></fsPath>
@@ -1544,7 +1544,7 @@ detailed in /advanced/option\-insecure\-allow\-old\-tls\-versions\&.
         <caseSensitiveFS>false</caseSensitiveFS>
         <junctionsAsDirs>false</junctionsAsDirs>
     </folder>
-    <device id="" compression="metadata" introducer="false" skipIntroductionRemovals="false" introducedBy="">
+    <device id=\(dq\(dq compression=\(dqmetadata\(dq introducer=\(dqfalse\(dq skipIntroductionRemovals=\(dqfalse\(dq introducedBy=\(dq\(dq>
         <address>dynamic</address>
         <paused>false</paused>
         <autoAcceptFolders>false</autoAcceptFolders>
@@ -1599,7 +1599,7 @@ including the appropriate \fI\%folder.device\fP element underneath.
 New in version 1.19.0.
 
 .sp
-Template for the ignore patterns applied to new
+Template for the \fI\%ignore patterns\fP applied to new
 folders.  These are copied to the \fB\&.stignore\fP file when a folder is
 automatically accepted from a remote device.  The GUI uses them to pre\-fill
 the respective field when adding a new folder as well.  In XML, each pattern
@@ -1671,12 +1671,12 @@ accidentally if you sync your home folder between devices. A common symptom
 of syncing configuration files is two devices ending up with the same Device ID.
 .sp
 If you want to use Syncthing to backup your configuration files, it is recommended
-that the files you are backing up are in a folder\-sendonly to prevent other
+that the files you are backing up are in a \fI\%Send Only Folder\fP to prevent other
 devices from overwriting the per device configuration. The folder on the remote
 device(s) should not be used as configuration for the remote devices.
 .sp
 If you’d like to sync your home folder in non\-send only mode, you may add the
-folder that stores the configuration files to the ignore list\&.
+folder that stores the configuration files to the \fI\%ignore list\fP\&.
 If you’d also like to backup your configuration files, add another folder in
 send only mode for just the configuration folder.
 .SH AUTHOR
diff --git a/man/syncthing-device-ids.7 b/man/syncthing-device-ids.7
index 2080435d7..920df1c8b 100644
--- a/man/syncthing-device-ids.7
+++ b/man/syncthing-device-ids.7
@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-DEVICE-IDS" "7" "Sep 07, 2023" "v1.24.0" "Syncthing"
+.TH "SYNCTHING-DEVICE-IDS" "7" "Sep 17, 2023" "v1.24.0" "Syncthing"
 .SH NAME
 syncthing-device-ids \- Understanding Device IDs
 .sp
diff --git a/man/syncthing-event-api.7 b/man/syncthing-event-api.7
index cdb891fdb..d268ba358 100644
--- a/man/syncthing-event-api.7
+++ b/man/syncthing-event-api.7
@@ -27,13 +27,13 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-EVENT-API" "7" "Sep 07, 2023" "v1.24.0" "Syncthing"
+.TH "SYNCTHING-EVENT-API" "7" "Sep 17, 2023" "v1.24.0" "Syncthing"
 .SH NAME
 syncthing-event-api \- Event API
 .SH DESCRIPTION
 .sp
 Syncthing provides a simple long polling interface for exposing events from the
-core utility towards a GUI. To receive events, see /rest/events\-get\&.
+core utility towards a GUI. To receive events, see \fI\%GET /rest/events\fP\&.
 .SH EVENT STRUCTURE
 .sp
 Each event is represented by an object similar to the following:
@@ -43,13 +43,13 @@ Each event is represented by an object similar to the following:
 .nf
 .ft C
 {
-    "id": 2,
-    "globalID": 3,
-    "type": "DeviceConnected",
-    "time": "2014\-07\-13T21:04:33.687836696+02:00",
-    "data": {
-        "addr": "172.16.32.25:22000",
-        "id": "NFGKEKE\-7Z6RTH7\-I3PRZXS\-DEJF3UJ\-FRWJBFO\-VBBTDND\-4SGNGVZ\-QUQHJAG"
+    \(dqid\(dq: 2,
+    \(dqglobalID\(dq: 3,
+    \(dqtype\(dq: \(dqDeviceConnected\(dq,
+    \(dqtime\(dq: \(dq2014\-07\-13T21:04:33.687836696+02:00\(dq,
+    \(dqdata\(dq: {
+        \(dqaddr\(dq: \(dq172.16.32.25:22000\(dq,
+        \(dqid\(dq: \(dqNFGKEKE\-7Z6RTH7\-I3PRZXS\-DEJF3UJ\-FRWJBFO\-VBBTDND\-4SGNGVZ\-QUQHJAG\(dq
     }
 }
 .ft P
@@ -96,12 +96,12 @@ message received from a remote device.  It is mainly used for internal purposes.
 .nf
 .ft C
 {
-    "id": 84,
-    "globalID": 84,
-    "type": "ClusterConfigReceived",
-    "time": "2022\-04\-27T14:14:27.043576583+09:00",
-    "data": {
-        "device": "I6KAH76\-66SLLLB\-5PFXSOA\-UFJCDZC\-YAOMLEK\-CP2GB32\-BV5RQST\-3PSROAU"
+    \(dqid\(dq: 84,
+    \(dqglobalID\(dq: 84,
+    \(dqtype\(dq: \(dqClusterConfigReceived\(dq,
+    \(dqtime\(dq: \(dq2022\-04\-27T14:14:27.043576583+09:00\(dq,
+    \(dqdata\(dq: {
+        \(dqdevice\(dq: \(dqI6KAH76\-66SLLLB\-5PFXSOA\-UFJCDZC\-YAOMLEK\-CP2GB32\-BV5RQST\-3PSROAU\(dq
     }
 }
 .ft P
@@ -118,19 +118,19 @@ itself.
 .nf
 .ft C
 {
-    "id": 50,
-    "globalID": 50,
-    "type": "ConfigSaved",
-    "time": "2014\-12\-13T00:09:13.5166486Z",
-    "data": {
-        "version": 7,
-        "folders": [{"..."}],
-        "devices": [{"..."}],
-        "gui": {"..."},
-        "ldap": {"..."},
-        "options": {"..."},
-        "remoteIgnoredDevices": [{"..."}],
-        "defaults": {"..."}
+    \(dqid\(dq: 50,
+    \(dqglobalID\(dq: 50,
+    \(dqtype\(dq: \(dqConfigSaved\(dq,
+    \(dqtime\(dq: \(dq2014\-12\-13T00:09:13.5166486Z\(dq,
+    \(dqdata\(dq: {
+        \(dqversion\(dq: 7,
+        \(dqfolders\(dq: [{\(dq...\(dq}],
+        \(dqdevices\(dq: [{\(dq...\(dq}],
+        \(dqgui\(dq: {\(dq...\(dq},
+        \(dqldap\(dq: {\(dq...\(dq},
+        \(dqoptions\(dq: {\(dq...\(dq},
+        \(dqremoteIgnoredDevices\(dq: [{\(dq...\(dq}],
+        \(dqdefaults\(dq: {\(dq...\(dq}
     }
 }
 .ft P
@@ -146,17 +146,17 @@ Generated each time a connection to a device has been established.
 .nf
 .ft C
 {
-    "id": 2,
-    "globalID": 2,
-    "type": "DeviceConnected",
-    "time": "2014\-07\-13T21:04:33.687836696+02:00",
-    "data": {
-        "addr": "172.16.32.25:22000",
-        "id": "NFGKEKE\-7Z6RTH7\-I3PRZXS\-DEJF3UJ\-FRWJBFO\-VBBTDND\-4SGNGVZ\-QUQHJAG",
-        "deviceName": "Laptop",
-        "clientName": "syncthing",
-        "clientVersion": "v0.13.4",
-        "type": "TCP (Client)"
+    \(dqid\(dq: 2,
+    \(dqglobalID\(dq: 2,
+    \(dqtype\(dq: \(dqDeviceConnected\(dq,
+    \(dqtime\(dq: \(dq2014\-07\-13T21:04:33.687836696+02:00\(dq,
+    \(dqdata\(dq: {
+        \(dqaddr\(dq: \(dq172.16.32.25:22000\(dq,
+        \(dqid\(dq: \(dqNFGKEKE\-7Z6RTH7\-I3PRZXS\-DEJF3UJ\-FRWJBFO\-VBBTDND\-4SGNGVZ\-QUQHJAG\(dq,
+        \(dqdeviceName\(dq: \(dqLaptop\(dq,
+        \(dqclientName\(dq: \(dqsyncthing\(dq,
+        \(dqclientVersion\(dq: \(dqv0.13.4\(dq,
+        \(dqtype\(dq: \(dqTCP (Client)\(dq
     }
 }
 .ft P
@@ -172,13 +172,13 @@ Generated each time a connection to a device has been terminated.
 .nf
 .ft C
 {
-    "id": 48,
-    "globalID": 48,
-    "type": "DeviceDisconnected",
-    "time": "2014\-07\-13T21:18:52.859929215+02:00",
-    "data": {
-        "error": "unexpected EOF",
-        "id": "NFGKEKE\-7Z6RTH7\-I3PRZXS\-DEJF3UJ\-FRWJBFO\-VBBTDND\-4SGNGVZ\-QUQHJAG"
+    \(dqid\(dq: 48,
+    \(dqglobalID\(dq: 48,
+    \(dqtype\(dq: \(dqDeviceDisconnected\(dq,
+    \(dqtime\(dq: \(dq2014\-07\-13T21:18:52.859929215+02:00\(dq,
+    \(dqdata\(dq: {
+        \(dqerror\(dq: \(dqunexpected EOF\(dq,
+        \(dqid\(dq: \(dqNFGKEKE\-7Z6RTH7\-I3PRZXS\-DEJF3UJ\-FRWJBFO\-VBBTDND\-4SGNGVZ\-QUQHJAG\(dq
     }
 }
 .ft P
@@ -204,15 +204,15 @@ Emitted when a new device is discovered using local discovery.
 .nf
 .ft C
 {
-    "id": 13,
-    "globalID": 13,
-    "type": "DeviceDiscovered",
-    "time": "2014\-07\-17T13:28:05.043465207+02:00",
-    "data": {
-        "addrs": [
-            "172.16.32.25:22000"
+    \(dqid\(dq: 13,
+    \(dqglobalID\(dq: 13,
+    \(dqtype\(dq: \(dqDeviceDiscovered\(dq,
+    \(dqtime\(dq: \(dq2014\-07\-17T13:28:05.043465207+02:00\(dq,
+    \(dqdata\(dq: {
+        \(dqaddrs\(dq: [
+            \(dq172.16.32.25:22000\(dq
         ],
-        "device": "NFGKEKE\-7Z6RTH7\-I3PRZXS\-DEJF3UJ\-FRWJBFO\-VBBTDND\-4SGNGVZ\-QUQHJAG"
+        \(dqdevice\(dq: \(dqNFGKEKE\-7Z6RTH7\-I3PRZXS\-DEJF3UJ\-FRWJBFO\-VBBTDND\-4SGNGVZ\-QUQHJAG\(dq
     }
 }
 .ft P
@@ -228,12 +228,12 @@ Emitted when a device was paused.
 .nf
 .ft C
 {
-    "id": 13,
-    "globalID": 13,
-    "type": "DevicePaused",
-    "time": "2014\-07\-17T13:28:05.043465207+02:00",
-    "data": {
-        "device": "NFGKEKE\-7Z6RTH7\-I3PRZXS\-DEJF3UJ\-FRWJBFO\-VBBTDND\-4SGNGVZ\-QUQHJAG"
+    \(dqid\(dq: 13,
+    \(dqglobalID\(dq: 13,
+    \(dqtype\(dq: \(dqDevicePaused\(dq,
+    \(dqtime\(dq: \(dq2014\-07\-17T13:28:05.043465207+02:00\(dq,
+    \(dqdata\(dq: {
+        \(dqdevice\(dq: \(dqNFGKEKE\-7Z6RTH7\-I3PRZXS\-DEJF3UJ\-FRWJBFO\-VBBTDND\-4SGNGVZ\-QUQHJAG\(dq
     }
 }
 .ft P
@@ -243,7 +243,7 @@ Emitted when a device was paused.
 .SS DeviceRejected (DEPRECATED)
 .sp
 Deprecated since version v1.13.0: This event is still emitted for compatibility, but deprecated.  Use
-the replacement pendingdeviceschanged event instead.
+the replacement \fI\%PendingDevicesChanged\fP event instead.
 
 .sp
 Emitted when there is a connection from a device we are not configured
@@ -254,14 +254,14 @@ to talk to.
 .nf
 .ft C
 {
-    "id": 24,
-    "globalID": 24,
-    "type": "DeviceRejected",
-    "time": "2014\-08\-19T10:43:00.562821045+02:00",
-    "data": {
-        "address": "127.0.0.1:51807",
-        "name": "My dusty computer",
-        "device": "EJHMPAQ\-OGCVORE\-ISB4IS3\-SYYVJXF\-TKJGLTU\-66DIQPF\-GJ5D2GX\-GQ3OWQK"
+    \(dqid\(dq: 24,
+    \(dqglobalID\(dq: 24,
+    \(dqtype\(dq: \(dqDeviceRejected\(dq,
+    \(dqtime\(dq: \(dq2014\-08\-19T10:43:00.562821045+02:00\(dq,
+    \(dqdata\(dq: {
+        \(dqaddress\(dq: \(dq127.0.0.1:51807\(dq,
+        \(dqname\(dq: \(dqMy dusty computer\(dq,
+        \(dqdevice\(dq: \(dqEJHMPAQ\-OGCVORE\-ISB4IS3\-SYYVJXF\-TKJGLTU\-66DIQPF\-GJ5D2GX\-GQ3OWQK\(dq
     }
 }
 .ft P
@@ -277,12 +277,12 @@ Generated each time a device was resumed.
 .nf
 .ft C
 {
-    "id": 2,
-    "globalID": 2,
-    "type": "DeviceResumed",
-    "time": "2014\-07\-13T21:04:33.687836696+02:00",
-    "data": {
-        "device": "NFGKEKE\-7Z6RTH7\-I3PRZXS\-DEJF3UJ\-FRWJBFO\-VBBTDND\-4SGNGVZ\-QUQHJAG"
+    \(dqid\(dq: 2,
+    \(dqglobalID\(dq: 2,
+    \(dqtype\(dq: \(dqDeviceResumed\(dq,
+    \(dqtime\(dq: \(dq2014\-07\-13T21:04:33.687836696+02:00\(dq,
+    \(dqdata\(dq: {
+        \(dqdevice\(dq: \(dqNFGKEKE\-7Z6RTH7\-I3PRZXS\-DEJF3UJ\-FRWJBFO\-VBBTDND\-4SGNGVZ\-QUQHJAG\(dq
     }
 }
 .ft P
@@ -300,53 +300,53 @@ configuration can cause multiple files to be shown.
 .nf
 .ft C
 {
-    "id": 221,
-    "globalID": 221,
-    "type": "DownloadProgress",
-    "time": "2014\-12\-13T00:26:12.9876937Z",
-    "data": {
-        "folder1": {
-            "file1": {
-                "total": 800,
-                "pulling": 2,
-                "copiedFromOrigin": 0,
-                "reused": 633,
-                "copiedFromElsewhere": 0,
-                "pulled": 38,
-                "bytesTotal": 104792064,
-                "bytesDone": 87883776
+    \(dqid\(dq: 221,
+    \(dqglobalID\(dq: 221,
+    \(dqtype\(dq: \(dqDownloadProgress\(dq,
+    \(dqtime\(dq: \(dq2014\-12\-13T00:26:12.9876937Z\(dq,
+    \(dqdata\(dq: {
+        \(dqfolder1\(dq: {
+            \(dqfile1\(dq: {
+                \(dqtotal\(dq: 800,
+                \(dqpulling\(dq: 2,
+                \(dqcopiedFromOrigin\(dq: 0,
+                \(dqreused\(dq: 633,
+                \(dqcopiedFromElsewhere\(dq: 0,
+                \(dqpulled\(dq: 38,
+                \(dqbytesTotal\(dq: 104792064,
+                \(dqbytesDone\(dq: 87883776
             },
-            "dir\e\efile2": {
-                "total": 80,
-                "pulling": 2,
-                "copiedFromOrigin": 0,
-                "reused": 0,
-                "copiedFromElsewhere": 0,
-                "pulled": 32,
-                "bytesTotal": 10420224,
-                "bytesDone": 4128768
+            \(dqdir\e\efile2\(dq: {
+                \(dqtotal\(dq: 80,
+                \(dqpulling\(dq: 2,
+                \(dqcopiedFromOrigin\(dq: 0,
+                \(dqreused\(dq: 0,
+                \(dqcopiedFromElsewhere\(dq: 0,
+                \(dqpulled\(dq: 32,
+                \(dqbytesTotal\(dq: 10420224,
+                \(dqbytesDone\(dq: 4128768
             }
         },
-        "folder2": {
-            "file3": {
-                "total": 800,
-                "pulling": 2,
-                "copiedFromOrigin": 0,
-                "reused": 633,
-                "copiedFromElsewhere": 0,
-                "pulled": 38,
-                "bytesTotal": 104792064,
-                "bytesDone": 87883776
+        \(dqfolder2\(dq: {
+            \(dqfile3\(dq: {
+                \(dqtotal\(dq: 800,
+                \(dqpulling\(dq: 2,
+                \(dqcopiedFromOrigin\(dq: 0,
+                \(dqreused\(dq: 633,
+                \(dqcopiedFromElsewhere\(dq: 0,
+                \(dqpulled\(dq: 38,
+                \(dqbytesTotal\(dq: 104792064,
+                \(dqbytesDone\(dq: 87883776
             },
-            "dir\e\efile4": {
-                "total": 80,
-                "pulling": 2,
-                "copiedFromOrigin": 0,
-                "reused": 0,
-                "copiedFromElsewhere": 0,
-                "pulled": 32,
-                "bytesTotal": 10420224,
-                "bytesDone": 4128768
+            \(dqdir\e\efile4\(dq: {
+                \(dqtotal\(dq: 80,
+                \(dqpulling\(dq: 2,
+                \(dqcopiedFromOrigin\(dq: 0,
+                \(dqreused\(dq: 0,
+                \(dqcopiedFromElsewhere\(dq: 0,
+                \(dqpulled\(dq: 32,
+                \(dqbytesTotal\(dq: 10420224,
+                \(dqbytesDone\(dq: 4128768
             }
         }
     }
@@ -396,11 +396,11 @@ The \fBdata\fP field contains a textual error message.
 .nf
 .ft C
 {
-  "id": 93,
-  "globalID": 93,
-  "type": "Failure",
-  "time": "2021\-06\-07T21:22:03.414609034+02:00",
-  "data": "index handler got paused while already paused"
+  \(dqid\(dq: 93,
+  \(dqglobalID\(dq: 93,
+  \(dqtype\(dq: \(dqFailure\(dq,
+  \(dqtime\(dq: \(dq2021\-06\-07T21:22:03.414609034+02:00\(dq,
+  \(dqdata\(dq: \(dqindex handler got paused while already paused\(dq
 }
 .ft P
 .fi
@@ -424,21 +424,21 @@ either \fBpaused\fP, \fBnotSharing\fP, or \fBvalid\fP if the remote is sharing b
 .nf
 .ft C
 {
-    "id": 84,
-    "globalID": 84,
-    "type": "FolderCompletion",
-    "time": "2022\-04\-27T14:14:27.043576583+09:00",
-    "data": {
-        "completion": 100,
-        "device": "I6KAH76\-66SLLLB\-5PFXSOA\-UFJCDZC\-YAOMLEK\-CP2GB32\-BV5RQST\-3PSROAU",
-        "folder": "default",
-        "globalBytes": 17,
-        "globalItems": 4,
-        "needBytes": 0,
-        "needDeletes": 0,
-        "needItems": 0,
-        "remoteState": "valid",
-        "sequence": 12
+    \(dqid\(dq: 84,
+    \(dqglobalID\(dq: 84,
+    \(dqtype\(dq: \(dqFolderCompletion\(dq,
+    \(dqtime\(dq: \(dq2022\-04\-27T14:14:27.043576583+09:00\(dq,
+    \(dqdata\(dq: {
+        \(dqcompletion\(dq: 100,
+        \(dqdevice\(dq: \(dqI6KAH76\-66SLLLB\-5PFXSOA\-UFJCDZC\-YAOMLEK\-CP2GB32\-BV5RQST\-3PSROAU\(dq,
+        \(dqfolder\(dq: \(dqdefault\(dq,
+        \(dqglobalBytes\(dq: 17,
+        \(dqglobalItems\(dq: 4,
+        \(dqneedBytes\(dq: 0,
+        \(dqneedDeletes\(dq: 0,
+        \(dqneedItems\(dq: 0,
+        \(dqremoteState\(dq: \(dqvalid\(dq,
+        \(dqsequence\(dq: 12
     }
 }
 .ft P
@@ -458,17 +458,17 @@ synchronization attempt, a new \fBFolderErrors\fP event is emitted.
 .nf
 .ft C
 {
-    "id": 132,
-    "type": "FolderErrors",
-    "time": "2015\-06\-26T13:39:24.697401384+02:00",
-    "data": {
-        "errors": [
+    \(dqid\(dq: 132,
+    \(dqtype\(dq: \(dqFolderErrors\(dq,
+    \(dqtime\(dq: \(dq2015\-06\-26T13:39:24.697401384+02:00\(dq,
+    \(dqdata\(dq: {
+        \(dqerrors\(dq: [
             {
-                "error": "open /Users/jb/src/github.com/syncthing/syncthing/test/s2/h2j/.syncthing.aslkjd.tmp: permission denied",
-                "path": "h2j/aslkjd"
+                \(dqerror\(dq: \(dqopen /Users/jb/src/github.com/syncthing/syncthing/test/s2/h2j/.syncthing.aslkjd.tmp: permission denied\(dq,
+                \(dqpath\(dq: \(dqh2j/aslkjd\(dq
             }
         ],
-        "folder": "default"
+        \(dqfolder\(dq: \(dqdefault\(dq
     }
 }
 .ft P
@@ -482,7 +482,7 @@ New in version 0.11.12.
 \fBSEE ALSO:\fP
 .INDENT 0.0
 .INDENT 3.5
-The statechanged event.
+The \fI\%StateChanged\fP event.
 .UNINDENT
 .UNINDENT
 .SS FolderPaused
@@ -495,13 +495,13 @@ of a folder.  Sent repeatedly for each changed folder.
 .nf
 .ft C
 {
-  "id": 93,
-  "globalID": 93,
-  "type": "FolderPaused",
-  "time": "2021\-06\-07T23:45:03.414609034+02:00",
-  "data": {
-    "id": "abcde\-fghij",
-    "label": "My folder"
+  \(dqid\(dq: 93,
+  \(dqglobalID\(dq: 93,
+  \(dqtype\(dq: \(dqFolderPaused\(dq,
+  \(dqtime\(dq: \(dq2021\-06\-07T23:45:03.414609034+02:00\(dq,
+  \(dqdata\(dq: {
+    \(dqid\(dq: \(dqabcde\-fghij\(dq,
+    \(dqlabel\(dq: \(dqMy folder\(dq
   }
 }
 .ft P
@@ -511,7 +511,7 @@ of a folder.  Sent repeatedly for each changed folder.
 .SS FolderRejected (DEPRECATED)
 .sp
 Deprecated since version v1.13.0: This event is still emitted for compatibility, but deprecated.  Use
-the replacement pendingfolderschanged event instead.
+the replacement \fI\%PendingFoldersChanged\fP event instead.
 
 .sp
 Emitted when a device sends index information for a folder we do not
@@ -522,14 +522,14 @@ have, or have but do not share with the device in question.
 .nf
 .ft C
 {
-    "id": 27,
-    "globalID": 27,
-    "type": "FolderRejected",
-    "time": "2014\-08\-19T10:41:06.761751399+02:00",
-    "data": {
-        "device": "EJHMPAQ\-OGCVORE\-ISB4IS3\-SYYVJXF\-TKJGLTU\-66DIQPF\-GJ5D2GX\-GQ3OWQK",
-        "folder": "GXWxf\-3zgnU",
-        "folderLabel": "My Pictures"
+    \(dqid\(dq: 27,
+    \(dqglobalID\(dq: 27,
+    \(dqtype\(dq: \(dqFolderRejected\(dq,
+    \(dqtime\(dq: \(dq2014\-08\-19T10:41:06.761751399+02:00\(dq,
+    \(dqdata\(dq: {
+        \(dqdevice\(dq: \(dqEJHMPAQ\-OGCVORE\-ISB4IS3\-SYYVJXF\-TKJGLTU\-66DIQPF\-GJ5D2GX\-GQ3OWQK\(dq,
+        \(dqfolder\(dq: \(dqGXWxf\-3zgnU\(dq,
+        \(dqfolderLabel\(dq: \(dqMy Pictures\(dq
     }
 }
 .ft P
@@ -546,13 +546,13 @@ of a folder.  Sent repeatedly for each changed folder.
 .nf
 .ft C
 {
-  "id": 93,
-  "globalID": 93,
-  "type": "FolderResumed",
-  "time": "2021\-06\-07T23:45:03.414609034+02:00",
-  "data": {
-    "id": "abcde\-fghij",
-    "label": "My folder"
+  \(dqid\(dq: 93,
+  \(dqglobalID\(dq: 93,
+  \(dqtype\(dq: \(dqFolderResumed\(dq,
+  \(dqtime\(dq: \(dq2021\-06\-07T23:45:03.414609034+02:00\(dq,
+  \(dqdata\(dq: {
+    \(dqid\(dq: \(dqabcde\-fghij\(dq,
+    \(dqlabel\(dq: \(dqMy folder\(dq
   }
 }
 .ft P
@@ -570,16 +570,16 @@ total , as well as the current scanning rates in bytes per second.
 .nf
 .ft C
 {
-   "data" : {
-      "total" : 1,
-      "rate" : 0,
-      "current" : 0,
-      "folder" : "bd7q3\-zskm5"
+   \(dqdata\(dq : {
+      \(dqtotal\(dq : 1,
+      \(dqrate\(dq : 0,
+      \(dqcurrent\(dq : 0,
+      \(dqfolder\(dq : \(dqbd7q3\-zskm5\(dq
    },
-   "globalID" : 29,
-   "type" : "FolderScanProgress",
-   "time" : "2017\-03\-06T15:00:58.072004209+01:00",
-   "id" : 29
+   \(dqglobalID\(dq : 29,
+   \(dqtype\(dq : \(dqFolderScanProgress\(dq,
+   \(dqtime\(dq : \(dq2017\-03\-06T15:00:58.072004209+01:00\(dq,
+   \(dqid\(dq : 29
 }
 .ft P
 .fi
@@ -596,28 +596,28 @@ state.
 .nf
 .ft C
 {
-    "id": 16,
-    "globalID": 16,
-    "type": "FolderSummary",
-    "time": "2015\-04\-17T14:12:20.460121585+09:00",
-    "data": {
-        "folder": "default",
-        "summary": {
-            "globalBytes": 0,
-            "globalDeleted": 0,
-            "globalFiles": 0,
-            "ignorePatterns": false,
-            "inSyncBytes": 0,
-            "inSyncFiles": 0,
-            "invalid": "",
-            "localBytes": 0,
-            "localDeleted": 0,
-            "localFiles": 0,
-            "needBytes": 0,
-            "needFiles": 0,
-            "state": "idle",
-            "stateChanged": "2015\-04\-17T14:12:12.455224687+09:00",
-            "version": 0
+    \(dqid\(dq: 16,
+    \(dqglobalID\(dq: 16,
+    \(dqtype\(dq: \(dqFolderSummary\(dq,
+    \(dqtime\(dq: \(dq2015\-04\-17T14:12:20.460121585+09:00\(dq,
+    \(dqdata\(dq: {
+        \(dqfolder\(dq: \(dqdefault\(dq,
+        \(dqsummary\(dq: {
+            \(dqglobalBytes\(dq: 0,
+            \(dqglobalDeleted\(dq: 0,
+            \(dqglobalFiles\(dq: 0,
+            \(dqignorePatterns\(dq: false,
+            \(dqinSyncBytes\(dq: 0,
+            \(dqinSyncFiles\(dq: 0,
+            \(dqinvalid\(dq: \(dq\(dq,
+            \(dqlocalBytes\(dq: 0,
+            \(dqlocalDeleted\(dq: 0,
+            \(dqlocalFiles\(dq: 0,
+            \(dqneedBytes\(dq: 0,
+            \(dqneedFiles\(dq: 0,
+            \(dqstate\(dq: \(dqidle\(dq,
+            \(dqstateChanged\(dq: \(dq2015\-04\-17T14:12:12.455224687+09:00\(dq,
+            \(dqversion\(dq: 0
         }
     }
 }
@@ -638,13 +638,13 @@ If there was no error in either of these, the respective field is omitted.
 .nf
 .ft C
 {
-  "id": 123,
-  "type": "FolderWatchStateChanged",
-  "time": "2022\-03\-14T12:34:56.890000000+01:00",
-  "data": {
-    "folder": "default",
-    "from": "Something bad happened.",
-    "to": "Something worse happened."
+  \(dqid\(dq: 123,
+  \(dqtype\(dq: \(dqFolderWatchStateChanged\(dq,
+  \(dqtime\(dq: \(dq2022\-03\-14T12:34:56.890000000+01:00\(dq,
+  \(dqdata\(dq: {
+    \(dqfolder\(dq: \(dqdefault\(dq,
+    \(dqfrom\(dq: \(dqSomething bad happened.\(dq,
+    \(dqto\(dq: \(dqSomething worse happened.\(dq
   }
 }
 .ft P
@@ -661,16 +661,16 @@ successful operation:
 .nf
 .ft C
 {
-    "id": 93,
-    "globalID": 93,
-    "type": "ItemFinished",
-    "time": "2014\-07\-13T21:22:03.414609034+02:00",
-    "data": {
-        "item": "test.txt",
-        "folder": "default",
-        "error": null,
-        "type": "file",
-        "action": "update"
+    \(dqid\(dq: 93,
+    \(dqglobalID\(dq: 93,
+    \(dqtype\(dq: \(dqItemFinished\(dq,
+    \(dqtime\(dq: \(dq2014\-07\-13T21:22:03.414609034+02:00\(dq,
+    \(dqdata\(dq: {
+        \(dqitem\(dq: \(dqtest.txt\(dq,
+        \(dqfolder\(dq: \(dqdefault\(dq,
+        \(dqerror\(dq: null,
+        \(dqtype\(dq: \(dqfile\(dq,
+        \(dqaction\(dq: \(dqupdate\(dq
     }
 }
 .ft P
@@ -685,16 +685,16 @@ An unsuccessful operation:
 .nf
 .ft C
 {
-    "id": 44,
-    "globalID": 44,
-    "type": "ItemFinished",
-    "time": "2015\-05\-27T11:21:05.711133004+02:00",
-    "data": {
-        "action": "update",
-        "error": "open /Users/jb/src/github.com/syncthing/syncthing/test/s2/foo/.syncthing.hej.tmp: permission denied",
-        "folder": "default",
-        "item": "foo/hej",
-        "type": "file"
+    \(dqid\(dq: 44,
+    \(dqglobalID\(dq: 44,
+    \(dqtype\(dq: \(dqItemFinished\(dq,
+    \(dqtime\(dq: \(dq2015\-05\-27T11:21:05.711133004+02:00\(dq,
+    \(dqdata\(dq: {
+        \(dqaction\(dq: \(dqupdate\(dq,
+        \(dqerror\(dq: \(dqopen /Users/jb/src/github.com/syncthing/syncthing/test/s2/foo/.syncthing.hej.tmp: permission denied\(dq,
+        \(dqfolder\(dq: \(dqdefault\(dq,
+        \(dqitem\(dq: \(dqfoo/hej\(dq,
+        \(dqtype\(dq: \(dqfile\(dq
     }
 }
 .ft P
@@ -715,15 +715,15 @@ Generated when Syncthing begins synchronizing a file to a newer version.
 .nf
 .ft C
 {
-    "id": 93,
-    "globalID": 93,
-    "type": "ItemStarted",
-    "time": "2014\-07\-13T21:22:03.414609034+02:00",
-    "data": {
-        "item": "test.txt",
-        "folder": "default",
-        "type": "file",
-        "action": "update"
+    \(dqid\(dq: 93,
+    \(dqglobalID\(dq: 93,
+    \(dqtype\(dq: \(dqItemStarted\(dq,
+    \(dqtime\(dq: \(dq2014\-07\-13T21:22:03.414609034+02:00\(dq,
+    \(dqdata\(dq: {
+        \(dqitem\(dq: \(dqtest.txt\(dq,
+        \(dqfolder\(dq: \(dqdefault\(dq,
+        \(dqtype\(dq: \(dqfile\(dq,
+        \(dqaction\(dq: \(dqupdate\(dq
     }
 }
 .ft P
@@ -737,53 +737,53 @@ New in version 0.11.10: The \fBmetadata\fP action.
 
 .SS ListenAddressesChanged
 .sp
-This event is emitted when a listen address changes.
+This event is emitted when a \fI\%listen address\fP changes.
 .INDENT 0.0
 .INDENT 3.5
 .sp
 .nf
 .ft C
 {
-   "type" : "ListenAddressesChanged",
-   "id" : 70,
-   "time" : "2017\-03\-06T15:01:24.88340663+01:00",
-   "globalID" : 70,
-   "data" : {
-      "address" : {
-         "Fragment" : "",
-         "RawQuery" : "",
-         "Scheme" : "dynamic+https",
-         "Path" : "/endpoint",
-         "RawPath" : "",
-         "User" : null,
-         "ForceQuery" : false,
-         "Host" : "relays.syncthing.net",
-         "Opaque" : ""
+   \(dqtype\(dq : \(dqListenAddressesChanged\(dq,
+   \(dqid\(dq : 70,
+   \(dqtime\(dq : \(dq2017\-03\-06T15:01:24.88340663+01:00\(dq,
+   \(dqglobalID\(dq : 70,
+   \(dqdata\(dq : {
+      \(dqaddress\(dq : {
+         \(dqFragment\(dq : \(dq\(dq,
+         \(dqRawQuery\(dq : \(dq\(dq,
+         \(dqScheme\(dq : \(dqdynamic+https\(dq,
+         \(dqPath\(dq : \(dq/endpoint\(dq,
+         \(dqRawPath\(dq : \(dq\(dq,
+         \(dqUser\(dq : null,
+         \(dqForceQuery\(dq : false,
+         \(dqHost\(dq : \(dqrelays.syncthing.net\(dq,
+         \(dqOpaque\(dq : \(dq\(dq
       },
-      "wan" : [
+      \(dqwan\(dq : [
          {
-            "ForceQuery" : false,
-            "User" : null,
-            "Host" : "31.15.66.212:443",
-            "Opaque" : "",
-            "Path" : "/",
-            "RawPath" : "",
-            "RawQuery" : "id=F4HSJVO\-CP2C3IL\-YLQYLSU\-XTYODAG\-PPU4LGV\-PH3MU4N\-G6K56DV\-IPN47A&pingInterval=1m0s&networkTimeout=2m0s&sessionLimitBps=0&globalLimitBps=0&statusAddr=:22070&providedBy=",
-            "Scheme" : "relay",
-            "Fragment" : ""
+            \(dqForceQuery\(dq : false,
+            \(dqUser\(dq : null,
+            \(dqHost\(dq : \(dq31.15.66.212:443\(dq,
+            \(dqOpaque\(dq : \(dq\(dq,
+            \(dqPath\(dq : \(dq/\(dq,
+            \(dqRawPath\(dq : \(dq\(dq,
+            \(dqRawQuery\(dq : \(dqid=F4HSJVO\-CP2C3IL\-YLQYLSU\-XTYODAG\-PPU4LGV\-PH3MU4N\-G6K56DV\-IPN47A&pingInterval=1m0s&networkTimeout=2m0s&sessionLimitBps=0&globalLimitBps=0&statusAddr=:22070&providedBy=\(dq,
+            \(dqScheme\(dq : \(dqrelay\(dq,
+            \(dqFragment\(dq : \(dq\(dq
          }
       ],
-      "lan" : [
+      \(dqlan\(dq : [
          {
-            "RawQuery" : "id=F4HSJVO\-CP2C3IL\-YLQYLSU\-XTYODAG\-PPU4LGV\-PH3MU4N\-G6K56DV\-IPN47A&pingInterval=1m0s&networkTimeout=2m0s&sessionLimitBps=0&globalLimitBps=0&statusAddr=:22070&providedBy=",
-            "Scheme" : "relay",
-            "Fragment" : "",
-            "RawPath" : "",
-            "Path" : "/",
-            "Host" : "31.15.66.212:443",
-            "Opaque" : "",
-            "ForceQuery" : false,
-            "User" : null
+            \(dqRawQuery\(dq : \(dqid=F4HSJVO\-CP2C3IL\-YLQYLSU\-XTYODAG\-PPU4LGV\-PH3MU4N\-G6K56DV\-IPN47A&pingInterval=1m0s&networkTimeout=2m0s&sessionLimitBps=0&globalLimitBps=0&statusAddr=:22070&providedBy=\(dq,
+            \(dqScheme\(dq : \(dqrelay\(dq,
+            \(dqFragment\(dq : \(dq\(dq,
+            \(dqRawPath\(dq : \(dq\(dq,
+            \(dqPath\(dq : \(dq/\(dq,
+            \(dqHost\(dq : \(dq31.15.66.212:443\(dq,
+            \(dqOpaque\(dq : \(dq\(dq,
+            \(dqForceQuery\(dq : false,
+            \(dqUser\(dq : null
          }
       ]
    }
@@ -796,13 +796,13 @@ This event is emitted when a listen address changes.
 .sp
 Generated upon scan whenever the local disk has discovered an updated file from the
 previous scan.  This does \fInot\fP include events that are discovered and copied from
-other devices (remotechangedetected), only files that were changed on the
+other devices (\fI\%RemoteChangeDetected\fP), only files that were changed on the
 local filesystem.
 .sp
 \fBNOTE:\fP
 .INDENT 0.0
 .INDENT 3.5
-This event is not included in /rest/events\-get endpoint without
+This event is not included in \fI\%GET /rest/events\fP endpoint without
 a mask specified, but needs to be selected explicitly.
 .UNINDENT
 .UNINDENT
@@ -812,17 +812,17 @@ a mask specified, but needs to be selected explicitly.
 .nf
 .ft C
 {
-  "id": 7,
-  "globalID": 59,
-  "time": "2016\-09\-26T22:07:10.7189141\-04:00",
-  "type": "LocalChangeDetected",
-  "data": {
-    "action": "deleted",
-    "folder": "vitwy\-zjxqt",
-    "folderID": "vitwy\-zjxqt",
-    "label": "TestSync",
-    "path": "test file.rtf",
-    "type": "file"
+  \(dqid\(dq: 7,
+  \(dqglobalID\(dq: 59,
+  \(dqtime\(dq: \(dq2016\-09\-26T22:07:10.7189141\-04:00\(dq,
+  \(dqtype\(dq: \(dqLocalChangeDetected\(dq,
+  \(dqdata\(dq: {
+    \(dqaction\(dq: \(dqdeleted\(dq,
+    \(dqfolder\(dq: \(dqvitwy\-zjxqt\(dq,
+    \(dqfolderID\(dq: \(dqvitwy\-zjxqt\(dq,
+    \(dqlabel\(dq: \(dqTestSync\(dq,
+    \(dqpath\(dq: \(dqtest file.rtf\(dq,
+    \(dqtype\(dq: \(dqfile\(dq
   }
 }
 .ft P
@@ -844,20 +844,20 @@ changes during a scan.
 .nf
 .ft C
 {
-    "id": 59,
-    "globalID": 59,
-    "type": "LocalIndexUpdated",
-    "time": "2014\-07\-17T13:27:28.051369434+02:00",
-    "data": {
-        "folder": "default",
-        "items": 1000,
-        "filenames": [
-            "foo",
-            "bar",
-            "baz"
+    \(dqid\(dq: 59,
+    \(dqglobalID\(dq: 59,
+    \(dqtype\(dq: \(dqLocalIndexUpdated\(dq,
+    \(dqtime\(dq: \(dq2014\-07\-17T13:27:28.051369434+02:00\(dq,
+    \(dqdata\(dq: {
+        \(dqfolder\(dq: \(dqdefault\(dq,
+        \(dqitems\(dq: 1000,
+        \(dqfilenames\(dq: [
+            \(dqfoo\(dq,
+            \(dqbar\(dq,
+            \(dqbaz\(dq
         ],
-        "sequence": 12345,
-        "version": 12345
+        \(dqsequence\(dq: 12345,
+        \(dqversion\(dq: 12345
     }
 }
 .ft P
@@ -881,15 +881,15 @@ origin of the request, but e.g. a reverse proxy.
 .nf
 .ft C
 {
-   "id" : 187,
-   "time" : "2017\-03\-07T00:19:24.420386143+01:00",
-   "data" : {
-      "remoteAddress" : "127.0.0.1:55530",
-      "username" : "somename",
-      "success" : false
+   \(dqid\(dq : 187,
+   \(dqtime\(dq : \(dq2017\-03\-07T00:19:24.420386143+01:00\(dq,
+   \(dqdata\(dq : {
+      \(dqremoteAddress\(dq : \(dq127.0.0.1:55530\(dq,
+      \(dqusername\(dq : \(dqsomename\(dq,
+      \(dqsuccess\(dq : false
    },
-   "type" : "LoginAttempt",
-   "globalID" : 195
+   \(dqtype\(dq : \(dqLoginAttempt\(dq,
+   \(dqglobalID\(dq : 195
 }
 .ft P
 .fi
@@ -908,20 +908,20 @@ unknown ID) or removed (device is ignored, dismissed or added).
 .nf
 .ft C
 {
-  "id": 87,
-  "type": "PendingDevicesChanged",
-  "time": "2020\-12\-22T22:24:37.578586718+01:00",
-  "data": {
-    "added": [
+  \(dqid\(dq: 87,
+  \(dqtype\(dq: \(dqPendingDevicesChanged\(dq,
+  \(dqtime\(dq: \(dq2020\-12\-22T22:24:37.578586718+01:00\(dq,
+  \(dqdata\(dq: {
+    \(dqadded\(dq: [
       {
-        "address": "127.0.0.1:51807",
-        "deviceID": "EJHMPAQ\-OGCVORE\-ISB4IS3\-SYYVJXF\-TKJGLTU\-66DIQPF\-GJ5D2GX\-GQ3OWQK",
-        "name": "My dusty computer"
+        \(dqaddress\(dq: \(dq127.0.0.1:51807\(dq,
+        \(dqdeviceID\(dq: \(dqEJHMPAQ\-OGCVORE\-ISB4IS3\-SYYVJXF\-TKJGLTU\-66DIQPF\-GJ5D2GX\-GQ3OWQK\(dq,
+        \(dqname\(dq: \(dqMy dusty computer\(dq
       }
     ],
-    "removed": [
+    \(dqremoved\(dq: [
       {
-        "deviceID": "P56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2"
+        \(dqdeviceID\(dq: \(dqP56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2\(dq
       }
     ]
   }
@@ -946,26 +946,26 @@ longer pending for any device.
 .nf
 .ft C
 {
-  "id": 101,
-  "type": "PendingFoldersChanged",
-  "time": "2020\-12\-22T22:36:55.66744317+01:00",
-  "data": {
-    "added": [
+  \(dqid\(dq: 101,
+  \(dqtype\(dq: \(dqPendingFoldersChanged\(dq,
+  \(dqtime\(dq: \(dq2020\-12\-22T22:36:55.66744317+01:00\(dq,
+  \(dqdata\(dq: {
+    \(dqadded\(dq: [
       {
-        "deviceID": "EJHMPAQ\-OGCVORE\-ISB4IS3\-SYYVJXF\-TKJGLTU\-66DIQPF\-GJ5D2GX\-GQ3OWQK",
-        "folderID": "GXWxf\-3zgnU",
-        "folderLabel": "My Pictures"
-        "receiveEncrypted": "false"
-        "remoteEncrypted": "false"
+        \(dqdeviceID\(dq: \(dqEJHMPAQ\-OGCVORE\-ISB4IS3\-SYYVJXF\-TKJGLTU\-66DIQPF\-GJ5D2GX\-GQ3OWQK\(dq,
+        \(dqfolderID\(dq: \(dqGXWxf\-3zgnU\(dq,
+        \(dqfolderLabel\(dq: \(dqMy Pictures\(dq
+        \(dqreceiveEncrypted\(dq: \(dqfalse\(dq
+        \(dqremoteEncrypted\(dq: \(dqfalse\(dq
       }
     ],
-    "removed": [
+    \(dqremoved\(dq: [
       {
-        "deviceID": "P56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2",
-        "folderID": "neyfh\-sa2nu"
+        \(dqdeviceID\(dq: \(dqP56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2\(dq,
+        \(dqfolderID\(dq: \(dqneyfh\-sa2nu\(dq
       },
       {
-        "folderID": "abcde\-fghij"
+        \(dqfolderID\(dq: \(dqabcde\-fghij\(dq
       }
     ]
   }
@@ -977,12 +977,12 @@ longer pending for any device.
 .SS RemoteChangeDetected
 .sp
 Generated upon scan whenever a file is locally updated due to a remote change.
-Files that are updated locally produce a localchangedetected event.
+Files that are updated locally produce a \fI\%LocalChangeDetected\fP event.
 .sp
 \fBNOTE:\fP
 .INDENT 0.0
 .INDENT 3.5
-This event is not included in /rest/events\-get endpoint without
+This event is not included in \fI\%GET /rest/events\fP endpoint without
 a mask specified, but needs to be selected explicitly.
 .UNINDENT
 .UNINDENT
@@ -992,19 +992,19 @@ a mask specified, but needs to be selected explicitly.
 .nf
 .ft C
 {
-   "time" : "2017\-03\-06T23:58:21.844739891+01:00",
-   "globalID" : 123,
-   "data" : {
-      "type" : "file",
-      "action" : "deleted",
-      "folder": "Dokumente",
-      "folderID" : "Dokumente",
-      "path" : "testfile",
-      "label" : "Dokumente",
-      "modifiedBy" : "BPDFDTU"
+   \(dqtime\(dq : \(dq2017\-03\-06T23:58:21.844739891+01:00\(dq,
+   \(dqglobalID\(dq : 123,
+   \(dqdata\(dq : {
+      \(dqtype\(dq : \(dqfile\(dq,
+      \(dqaction\(dq : \(dqdeleted\(dq,
+      \(dqfolder\(dq: \(dqDokumente\(dq,
+      \(dqfolderID\(dq : \(dqDokumente\(dq,
+      \(dqpath\(dq : \(dqtestfile\(dq,
+      \(dqlabel\(dq : \(dqDokumente\(dq,
+      \(dqmodifiedBy\(dq : \(dqBPDFDTU\(dq
    },
-   "type" : "RemoteChangeDetected",
-   "id" : 2
+   \(dqtype\(dq : \(dqRemoteChangeDetected\(dq,
+   \(dqid\(dq : 2
 }
 .ft P
 .fi
@@ -1016,7 +1016,7 @@ Deprecated since version v1.1.2: The \fBfolderID\fP field is a legacy name kept
 
 .SS RemoteDownloadProgress
 .sp
-This event is emitted when a download\-progress message is
+This event is emitted when a \fI\%DownloadProgress\fP message is
 received. It returns a map \fBdata\fP of filenames with a count of
 downloaded blocks. The files in questions are currently being
 downloaded on the remote \fBdevice\fP and belong to \fBfolder\fP\&.
@@ -1026,17 +1026,17 @@ downloaded on the remote \fBdevice\fP and belong to \fBfolder\fP\&.
 .nf
 .ft C
 {
-   "time" : "2017\-03\-07T00:11:37.65838955+01:00",
-   "globalID" : 170,
-   "data" : {
-      "state" : {
-         "tahr64\-6.0.5.iso" : 1784
+   \(dqtime\(dq : \(dq2017\-03\-07T00:11:37.65838955+01:00\(dq,
+   \(dqglobalID\(dq : 170,
+   \(dqdata\(dq : {
+      \(dqstate\(dq : {
+         \(dqtahr64\-6.0.5.iso\(dq : 1784
       },
-      "device" : "F4HSJVO\-CP2C3IL\-YLQYLSU\-XTYODAG\-PPU4LGV\-PH3MU4N\-G6K56DV\-IPN47A",
-      "folder" : "Dokumente"
+      \(dqdevice\(dq : \(dqF4HSJVO\-CP2C3IL\-YLQYLSU\-XTYODAG\-PPU4LGV\-PH3MU4N\-G6K56DV\-IPN47A\(dq,
+      \(dqfolder\(dq : \(dqDokumente\(dq
    },
-   "type" : "RemoteDownloadProgress",
-   "id" : 163
+   \(dqtype\(dq : \(dqRemoteDownloadProgress\(dq,
+   \(dqid\(dq : 163
 }
 .ft P
 .fi
@@ -1051,14 +1051,14 @@ Generated each time new index information is received from a device.
 .nf
 .ft C
 {
-    "id": 44,
-    "globalID": 44,
-    "type": "RemoteIndexUpdated",
-    "time": "2014\-07\-13T21:04:35.394184435+02:00",
-    "data": {
-        "device": "NFGKEKE\-7Z6RTH7\-I3PRZXS\-DEJF3UJ\-FRWJBFO\-VBBTDND\-4SGNGVZ\-QUQHJAG",
-        "folder": "lightroom",
-        "items": 1000
+    \(dqid\(dq: 44,
+    \(dqglobalID\(dq: 44,
+    \(dqtype\(dq: \(dqRemoteIndexUpdated\(dq,
+    \(dqtime\(dq: \(dq2014\-07\-13T21:04:35.394184435+02:00\(dq,
+    \(dqdata\(dq: {
+        \(dqdevice\(dq: \(dqNFGKEKE\-7Z6RTH7\-I3PRZXS\-DEJF3UJ\-FRWJBFO\-VBBTDND\-4SGNGVZ\-QUQHJAG\(dq,
+        \(dqfolder\(dq: \(dqlightroom\(dq,
+        \(dqitems\(dq: 1000
     }
 }
 .ft P
@@ -1075,12 +1075,12 @@ configuration etc.
 .nf
 .ft C
 {
-    "id": 1,
-    "globalID": 1,
-    "type": "Starting",
-    "time": "2014\-07\-17T13:13:32.044470055+02:00",
-    "data": {
-        "home": "/home/jb/.config/syncthing"
+    \(dqid\(dq: 1,
+    \(dqglobalID\(dq: 1,
+    \(dqtype\(dq: \(dqStarting\(dq,
+    \(dqtime\(dq: \(dq2014\-07\-17T13:13:32.044470055+02:00\(dq,
+    \(dqdata\(dq: {
+        \(dqhome\(dq: \(dq/home/jb/.config/syncthing\(dq
     }
 }
 .ft P
@@ -1097,11 +1097,11 @@ ready to start exchanging data with other devices.
 .nf
 .ft C
 {
-    "id": 1,
-    "globalID": 1,
-    "type": "StartupComplete",
-    "time": "2014\-07\-13T21:03:18.383239179+02:00",
-    "data": null
+    \(dqid\(dq: 1,
+    \(dqglobalID\(dq: 1,
+    \(dqtype\(dq: \(dqStartupComplete\(dq,
+    \(dqtime\(dq: \(dq2014\-07\-13T21:03:18.383239179+02:00\(dq,
+    \(dqdata\(dq: null
 }
 .ft P
 .fi
@@ -1120,15 +1120,15 @@ seconds and is now in state \fBidle\fP\&.
 .nf
 .ft C
 {
-    "id": 8,
-    "globalID": 8,
-    "type": "StateChanged",
-    "time": "2014\-07\-17T13:14:28.697493016+02:00",
-    "data": {
-        "folder": "default",
-        "from": "scanning",
-        "duration": 0.19782869900000002,
-        "to": "idle"
+    \(dqid\(dq: 8,
+    \(dqglobalID\(dq: 8,
+    \(dqtype\(dq: \(dqStateChanged\(dq,
+    \(dqtime\(dq: \(dq2014\-07\-17T13:14:28.697493016+02:00\(dq,
+    \(dqdata\(dq: {
+        \(dqfolder\(dq: \(dqdefault\(dq,
+        \(dqfrom\(dq: \(dqscanning\(dq,
+        \(dqduration\(dq: 0.19782869900000002,
+        \(dqto\(dq: \(dqidle\(dq
     }
 }
 .ft P
diff --git a/man/syncthing-faq.7 b/man/syncthing-faq.7
index 612d2c234..96e00f338 100644
--- a/man/syncthing-faq.7
+++ b/man/syncthing-faq.7
@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-FAQ" "7" "Sep 07, 2023" "v1.24.0" "Syncthing"
+.TH "SYNCTHING-FAQ" "7" "Sep 17, 2023" "v1.24.0" "Syncthing"
 .SH NAME
 syncthing-faq \- Frequently Asked Questions
 .INDENT 0.0
@@ -164,7 +164,7 @@ Directory modification times (not preserved)
 Hard links (followed, not preserved)
 .IP \(bu 2
 Windows junctions (synced as ordinary directories; require enabling in
-\fBthe configuration\fP on a per\-folder
+\fI\%the configuration\fP on a per\-folder
 basis)
 .IP \(bu 2
 Resource forks (not preserved)
@@ -176,7 +176,7 @@ Devices, FIFOs, and other specials (ignored)
 Sparse file sparseness (will become sparse, when supported by the OS & filesystem)
 .IP \(bu 2
 Syncthing internal files and folders (e.g. \fB\&.stfolder\fP, \fB\&.stignore\fP,
-\fB\&.stversions\fP, temporary files, etc.)
+\fB\&.stversions\fP, \fI\%temporary files\fP, etc.)
 .UNINDENT
 .SS Is synchronization fast?
 .sp
@@ -191,7 +191,7 @@ manner. This means that renaming a file will not cause a retransmission of
 that file. Additionally, appending data to existing files should be handled
 efficiently as well.
 .sp
-Temporary files are used to store partial data
+\fI\%Temporary files\fP are used to store partial data
 downloaded from other devices. They are automatically removed whenever a file
 transfer has been completed or after the configured amount of time which is set
 in the configuration file (24 hours by default).
@@ -236,7 +236,7 @@ oyster!)
 \fBSEE ALSO:\fP
 .INDENT 0.0
 .INDENT 3.5
-device\-ids
+\fI\%Understanding Device IDs\fP
 .UNINDENT
 .UNINDENT
 .SH TROUBLESHOOTING
@@ -262,7 +262,7 @@ Devices” list on the right side of the GUI, double check that you see
 .sp
 If you are connected via a relay, this is because a direct connection could
 not be established. Double check and follow the suggestions in
-firewall\-setup to enable direct connections.
+\fI\%Firewall Setup\fP to enable direct connections.
 .sp
 Second, if one of the devices is a very low powered machine (a Raspberry Pi,
 or a phone, or a NAS, or similar) you are likely constrained by the CPU on
@@ -295,7 +295,7 @@ causes a certain amount of extra CPU usage to calculate the summary data it
 presents. Note however that once things are \fIin sync\fP CPU usage should be
 negligible.
 .sp
-To minimize the impact of this, Syncthing attempts to \fBlower the
+To minimize the impact of this, Syncthing attempts to \fI\%lower the
 process priority\fP when starting up.
 .sp
 To further limit the amount of CPU used when syncing and scanning, set the
@@ -328,7 +328,7 @@ protect against unauthorized access. Either:
 .IP \(bu 2
 Make sure the proxy sets a \fBHost\fP header containing \fBlocalhost\fP, or
 .IP \(bu 2
-Set \fBgui.insecureSkipHostcheck\fP in the advanced settings, or
+Set \fI\%gui.insecureSkipHostcheck\fP in the advanced settings, or
 .IP \(bu 2
 Bind the GUI/API to a non\-localhost listen port.
 .UNINDENT
@@ -338,8 +338,8 @@ In all cases, username/password authentication and HTTPS should be used.
 .sp
 This is almost always a result of bad RAM, storage device or other hardware.
 When the index database is found to be corrupt Syncthing cannot operate and will
-note this in the logs and exit. To overcome this delete the database
-folder inside Syncthing’s data directory and re\-start
+note this in the logs and exit. To overcome this delete the \fI\%database
+folder\fP inside Syncthing’s data directory and re\-start
 Syncthing. It will then need to perform a full re\-hashing of all shared
 folders. You should check your system in case the underlying cause is indeed
 faulty hardware which may put the system at risk of further data loss.
@@ -374,7 +374,7 @@ up\-to\-date state with all the neighbours.
 .SS Why does Syncthing connect to this unknown/suspicious address?
 .sp
 If you see outgoing connections to odd and unexpected addresses these are
-most likely connections to relay servers\&. Relay servers
+most likely connections to \fI\%relay servers\fP\&. Relay servers
 are run by volunteers all over the world. They usually listen on ports 443 or
 22067, though this is controlled by the user running it. You can compare the
 address you are concerned about with \fI\%the current list of active relays\fP <\fBhttps://relays.syncthing.net\fP>\&. Relays do not and can not see the data
@@ -420,7 +420,7 @@ Also see the \fI\%marker FAQ\fP for more information about the folder marker.
 \fBSEE ALSO:\fP
 .INDENT 0.0
 .INDENT 3.5
-conflict\-handling
+\fI\%Conflicting Changes\fP
 .UNINDENT
 .UNINDENT
 .SS How do I serve a folder from a read only filesystem?
@@ -459,11 +459,11 @@ locally may be overwritten by those on other devices.
 .sp
 An alternative way is to shut down Syncthing, move the folder on disk (including
 the \fB\&.stfolder\fP marker), edit the path directly in \fBconfig.xml\fP in the
-configuration folder (see /users/config) and then start Syncthing again.
+configuration folder (see \fI\%Syncthing Configuration\fP) and then start Syncthing again.
 .SS How do I configure multiple users on a single machine?
 .sp
 Each user should run their own Syncthing instance. Be aware that you might need
-to configure listening ports such that they do not overlap (see /users/config).
+to configure listening ports such that they do not overlap (see \fI\%Syncthing Configuration\fP).
 .SS Does Syncthing support syncing between folders on the same system?
 .sp
 No. Syncthing is not designed to sync locally and the overhead involved in
@@ -529,7 +529,7 @@ UI from \fB127.0.0.1:8384\fP to
 .sp
 .nf
 .ft C
-<gui enabled="true" tls="false">
+<gui enabled=\(dqtrue\(dq tls=\(dqfalse\(dq>
   <address>127.0.0.1:8384</address>
 .ft P
 .fi
@@ -542,7 +542,7 @@ to
 .sp
 .nf
 .ft C
-<gui enabled="true" tls="false">
+<gui enabled=\(dqtrue\(dq tls=\(dqfalse\(dq>
   <address>0.0.0.0:8384</address>
 .ft P
 .fi
@@ -668,7 +668,7 @@ On many Linux distributions you can run the following to fix it:
 .sp
 .nf
 .ft C
-echo "fs.inotify.max_user_watches=204800" | sudo tee \-a /etc/sysctl.conf
+echo \(dqfs.inotify.max_user_watches=204800\(dq | sudo tee \-a /etc/sysctl.conf
 .ft P
 .fi
 .UNINDENT
@@ -681,7 +681,7 @@ separate file, i.e. you should run:
 .sp
 .nf
 .ft C
-echo "fs.inotify.max_user_watches=204800" | sudo tee \-a /etc/sysctl.d/90\-override.conf
+echo \(dqfs.inotify.max_user_watches=204800\(dq | sudo tee \-a /etc/sysctl.d/90\-override.conf
 .ft P
 .fi
 .UNINDENT
@@ -701,7 +701,7 @@ echo 204800 | sudo tee /proc/sys/fs/inotify/max_user_watches
 .SS How do I reset the GUI password?
 .sp
 If you’ve forgotten / lost the GUI password, you can reset it using the
-\fB\-\-gui\-password\fP (and possibly \fB\-\-gui\-user\fP) options to the
+\fI\%\-\-gui\-password\fP (and possibly \fI\%\-\-gui\-user\fP) options to the
 \fBsyncthing generate\fP subcommand.  This should be done while Syncthing is not
 running.
 .INDENT 0.0
@@ -713,9 +713,9 @@ Stop Syncthing: \fBsyncthing cli operations shutdown\fP
 Restart Syncthing as usual.
 .UNINDENT
 .sp
-\fIAlternatively, in step 2\fP, you can manually delete the \fB<user>\fP and \fB<password>\fP XML tags from the
+\fIAlternatively, in step 2\fP, you can manually delete the \fI\%<user>\fP and \fI\%<password>\fP XML tags from the
 \fB<gui>\fP block in file \fBconfig.xml\fP\&.  The location of the file depends on the
-OS and is described in the configuration documentation\&.
+OS and is described in the \fI\%configuration documentation\fP\&.
 .sp
 For example, the two emphasized lines below would be removed from the file.
 .INDENT 0.0
@@ -723,7 +723,7 @@ For example, the two emphasized lines below would be removed from the file.
 .sp
 .nf
 .ft C
-<gui enabled="true" tls="false" debugging="false">
+<gui enabled=\(dqtrue\(dq tls=\(dqfalse\(dq debugging=\(dqfalse\(dq>
    <address>127.0.0.1:8384</address>
    <user>syncguy</user>
    <password>$2a$10$s9wWHOQe...Cq7GPye69</password>
diff --git a/man/syncthing-globaldisco.7 b/man/syncthing-globaldisco.7
index 9357c7708..5469e6b37 100644
--- a/man/syncthing-globaldisco.7
+++ b/man/syncthing-globaldisco.7
@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-GLOBALDISCO" "7" "Sep 07, 2023" "v1.24.0" "Syncthing"
+.TH "SYNCTHING-GLOBALDISCO" "7" "Sep 17, 2023" "v1.24.0" "Syncthing"
 .SH NAME
 syncthing-globaldisco \- Global Discovery Protocol v3
 .SH ANNOUNCEMENTS
@@ -42,7 +42,7 @@ listing connection addresses (if any):
 .nf
 .ft C
 {
-        addresses: ["tcp://192.0.2.45:22000", "tcp://:22202", "relay://192.0.2.99:22028"],
+        addresses: [\(dqtcp://192.0.2.45:22000\(dq, \(dqtcp://:22202\(dq, \(dqrelay://192.0.2.99:22028\(dq],
 }
 .ft P
 .fi
diff --git a/man/syncthing-localdisco.7 b/man/syncthing-localdisco.7
index 4fef4d4b0..c0164f6be 100644
--- a/man/syncthing-localdisco.7
+++ b/man/syncthing-localdisco.7
@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-LOCALDISCO" "7" "Sep 07, 2023" "v1.24.0" "Syncthing"
+.TH "SYNCTHING-LOCALDISCO" "7" "Sep 17, 2023" "v1.24.0" "Syncthing"
 .SH NAME
 syncthing-localdisco \- Local Discovery Protocol v4
 .SH MODE OF OPERATION
@@ -55,7 +55,7 @@ previously unknown device is discovered or a device has restarted (see the
 .SH DEVICE ID
 .sp
 The device ID is the SHA\-256 (32 bytes) of the device X.509 certificate. See
-device\-ids in the Syncthing documentation.
+\fI\%Understanding Device IDs\fP in the Syncthing documentation.
 .SH ANNOUNCEMENT PACKET
 .sp
 The Announcement packet has the following structure:
diff --git a/man/syncthing-networking.7 b/man/syncthing-networking.7
index c7bde03e0..a01b8a6c3 100644
--- a/man/syncthing-networking.7
+++ b/man/syncthing-networking.7
@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-NETWORKING" "7" "Sep 07, 2023" "v1.24.0" "Syncthing"
+.TH "SYNCTHING-NETWORKING" "7" "Sep 17, 2023" "v1.24.0" "Syncthing"
 .SH NAME
 syncthing-networking \- Firewall Setup
 .SH ROUTER SETUP
@@ -57,7 +57,7 @@ Communication in Syncthing works both ways. Therefore if you set up port
 forwards for one device, other devices will be able to connect to it even when
 they are behind a NAT network or firewall.
 .sp
-In the absence of port forwarding, relaying may work well enough to get
+In the absence of port forwarding, \fI\%Relaying\fP may work well enough to get
 devices connected and synced, but will perform poorly in comparison to a
 direct connection.
 .SS Local Discovery
@@ -171,7 +171,7 @@ port 8384 on the target machine. This still works even if Syncthing is bound to
 listen on localhost only.
 .SH VIA A PROXY
 .sp
-Syncthing can use a SOCKS5 proxy for outbound connections. Please see proxying\&.
+Syncthing can use a SOCKS5 proxy for outbound connections. Please see \fI\%Using Proxies\fP\&.
 .SH AUTHOR
 The Syncthing Authors
 .SH COPYRIGHT
diff --git a/man/syncthing-relay.7 b/man/syncthing-relay.7
index ae91be73e..82e694b14 100644
--- a/man/syncthing-relay.7
+++ b/man/syncthing-relay.7
@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-RELAY" "7" "Sep 07, 2023" "v1.24.0" "Syncthing"
+.TH "SYNCTHING-RELAY" "7" "Sep 17, 2023" "v1.24.0" "Syncthing"
 .SH NAME
 syncthing-relay \- Relay Protocol v1
 .SH WHAT IS A RELAY?
diff --git a/man/syncthing-rest-api.7 b/man/syncthing-rest-api.7
index 295ba1990..2b1a475fb 100644
--- a/man/syncthing-rest-api.7
+++ b/man/syncthing-rest-api.7
@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-REST-API" "7" "Sep 07, 2023" "v1.24.0" "Syncthing"
+.TH "SYNCTHING-REST-API" "7" "Sep 17, 2023" "v1.24.0" "Syncthing"
 .SH NAME
 syncthing-rest-api \- REST API
 .sp
@@ -41,9 +41,9 @@ To use the REST API an API key must be set and used. The API key can be
 generated in the GUI, or set in the \fBconfiguration/gui/apikey\fP element in
 the configuration file. To use an API key, set the request header
 \fBX\-API\-Key\fP to the API key value, or set it as a \fBBearer\fP token in the
-\fBAuthorization\fP header. For example, \fBcurl \-X POST \-H "X\-API\-Key: abc123"
-http://localhost:8384/rest/...\fP or \fBcurl \-X POST \-H "Authorization: Bearer
-abc123" http://localhost:8384/rest/...\fP can be used to invoke with \fBcurl\fP
+\fBAuthorization\fP header. For example, \fBcurl \-X POST \-H \(dqX\-API\-Key: abc123\(dq
+http://localhost:8384/rest/...\fP or \fBcurl \-X POST \-H \(dqAuthorization: Bearer
+abc123\(dq http://localhost:8384/rest/...\fP can be used to invoke with \fBcurl\fP
 (add \fB\-k\fP flag when using HTTPS with a Syncthing generated or self signed
 certificate).
 .sp
@@ -70,33 +70,33 @@ to the given path (e.g. \fB/tmp/\fP matches all its subdirectories). If the opti
 .sp
 .nf
 .ft C
-$ curl \-H "X\-API\-Key: yourkey" localhost:8384/rest/system/browse | json_pp
+$ curl \-H \(dqX\-API\-Key: yourkey\(dq localhost:8384/rest/system/browse | json_pp
 [
-    "/"
+    \(dq/\(dq
 ]
 
-$ curl \-H "X\-API\-Key: yourkey" localhost:8384/rest/system/browse?current=/var/ | json_pp
+$ curl \-H \(dqX\-API\-Key: yourkey\(dq localhost:8384/rest/system/browse?current=/var/ | json_pp
 [
-    "/var/backups/",
-    "/var/cache/",
-    "/var/lib/",
-    "/var/local/",
-    "/var/lock/",
-    "/var/log/",
-    "/var/mail/",
-    "/var/opt/",
-    "/var/run/",
-    "/var/spool/",
-    "/var/tmp/"
+    \(dq/var/backups/\(dq,
+    \(dq/var/cache/\(dq,
+    \(dq/var/lib/\(dq,
+    \(dq/var/local/\(dq,
+    \(dq/var/lock/\(dq,
+    \(dq/var/log/\(dq,
+    \(dq/var/mail/\(dq,
+    \(dq/var/opt/\(dq,
+    \(dq/var/run/\(dq,
+    \(dq/var/spool/\(dq,
+    \(dq/var/tmp/\(dq
 ]
 
-$ curl \-H "X\-API\-Key: yourkey" localhost:8384/rest/system/browse?current=/var/*o | json_pp
+$ curl \-H \(dqX\-API\-Key: yourkey\(dq localhost:8384/rest/system/browse?current=/var/*o | json_pp
 [
-    "/var/local/",
-    "/var/lock/",
-    "/var/log/",
-    "/var/opt/",
-    "/var/spool/"
+    \(dq/var/local/\(dq,
+    \(dq/var/lock/\(dq,
+    \(dq/var/log/\(dq,
+    \(dq/var/opt/\(dq,
+    \(dq/var/spool/\(dq
 ]
 .ft P
 .fi
@@ -104,7 +104,7 @@ $ curl \-H "X\-API\-Key: yourkey" localhost:8384/rest/system/browse?current=/var
 .UNINDENT
 .SS GET /rest/system/config (DEPRECATED)
 .sp
-Deprecated since version v1.12.0: This endpoint still works as before but is deprecated. Use rest\-config
+Deprecated since version v1.12.0: This endpoint still works as before but is deprecated. Use \fI\%/rest/config\fP
 instead.
 
 .sp
@@ -115,256 +115,256 @@ Returns the current configuration.
 .nf
 .ft C
 {
-  "version": 35,
-  "folders": [
+  \(dqversion\(dq: 35,
+  \(dqfolders\(dq: [
     {
-      "id": "default",
-      "label": "Default Folder",
-      "filesystemType": "basic",
-      "path": "...",
-      "type": "sendreceive",
-      "devices": [
+      \(dqid\(dq: \(dqdefault\(dq,
+      \(dqlabel\(dq: \(dqDefault Folder\(dq,
+      \(dqfilesystemType\(dq: \(dqbasic\(dq,
+      \(dqpath\(dq: \(dq...\(dq,
+      \(dqtype\(dq: \(dqsendreceive\(dq,
+      \(dqdevices\(dq: [
         {
-          "deviceID": "...",
-          "introducedBy": "",
-          "encryptionPassword": ""
+          \(dqdeviceID\(dq: \(dq...\(dq,
+          \(dqintroducedBy\(dq: \(dq\(dq,
+          \(dqencryptionPassword\(dq: \(dq\(dq
         }
       ],
-      "rescanIntervalS": 3600,
-      "fsWatcherEnabled": true,
-      "fsWatcherDelayS": 10,
-      "ignorePerms": false,
-      "autoNormalize": true,
-      "minDiskFree": {
-        "value": 1,
-        "unit": "%"
+      \(dqrescanIntervalS\(dq: 3600,
+      \(dqfsWatcherEnabled\(dq: true,
+      \(dqfsWatcherDelayS\(dq: 10,
+      \(dqignorePerms\(dq: false,
+      \(dqautoNormalize\(dq: true,
+      \(dqminDiskFree\(dq: {
+        \(dqvalue\(dq: 1,
+        \(dqunit\(dq: \(dq%\(dq
       },
-      "versioning": {
-        "type": "",
-        "params": {},
-        "cleanupIntervalS": 3600,
-        "fsPath": "",
-        "fsType": "basic"
+      \(dqversioning\(dq: {
+        \(dqtype\(dq: \(dq\(dq,
+        \(dqparams\(dq: {},
+        \(dqcleanupIntervalS\(dq: 3600,
+        \(dqfsPath\(dq: \(dq\(dq,
+        \(dqfsType\(dq: \(dqbasic\(dq
       },
-      "copiers": 0,
-      "pullerMaxPendingKiB": 0,
-      "hashers": 0,
-      "order": "random",
-      "ignoreDelete": false,
-      "scanProgressIntervalS": 0,
-      "pullerPauseS": 0,
-      "maxConflicts": \-1,
-      "disableSparseFiles": false,
-      "disableTempIndexes": false,
-      "paused": false,
-      "weakHashThresholdPct": 25,
-      "markerName": ".stfolder",
-      "copyOwnershipFromParent": false,
-      "modTimeWindowS": 0,
-      "maxConcurrentWrites": 2,
-      "disableFsync": false,
-      "blockPullOrder": "standard",
-      "copyRangeMethod": "standard",
-      "caseSensitiveFS": false,
-      "junctionsAsDirs": true
+      \(dqcopiers\(dq: 0,
+      \(dqpullerMaxPendingKiB\(dq: 0,
+      \(dqhashers\(dq: 0,
+      \(dqorder\(dq: \(dqrandom\(dq,
+      \(dqignoreDelete\(dq: false,
+      \(dqscanProgressIntervalS\(dq: 0,
+      \(dqpullerPauseS\(dq: 0,
+      \(dqmaxConflicts\(dq: \-1,
+      \(dqdisableSparseFiles\(dq: false,
+      \(dqdisableTempIndexes\(dq: false,
+      \(dqpaused\(dq: false,
+      \(dqweakHashThresholdPct\(dq: 25,
+      \(dqmarkerName\(dq: \(dq.stfolder\(dq,
+      \(dqcopyOwnershipFromParent\(dq: false,
+      \(dqmodTimeWindowS\(dq: 0,
+      \(dqmaxConcurrentWrites\(dq: 2,
+      \(dqdisableFsync\(dq: false,
+      \(dqblockPullOrder\(dq: \(dqstandard\(dq,
+      \(dqcopyRangeMethod\(dq: \(dqstandard\(dq,
+      \(dqcaseSensitiveFS\(dq: false,
+      \(dqjunctionsAsDirs\(dq: true
     }
   ],
-  "devices": [
+  \(dqdevices\(dq: [
     {
-      "deviceID": "...",
-      "name": "Laptop",
-      "addresses": [
-        "dynamic",
-        "tcp://192.168.1.2:22000"
+      \(dqdeviceID\(dq: \(dq...\(dq,
+      \(dqname\(dq: \(dqLaptop\(dq,
+      \(dqaddresses\(dq: [
+        \(dqdynamic\(dq,
+        \(dqtcp://192.168.1.2:22000\(dq
       ],
-      "compression": "metadata",
-      "certName": "",
-      "introducer": false,
-      "skipIntroductionRemovals": false,
-      "introducedBy": "",
-      "paused": false,
-      "allowedNetworks": [],
-      "autoAcceptFolders": false,
-      "maxSendKbps": 0,
-      "maxRecvKbps": 0,
-      "ignoredFolders": [
+      \(dqcompression\(dq: \(dqmetadata\(dq,
+      \(dqcertName\(dq: \(dq\(dq,
+      \(dqintroducer\(dq: false,
+      \(dqskipIntroductionRemovals\(dq: false,
+      \(dqintroducedBy\(dq: \(dq\(dq,
+      \(dqpaused\(dq: false,
+      \(dqallowedNetworks\(dq: [],
+      \(dqautoAcceptFolders\(dq: false,
+      \(dqmaxSendKbps\(dq: 0,
+      \(dqmaxRecvKbps\(dq: 0,
+      \(dqignoredFolders\(dq: [
         {
-          "time": "2022\-01\-09T19:09:52Z",
-          "id": "br63e\-wyhb7",
-          "label": "Foo"
+          \(dqtime\(dq: \(dq2022\-01\-09T19:09:52Z\(dq,
+          \(dqid\(dq: \(dqbr63e\-wyhb7\(dq,
+          \(dqlabel\(dq: \(dqFoo\(dq
         }
       ],
-      "maxRequestKiB": 0,
-      "untrusted": false,
-      "remoteGUIPort": 0
+      \(dqmaxRequestKiB\(dq: 0,
+      \(dquntrusted\(dq: false,
+      \(dqremoteGUIPort\(dq: 0
     }
   ],
-  "gui": {
-    "enabled": true,
-    "address": "127.0.0.1:8384",
-    "unixSocketPermissions": "",
-    "user": "Username",
-    "password": "$2a$10$ZFws69T4FlvWwsqeIwL.TOo5zOYqsa/.TxlUnsGYS.j3JvjFTmxo6",
-    "authMode": "static",
-    "useTLS": false,
-    "apiKey": "k1dnz1Dd0rzTBjjFFh7CXPnrF12C49B1",
-    "insecureAdminAccess": false,
-    "theme": "default",
-    "debugging": false,
-    "insecureSkipHostcheck": false,
-    "insecureAllowFrameLoading": false
+  \(dqgui\(dq: {
+    \(dqenabled\(dq: true,
+    \(dqaddress\(dq: \(dq127.0.0.1:8384\(dq,
+    \(dqunixSocketPermissions\(dq: \(dq\(dq,
+    \(dquser\(dq: \(dqUsername\(dq,
+    \(dqpassword\(dq: \(dq$2a$10$ZFws69T4FlvWwsqeIwL.TOo5zOYqsa/.TxlUnsGYS.j3JvjFTmxo6\(dq,
+    \(dqauthMode\(dq: \(dqstatic\(dq,
+    \(dquseTLS\(dq: false,
+    \(dqapiKey\(dq: \(dqk1dnz1Dd0rzTBjjFFh7CXPnrF12C49B1\(dq,
+    \(dqinsecureAdminAccess\(dq: false,
+    \(dqtheme\(dq: \(dqdefault\(dq,
+    \(dqdebugging\(dq: false,
+    \(dqinsecureSkipHostcheck\(dq: false,
+    \(dqinsecureAllowFrameLoading\(dq: false
   },
-  "ldap": {
-    "address": "",
-    "bindDN": "",
-    "transport": "plain",
-    "insecureSkipVerify": false,
-    "searchBaseDN": "",
-    "searchFilter": ""
+  \(dqldap\(dq: {
+    \(dqaddress\(dq: \(dq\(dq,
+    \(dqbindDN\(dq: \(dq\(dq,
+    \(dqtransport\(dq: \(dqplain\(dq,
+    \(dqinsecureSkipVerify\(dq: false,
+    \(dqsearchBaseDN\(dq: \(dq\(dq,
+    \(dqsearchFilter\(dq: \(dq\(dq
   },
-  "options": {
-    "listenAddresses": [
-      "default"
+  \(dqoptions\(dq: {
+    \(dqlistenAddresses\(dq: [
+      \(dqdefault\(dq
     ],
-    "globalAnnounceServers": [
-      "default"
+    \(dqglobalAnnounceServers\(dq: [
+      \(dqdefault\(dq
     ],
-    "globalAnnounceEnabled": true,
-    "localAnnounceEnabled": true,
-    "localAnnouncePort": 21027,
-    "localAnnounceMCAddr": "[ff12::8384]:21027",
-    "maxSendKbps": 0,
-    "maxRecvKbps": 0,
-    "reconnectionIntervalS": 60,
-    "relaysEnabled": true,
-    "relayReconnectIntervalM": 10,
-    "startBrowser": true,
-    "natEnabled": true,
-    "natLeaseMinutes": 60,
-    "natRenewalMinutes": 30,
-    "natTimeoutSeconds": 10,
-    "urAccepted": 0,
-    "urSeen": 0,
-    "urUniqueId": "...",
-    "urURL": "https://data.syncthing.net/newdata",
-    "urPostInsecurely": false,
-    "urInitialDelayS": 1800,
-    "autoUpgradeIntervalH": 12,
-    "upgradeToPreReleases": false,
-    "keepTemporariesH": 24,
-    "cacheIgnoredFiles": false,
-    "progressUpdateIntervalS": 5,
-    "limitBandwidthInLan": false,
-    "minHomeDiskFree": {
-      "value": 1,
-      "unit": "%"
+    \(dqglobalAnnounceEnabled\(dq: true,
+    \(dqlocalAnnounceEnabled\(dq: true,
+    \(dqlocalAnnouncePort\(dq: 21027,
+    \(dqlocalAnnounceMCAddr\(dq: \(dq[ff12::8384]:21027\(dq,
+    \(dqmaxSendKbps\(dq: 0,
+    \(dqmaxRecvKbps\(dq: 0,
+    \(dqreconnectionIntervalS\(dq: 60,
+    \(dqrelaysEnabled\(dq: true,
+    \(dqrelayReconnectIntervalM\(dq: 10,
+    \(dqstartBrowser\(dq: true,
+    \(dqnatEnabled\(dq: true,
+    \(dqnatLeaseMinutes\(dq: 60,
+    \(dqnatRenewalMinutes\(dq: 30,
+    \(dqnatTimeoutSeconds\(dq: 10,
+    \(dqurAccepted\(dq: 0,
+    \(dqurSeen\(dq: 0,
+    \(dqurUniqueId\(dq: \(dq...\(dq,
+    \(dqurURL\(dq: \(dqhttps://data.syncthing.net/newdata\(dq,
+    \(dqurPostInsecurely\(dq: false,
+    \(dqurInitialDelayS\(dq: 1800,
+    \(dqautoUpgradeIntervalH\(dq: 12,
+    \(dqupgradeToPreReleases\(dq: false,
+    \(dqkeepTemporariesH\(dq: 24,
+    \(dqcacheIgnoredFiles\(dq: false,
+    \(dqprogressUpdateIntervalS\(dq: 5,
+    \(dqlimitBandwidthInLan\(dq: false,
+    \(dqminHomeDiskFree\(dq: {
+      \(dqvalue\(dq: 1,
+      \(dqunit\(dq: \(dq%\(dq
     },
-    "releasesURL": "https://upgrades.syncthing.net/meta.json",
-    "alwaysLocalNets": [],
-    "overwriteRemoteDeviceNamesOnConnect": false,
-    "tempIndexMinBlocks": 10,
-    "unackedNotificationIDs": [
-      "authenticationUserAndPassword"
+    \(dqreleasesURL\(dq: \(dqhttps://upgrades.syncthing.net/meta.json\(dq,
+    \(dqalwaysLocalNets\(dq: [],
+    \(dqoverwriteRemoteDeviceNamesOnConnect\(dq: false,
+    \(dqtempIndexMinBlocks\(dq: 10,
+    \(dqunackedNotificationIDs\(dq: [
+      \(dqauthenticationUserAndPassword\(dq
     ],
-    "trafficClass": 0,
-    "setLowPriority": true,
-    "maxFolderConcurrency": 0,
-    "crURL": "https://crash.syncthing.net/newcrash",
-    "crashReportingEnabled": true,
-    "stunKeepaliveStartS": 180,
-    "stunKeepaliveMinS": 20,
-    "stunServers": [
-      "default"
+    \(dqtrafficClass\(dq: 0,
+    \(dqsetLowPriority\(dq: true,
+    \(dqmaxFolderConcurrency\(dq: 0,
+    \(dqcrURL\(dq: \(dqhttps://crash.syncthing.net/newcrash\(dq,
+    \(dqcrashReportingEnabled\(dq: true,
+    \(dqstunKeepaliveStartS\(dq: 180,
+    \(dqstunKeepaliveMinS\(dq: 20,
+    \(dqstunServers\(dq: [
+      \(dqdefault\(dq
     ],
-    "databaseTuning": "auto",
-    "maxConcurrentIncomingRequestKiB": 0,
-    "announceLANAddresses": true,
-    "sendFullIndexOnUpgrade": false,
-    "featureFlags": [],
-    "connectionLimitEnough": 0,
-    "connectionLimitMax": 0,
-    "insecureAllowOldTLSVersions": false
+    \(dqdatabaseTuning\(dq: \(dqauto\(dq,
+    \(dqmaxConcurrentIncomingRequestKiB\(dq: 0,
+    \(dqannounceLANAddresses\(dq: true,
+    \(dqsendFullIndexOnUpgrade\(dq: false,
+    \(dqfeatureFlags\(dq: [],
+    \(dqconnectionLimitEnough\(dq: 0,
+    \(dqconnectionLimitMax\(dq: 0,
+    \(dqinsecureAllowOldTLSVersions\(dq: false
   },
-  "remoteIgnoredDevices": [
+  \(dqremoteIgnoredDevices\(dq: [
     {
-      "time": "2022\-01\-09T20:02:01Z",
-      "deviceID": "...",
-      "name": "...",
-      "address": "192.168.0.20:22000"
+      \(dqtime\(dq: \(dq2022\-01\-09T20:02:01Z\(dq,
+      \(dqdeviceID\(dq: \(dq...\(dq,
+      \(dqname\(dq: \(dq...\(dq,
+      \(dqaddress\(dq: \(dq192.168.0.20:22000\(dq
     }
   ],
-  "defaults": {
-    "folder": {
-      "id": "",
-      "label": "",
-      "filesystemType": "basic",
-      "path": "~",
-      "type": "sendreceive",
-      "devices": [
+  \(dqdefaults\(dq: {
+    \(dqfolder\(dq: {
+      \(dqid\(dq: \(dq\(dq,
+      \(dqlabel\(dq: \(dq\(dq,
+      \(dqfilesystemType\(dq: \(dqbasic\(dq,
+      \(dqpath\(dq: \(dq~\(dq,
+      \(dqtype\(dq: \(dqsendreceive\(dq,
+      \(dqdevices\(dq: [
         {
-          "deviceID": "...",
-          "introducedBy": "",
-          "encryptionPassword": ""
+          \(dqdeviceID\(dq: \(dq...\(dq,
+          \(dqintroducedBy\(dq: \(dq\(dq,
+          \(dqencryptionPassword\(dq: \(dq\(dq
         }
       ],
-      "rescanIntervalS": 3600,
-      "fsWatcherEnabled": true,
-      "fsWatcherDelayS": 10,
-      "ignorePerms": false,
-      "autoNormalize": true,
-      "minDiskFree": {
-        "value": 1,
-        "unit": "%"
+      \(dqrescanIntervalS\(dq: 3600,
+      \(dqfsWatcherEnabled\(dq: true,
+      \(dqfsWatcherDelayS\(dq: 10,
+      \(dqignorePerms\(dq: false,
+      \(dqautoNormalize\(dq: true,
+      \(dqminDiskFree\(dq: {
+        \(dqvalue\(dq: 1,
+        \(dqunit\(dq: \(dq%\(dq
       },
-      "versioning": {
-        "type": "",
-        "params": {},
-        "cleanupIntervalS": 3600,
-        "fsPath": "",
-        "fsType": "basic"
+      \(dqversioning\(dq: {
+        \(dqtype\(dq: \(dq\(dq,
+        \(dqparams\(dq: {},
+        \(dqcleanupIntervalS\(dq: 3600,
+        \(dqfsPath\(dq: \(dq\(dq,
+        \(dqfsType\(dq: \(dqbasic\(dq
       },
-      "copiers": 0,
-      "pullerMaxPendingKiB": 0,
-      "hashers": 0,
-      "order": "random",
-      "ignoreDelete": false,
-      "scanProgressIntervalS": 0,
-      "pullerPauseS": 0,
-      "maxConflicts": 10,
-      "disableSparseFiles": false,
-      "disableTempIndexes": false,
-      "paused": false,
-      "weakHashThresholdPct": 25,
-      "markerName": ".stfolder",
-      "copyOwnershipFromParent": false,
-      "modTimeWindowS": 0,
-      "maxConcurrentWrites": 2,
-      "disableFsync": false,
-      "blockPullOrder": "standard",
-      "copyRangeMethod": "standard",
-      "caseSensitiveFS": false,
-      "junctionsAsDirs": false
+      \(dqcopiers\(dq: 0,
+      \(dqpullerMaxPendingKiB\(dq: 0,
+      \(dqhashers\(dq: 0,
+      \(dqorder\(dq: \(dqrandom\(dq,
+      \(dqignoreDelete\(dq: false,
+      \(dqscanProgressIntervalS\(dq: 0,
+      \(dqpullerPauseS\(dq: 0,
+      \(dqmaxConflicts\(dq: 10,
+      \(dqdisableSparseFiles\(dq: false,
+      \(dqdisableTempIndexes\(dq: false,
+      \(dqpaused\(dq: false,
+      \(dqweakHashThresholdPct\(dq: 25,
+      \(dqmarkerName\(dq: \(dq.stfolder\(dq,
+      \(dqcopyOwnershipFromParent\(dq: false,
+      \(dqmodTimeWindowS\(dq: 0,
+      \(dqmaxConcurrentWrites\(dq: 2,
+      \(dqdisableFsync\(dq: false,
+      \(dqblockPullOrder\(dq: \(dqstandard\(dq,
+      \(dqcopyRangeMethod\(dq: \(dqstandard\(dq,
+      \(dqcaseSensitiveFS\(dq: false,
+      \(dqjunctionsAsDirs\(dq: false
     },
-    "device": {
-      "deviceID": "",
-      "name": "",
-      "addresses": [
-        "dynamic"
+    \(dqdevice\(dq: {
+      \(dqdeviceID\(dq: \(dq\(dq,
+      \(dqname\(dq: \(dq\(dq,
+      \(dqaddresses\(dq: [
+        \(dqdynamic\(dq
       ],
-      "compression": "metadata",
-      "certName": "",
-      "introducer": false,
-      "skipIntroductionRemovals": false,
-      "introducedBy": "",
-      "paused": false,
-      "allowedNetworks": [],
-      "autoAcceptFolders": false,
-      "maxSendKbps": 0,
-      "maxRecvKbps": 0,
-      "ignoredFolders": [],
-      "maxRequestKiB": 0,
-      "untrusted": false,
-      "remoteGUIPort": 0
+      \(dqcompression\(dq: \(dqmetadata\(dq,
+      \(dqcertName\(dq: \(dq\(dq,
+      \(dqintroducer\(dq: false,
+      \(dqskipIntroductionRemovals\(dq: false,
+      \(dqintroducedBy\(dq: \(dq\(dq,
+      \(dqpaused\(dq: false,
+      \(dqallowedNetworks\(dq: [],
+      \(dqautoAcceptFolders\(dq: false,
+      \(dqmaxSendKbps\(dq: 0,
+      \(dqmaxRecvKbps\(dq: 0,
+      \(dqignoredFolders\(dq: [],
+      \(dqmaxRequestKiB\(dq: 0,
+      \(dquntrusted\(dq: false,
+      \(dqremoteGUIPort\(dq: 0
     }
   }
 }
@@ -375,7 +375,7 @@ Returns the current configuration.
 .SS GET /rest/system/config/insync (DEPRECATED)
 .sp
 Deprecated since version v1.12.0: This endpoint still works as before but is deprecated. Use
-rest\-config\-insync instead.
+\fI\%/rest/config/restart\-required\fP instead.
 
 .sp
 Returns whether the config is in sync, i.e. whether the running
@@ -386,7 +386,7 @@ configuration is the same as that on disk.
 .nf
 .ft C
 {
-  "configInSync": true
+  \(dqconfigInSync\(dq: true
 }
 .ft P
 .fi
@@ -394,14 +394,14 @@ configuration is the same as that on disk.
 .UNINDENT
 .SS POST /rest/system/config (DEPRECATED)
 .sp
-Deprecated since version v1.12.0: This endpoint still works as before but is deprecated.  Use config
+Deprecated since version v1.12.0: This endpoint still works as before but is deprecated.  Use \fI\%Config Endpoints\fP
 instead.
 
 .sp
 Post the full contents of the configuration, in the same format as returned by
 the corresponding GET request. When posting the configuration succeeds,
 the posted configuration is immediately applied, except for changes that require a restart. Query
-rest\-config\-insync to check if a restart is required.
+\fI\%/rest/config/restart\-required\fP to check if a restart is required.
 .sp
 This endpoint is the main point to control Syncthing, even if the change only
 concerns a very small part of the config: The usual workflow is to get the
@@ -425,48 +425,48 @@ The connection types are \fBTCP (Client)\fP, \fBTCP (Server)\fP, \fBRelay (Clien
 .nf
 .ft C
 {
-  "connections": {
-    "DOVII4U\-SQEEESM\-VZ2CVTC\-CJM4YN5\-QNV7DCU\-5U3ASRL\-YVFG6TH\-W5DV5AA": {
-      "address": "",
-      "at": "0001\-01\-01T00:00:00Z",
-      "clientVersion": "",
-      "connected": false,
-      "inBytesTotal": 0,
-      "isLocal": false,
-      "outBytesTotal": 0,
-      "paused": false,
-      "startedAt": "0001\-01\-01T00:00:00Z",
-      "type": ""
+  \(dqconnections\(dq: {
+    \(dqDOVII4U\-SQEEESM\-VZ2CVTC\-CJM4YN5\-QNV7DCU\-5U3ASRL\-YVFG6TH\-W5DV5AA\(dq: {
+      \(dqaddress\(dq: \(dq\(dq,
+      \(dqat\(dq: \(dq0001\-01\-01T00:00:00Z\(dq,
+      \(dqclientVersion\(dq: \(dq\(dq,
+      \(dqconnected\(dq: false,
+      \(dqinBytesTotal\(dq: 0,
+      \(dqisLocal\(dq: false,
+      \(dqoutBytesTotal\(dq: 0,
+      \(dqpaused\(dq: false,
+      \(dqstartedAt\(dq: \(dq0001\-01\-01T00:00:00Z\(dq,
+      \(dqtype\(dq: \(dq\(dq
     },
-    "UYGDMA4\-TPHOFO5\-2VQYDCC\-7CWX7XW\-INZINQT\-LE4B42N\-4JUZTSM\-IWCSXA4": {
-      "address": "",
-      "at": "0001\-01\-01T00:00:00Z",
-      "clientVersion": "",
-      "connected": false,
-      "inBytesTotal": 0,
-      "isLocal": false,
-      "outBytesTotal": 0,
-      "paused": false,
-      "startedAt": "0001\-01\-01T00:00:00Z",
-      "type": ""
+    \(dqUYGDMA4\-TPHOFO5\-2VQYDCC\-7CWX7XW\-INZINQT\-LE4B42N\-4JUZTSM\-IWCSXA4\(dq: {
+      \(dqaddress\(dq: \(dq\(dq,
+      \(dqat\(dq: \(dq0001\-01\-01T00:00:00Z\(dq,
+      \(dqclientVersion\(dq: \(dq\(dq,
+      \(dqconnected\(dq: false,
+      \(dqinBytesTotal\(dq: 0,
+      \(dqisLocal\(dq: false,
+      \(dqoutBytesTotal\(dq: 0,
+      \(dqpaused\(dq: false,
+      \(dqstartedAt\(dq: \(dq0001\-01\-01T00:00:00Z\(dq,
+      \(dqtype\(dq: \(dq\(dq
     },
-    "YZJBJFX\-RDBL7WY\-6ZGKJ2D\-4MJB4E7\-ZATSDUY\-LD6Y3L3\-MLFUYWE\-AEMXJAC": {
-      "address": "127.0.0.1:22002",
-      "at": "2015\-11\-07T17:29:47.691548971+01:00",
-      "clientVersion": "v0.12.1",
-      "connected": true,
-      "inBytesTotal": 556,
-      "isLocal": true,
-      "outBytesTotal": 550,
-      "paused": false,
-      "startedAt": "2015\-11\-07T00:09:47Z",
-      "type": "TCP (Client)"
+    \(dqYZJBJFX\-RDBL7WY\-6ZGKJ2D\-4MJB4E7\-ZATSDUY\-LD6Y3L3\-MLFUYWE\-AEMXJAC\(dq: {
+      \(dqaddress\(dq: \(dq127.0.0.1:22002\(dq,
+      \(dqat\(dq: \(dq2015\-11\-07T17:29:47.691548971+01:00\(dq,
+      \(dqclientVersion\(dq: \(dqv0.12.1\(dq,
+      \(dqconnected\(dq: true,
+      \(dqinBytesTotal\(dq: 556,
+      \(dqisLocal\(dq: true,
+      \(dqoutBytesTotal\(dq: 550,
+      \(dqpaused\(dq: false,
+      \(dqstartedAt\(dq: \(dq2015\-11\-07T00:09:47Z\(dq,
+      \(dqtype\(dq: \(dqTCP (Client)\(dq
     }
   },
-  "total": {
-    "at": "2015\-11\-07T17:29:47.691637262+01:00",
-    "inBytesTotal": 1479,
-    "outBytesTotal": 1318
+  \(dqtotal\(dq: {
+    \(dqat\(dq: \(dq2015\-11\-07T17:29:47.691637262+01:00\(dq,
+    \(dqinBytesTotal\(dq: 1479,
+    \(dqoutBytesTotal\(dq: 1318
   }
 }
 .ft P
@@ -485,28 +485,28 @@ Returns the set of debug facilities and which of them are currently enabled.
 .nf
 .ft C
 {
-  "enabled": [
-    "beacon"
+  \(dqenabled\(dq: [
+    \(dqbeacon\(dq
   ],
-  "facilities": {
-    "beacon": "Multicast and broadcast discovery",
-    "config": "Configuration loading and saving",
-    "connections": "Connection handling",
-    "db": "The database layer",
-    "dialer": "Dialing connections",
-    "discover": "Remote device discovery",
-    "events": "Event generation and logging",
-    "http": "REST API",
-    "main": "Main package",
-    "model": "The root hub",
-    "protocol": "The BEP protocol",
-    "relay": "Relay connection handling",
-    "scanner": "File change detection and hashing",
-    "stats": "Persistent device and folder statistics",
-    "sync": "Mutexes",
-    "upgrade": "Binary upgrades",
-    "upnp": "UPnP discovery and port mapping",
-    "versioner": "File versioning"
+  \(dqfacilities\(dq: {
+    \(dqbeacon\(dq: \(dqMulticast and broadcast discovery\(dq,
+    \(dqconfig\(dq: \(dqConfiguration loading and saving\(dq,
+    \(dqconnections\(dq: \(dqConnection handling\(dq,
+    \(dqdb\(dq: \(dqThe database layer\(dq,
+    \(dqdialer\(dq: \(dqDialing connections\(dq,
+    \(dqdiscover\(dq: \(dqRemote device discovery\(dq,
+    \(dqevents\(dq: \(dqEvent generation and logging\(dq,
+    \(dqhttp\(dq: \(dqREST API\(dq,
+    \(dqmain\(dq: \(dqMain package\(dq,
+    \(dqmodel\(dq: \(dqThe root hub\(dq,
+    \(dqprotocol\(dq: \(dqThe BEP protocol\(dq,
+    \(dqrelay\(dq: \(dqRelay connection handling\(dq,
+    \(dqscanner\(dq: \(dqFile change detection and hashing\(dq,
+    \(dqstats\(dq: \(dqPersistent device and folder statistics\(dq,
+    \(dqsync\(dq: \(dqMutexes\(dq,
+    \(dqupgrade\(dq: \(dqBinary upgrades\(dq,
+    \(dqupnp\(dq: \(dqUPnP discovery and port mapping\(dq,
+    \(dqversioner\(dq: \(dqFile versioning\(dq
   }
 }
 .ft P
@@ -541,8 +541,8 @@ Returns the contents of the local discovery cache.
 .nf
 .ft C
 {
-  "LGFPDIT7SKNNJVJZA4FC7QNCRKCE753K72BW5QD2FOZ7FRFEP57Q": [
-    "192.162.129.11:22000"
+  \(dqLGFPDIT7SKNNJVJZA4FC7QNCRKCE753K72BW5QD2FOZ7FRFEP57Q\(dq: [
+    \(dq192.162.129.11:22000\(dq
   ]
 }
 .ft P
@@ -567,7 +567,7 @@ the discovery cache.
 .ft C
 curl \-X POST http://127.0.0.1:8384/rest/system/discovery?device=LGFPDIT7SKNNJVJZA4FC7QNCRKCE753K72BW5QD2FOZ7FRFEP57Q\e&addr=192.162.129.11:22000
 # Or with the X\-API\-Key header:
-curl \-X POST \-\-header "X\-API\-Key: TcE28kVPdtJ8COws1JdM0b2nodj77WeQ" http://127.0.0.1:8384/rest/system/discovery?device=LGFPDIT7SKNNJVJZA4FC7QNCRKCE753K72BW5QD2FOZ7FRFEP57Q\e&addr=192.162.129.11:22000
+curl \-X POST \-\-header \(dqX\-API\-Key: TcE28kVPdtJ8COws1JdM0b2nodj77WeQ\(dq http://127.0.0.1:8384/rest/system/discovery?device=LGFPDIT7SKNNJVJZA4FC7QNCRKCE753K72BW5QD2FOZ7FRFEP57Q\e&addr=192.162.129.11:22000
 .ft P
 .fi
 .UNINDENT
@@ -591,10 +591,10 @@ Returns the list of recent errors.
 .nf
 .ft C
 {
-  "errors": [
+  \(dqerrors\(dq: [
     {
-      "when": "2014\-09\-18T12:59:26.549953186+02:00",
-      "message": "This is an error string"
+      \(dqwhen\(dq: \(dq2014\-09\-18T12:59:26.549953186+02:00\(dq,
+      \(dqmessage\(dq: \(dqThis is an error string\(dq
     }
   ]
 }
@@ -619,10 +619,10 @@ the results to message newer than the given timestamp in \fI\%RFC 3339\fP <\fBht
 .nf
 .ft C
 {
-  "messages": [
+  \(dqmessages\(dq: [
     {
-      "when": "2014\-09\-18T12:59:26.549953186+02:00",
-      "message": "This is a log entry"
+      \(dqwhen\(dq: \(dq2014\-09\-18T12:59:26.549953186+02:00\(dq,
+      \(dqmessage\(dq: \(dqThis is a log entry\(dq
     }
   ]
 }
@@ -646,21 +646,21 @@ and others.
 .nf
 .ft C
 {
-  "auditLog": "/home/user/.local/share/syncthing/audit\-${timestamp}.log",
-  "baseDir\-config": "/home/user/.config/syncthing",
-  "baseDir\-data": "/home/user/.local/share/syncthing",
-  "baseDir\-userHome": "/home/user",
-  "certFile": "/home/user/.config/syncthing/cert.pem",
-  "config": "/home/user/.config/syncthing/config.xml",
-  "csrfTokens": "/home/user/.config/syncthing/csrftokens.txt",
-  "database": "/home/user/.local/share/syncthing/index\-v0.14.0.db",
-  "defFolder": "/home/user/Sync",
-  "guiAssets": "/home/user/src/syncthing/gui",
-  "httpsCertFile": "/home/user/.config/syncthing/https\-cert.pem",
-  "httpsKeyFile": "/home/user/.config/syncthing/https\-key.pem",
-  "keyFile": "/home/user/.config/syncthing/key.pem",
-  "logFile": "\-",
-  "panicLog": "/home/user/.local/share/syncthing/panic\-${timestamp}.log"
+  \(dqauditLog\(dq: \(dq/home/user/.local/share/syncthing/audit\-${timestamp}.log\(dq,
+  \(dqbaseDir\-config\(dq: \(dq/home/user/.config/syncthing\(dq,
+  \(dqbaseDir\-data\(dq: \(dq/home/user/.local/share/syncthing\(dq,
+  \(dqbaseDir\-userHome\(dq: \(dq/home/user\(dq,
+  \(dqcertFile\(dq: \(dq/home/user/.config/syncthing/cert.pem\(dq,
+  \(dqconfig\(dq: \(dq/home/user/.config/syncthing/config.xml\(dq,
+  \(dqcsrfTokens\(dq: \(dq/home/user/.config/syncthing/csrftokens.txt\(dq,
+  \(dqdatabase\(dq: \(dq/home/user/.local/share/syncthing/index\-v0.14.0.db\(dq,
+  \(dqdefFolder\(dq: \(dq/home/user/Sync\(dq,
+  \(dqguiAssets\(dq: \(dq/home/user/src/syncthing/gui\(dq,
+  \(dqhttpsCertFile\(dq: \(dq/home/user/.config/syncthing/https\-cert.pem\(dq,
+  \(dqhttpsKeyFile\(dq: \(dq/home/user/.config/syncthing/https\-key.pem\(dq,
+  \(dqkeyFile\(dq: \(dq/home/user/.config/syncthing/key.pem\(dq,
+  \(dqlogFile\(dq: \(dq\-\(dq,
+  \(dqpanicLog\(dq: \(dq/home/user/.local/share/syncthing/panic\-${timestamp}.log\(dq
 }
 .ft P
 .fi
@@ -675,14 +675,14 @@ pauses all devices.  Returns status 200 and no content upon success, or status
 500 and a plain text error on failure.
 .SS GET /rest/system/ping
 .sp
-Returns a \fB{"ping": "pong"}\fP object.
+Returns a \fB{\(dqping\(dq: \(dqpong\(dq}\fP object.
 .INDENT 0.0
 .INDENT 3.5
 .sp
 .nf
 .ft C
 {
-  "ping": "pong"
+  \(dqping\(dq: \(dqpong\(dq
 }
 .ft P
 .fi
@@ -690,7 +690,7 @@ Returns a \fB{"ping": "pong"}\fP object.
 .UNINDENT
 .SS POST /rest/system/ping
 .sp
-Returns a \fB{"ping": "pong"}\fP object.
+Returns a \fB{\(dqping\(dq: \(dqpong\(dq}\fP object.
 .SS POST /rest/system/reset
 .sp
 Post with empty body to erase the current index database and restart
@@ -702,13 +702,13 @@ information for that folder will be erased:
 .sp
 .nf
 .ft C
-curl \-X POST \-H "X\-API\-Key: abc123" http://localhost:8384/rest/system/reset?folder=ab1c2\-def3g
+curl \-X POST \-H \(dqX\-API\-Key: abc123\(dq http://localhost:8384/rest/system/reset?folder=ab1c2\-def3g
 .ft P
 .fi
 .UNINDENT
 .UNINDENT
 .sp
-\fBCaution\fP: See \fB\-\-reset\-database\fP for \fB\&.stfolder\fP creation
+\fBCaution\fP: See \fI\%\-\-reset\-database\fP for \fB\&.stfolder\fP creation
 side\-effect and caution regarding mountpoints.
 .SS POST /rest/system/restart
 .sp
@@ -732,89 +732,89 @@ Returns information about current system status and resource usage. The CPU perc
 .nf
 .ft C
 {
-  "alloc": 30618136,
-  "connectionServiceStatus": {
-    "dynamic+https://relays.syncthing.net/endpoint": {
-      "error": null,
-      "lanAddresses": [
-        "relay://23.92.71.120:443/?id=53STGR7\-YBM6FCX\-PAZ2RHM\-YPY6OEJ\-WYHVZO7\-PCKQRCK\-PZLTP7T\-434XCAD&pingInterval=1m0s&networkTimeout=2m0s&sessionLimitBps=0&globalLimitBps=0&statusAddr=:22070&providedBy=canton7"
+  \(dqalloc\(dq: 30618136,
+  \(dqconnectionServiceStatus\(dq: {
+    \(dqdynamic+https://relays.syncthing.net/endpoint\(dq: {
+      \(dqerror\(dq: null,
+      \(dqlanAddresses\(dq: [
+        \(dqrelay://23.92.71.120:443/?id=53STGR7\-YBM6FCX\-PAZ2RHM\-YPY6OEJ\-WYHVZO7\-PCKQRCK\-PZLTP7T\-434XCAD&pingInterval=1m0s&networkTimeout=2m0s&sessionLimitBps=0&globalLimitBps=0&statusAddr=:22070&providedBy=canton7\(dq
       ],
-      "wanAddresses": [
-        "relay://23.92.71.120:443/?id=53STGR7\-YBM6FCX\-PAZ2RHM\-YPY6OEJ\-WYHVZO7\-PCKQRCK\-PZLTP7T\-434XCAD&pingInterval=1m0s&networkTimeout=2m0s&sessionLimitBps=0&globalLimitBps=0&statusAddr=:22070&providedBy=canton7"
+      \(dqwanAddresses\(dq: [
+        \(dqrelay://23.92.71.120:443/?id=53STGR7\-YBM6FCX\-PAZ2RHM\-YPY6OEJ\-WYHVZO7\-PCKQRCK\-PZLTP7T\-434XCAD&pingInterval=1m0s&networkTimeout=2m0s&sessionLimitBps=0&globalLimitBps=0&statusAddr=:22070&providedBy=canton7\(dq
       ]
     },
-    "tcp://0.0.0.0:22000": {
-      "error": null,
-      "lanAddresses": [
-        "tcp://0.0.0.0:22000"
+    \(dqtcp://0.0.0.0:22000\(dq: {
+      \(dqerror\(dq: null,
+      \(dqlanAddresses\(dq: [
+        \(dqtcp://0.0.0.0:22000\(dq
       ],
-      "wanAddresses": [
-        "tcp://0.0.0.0:22000"
+      \(dqwanAddresses\(dq: [
+        \(dqtcp://0.0.0.0:22000\(dq
       ]
     }
   },
-  "cpuPercent": 0,
-  "discoveryEnabled": true,
-  "discoveryErrors": {
-    "global@https://discovery\-v4\-1.syncthing.net/v2/": "500 Internal Server Error",
-    "global@https://discovery\-v4\-2.syncthing.net/v2/": "Post https://discovery\-v4\-2.syncthing.net/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)",
-    "global@https://discovery\-v4\-3.syncthing.net/v2/": "Post https://discovery\-v4\-3.syncthing.net/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)",
-    "global@https://discovery\-v6\-1.syncthing.net/v2/": "Post https://discovery\-v6\-1.syncthing.net/v2/: dial tcp [2001:470:28:4d6::5]:443: connect: no route to host",
-    "global@https://discovery\-v6\-2.syncthing.net/v2/": "Post https://discovery\-v6\-2.syncthing.net/v2/: dial tcp [2604:a880:800:10::182:a001]:443: connect: no route to host",
-    "global@https://discovery\-v6\-3.syncthing.net/v2/": "Post https://discovery\-v6\-3.syncthing.net/v2/: dial tcp [2400:6180:0:d0::d9:d001]:443: connect: no route to host"
+  \(dqcpuPercent\(dq: 0,
+  \(dqdiscoveryEnabled\(dq: true,
+  \(dqdiscoveryErrors\(dq: {
+    \(dqglobal@https://discovery\-v4\-1.syncthing.net/v2/\(dq: \(dq500 Internal Server Error\(dq,
+    \(dqglobal@https://discovery\-v4\-2.syncthing.net/v2/\(dq: \(dqPost https://discovery\-v4\-2.syncthing.net/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)\(dq,
+    \(dqglobal@https://discovery\-v4\-3.syncthing.net/v2/\(dq: \(dqPost https://discovery\-v4\-3.syncthing.net/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)\(dq,
+    \(dqglobal@https://discovery\-v6\-1.syncthing.net/v2/\(dq: \(dqPost https://discovery\-v6\-1.syncthing.net/v2/: dial tcp [2001:470:28:4d6::5]:443: connect: no route to host\(dq,
+    \(dqglobal@https://discovery\-v6\-2.syncthing.net/v2/\(dq: \(dqPost https://discovery\-v6\-2.syncthing.net/v2/: dial tcp [2604:a880:800:10::182:a001]:443: connect: no route to host\(dq,
+    \(dqglobal@https://discovery\-v6\-3.syncthing.net/v2/\(dq: \(dqPost https://discovery\-v6\-3.syncthing.net/v2/: dial tcp [2400:6180:0:d0::d9:d001]:443: connect: no route to host\(dq
   },
-  "discoveryStatus": {
-    "IPv4 local": {
-      "error": null
+  \(dqdiscoveryStatus\(dq: {
+    \(dqIPv4 local\(dq: {
+      \(dqerror\(dq: null
     },
-    "IPv6 local": {
-      "error": null
+    \(dqIPv6 local\(dq: {
+      \(dqerror\(dq: null
     },
-    "global@https://discovery\-v4\-1.syncthing.net/v2/": {
-      "error": "500 Internal Server Error"
+    \(dqglobal@https://discovery\-v4\-1.syncthing.net/v2/\(dq: {
+      \(dqerror\(dq: \(dq500 Internal Server Error\(dq
     },
-    "global@https://discovery\-v4\-2.syncthing.net/v2/": {
-      "error": "Post https://discovery\-v4\-2.syncthing.net/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)"
+    \(dqglobal@https://discovery\-v4\-2.syncthing.net/v2/\(dq: {
+      \(dqerror\(dq: \(dqPost https://discovery\-v4\-2.syncthing.net/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)\(dq
     },
-    "global@https://discovery\-v4\-3.syncthing.net/v2/": {
-      "error": "Post https://discovery\-v4\-3.syncthing.net/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)"
+    \(dqglobal@https://discovery\-v4\-3.syncthing.net/v2/\(dq: {
+      \(dqerror\(dq: \(dqPost https://discovery\-v4\-3.syncthing.net/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)\(dq
     },
-    "global@https://discovery\-v6\-1.syncthing.net/v2/": {
-      "error": "Post https://discovery\-v6\-1.syncthing.net/v2/: dial tcp [2001:470:28:4d6::5]:443: connect: no route to host"
+    \(dqglobal@https://discovery\-v6\-1.syncthing.net/v2/\(dq: {
+      \(dqerror\(dq: \(dqPost https://discovery\-v6\-1.syncthing.net/v2/: dial tcp [2001:470:28:4d6::5]:443: connect: no route to host\(dq
     },
-    "global@https://discovery\-v6\-2.syncthing.net/v2/": {
-      "error": "Post https://discovery\-v6\-2.syncthing.net/v2/: dial tcp [2604:a880:800:10::182:a001]:443: connect: no route to host"
+    \(dqglobal@https://discovery\-v6\-2.syncthing.net/v2/\(dq: {
+      \(dqerror\(dq: \(dqPost https://discovery\-v6\-2.syncthing.net/v2/: dial tcp [2604:a880:800:10::182:a001]:443: connect: no route to host\(dq
     },
-    "global@https://discovery\-v6\-3.syncthing.net/v2/": {
-      "error": "Post https://discovery\-v6\-3.syncthing.net/v2/: dial tcp [2400:6180:0:d0::d9:d001]:443: connect: no route to host"
+    \(dqglobal@https://discovery\-v6\-3.syncthing.net/v2/\(dq: {
+      \(dqerror\(dq: \(dqPost https://discovery\-v6\-3.syncthing.net/v2/: dial tcp [2400:6180:0:d0::d9:d001]:443: connect: no route to host\(dq
     }
   },
-  "discoveryMethods": 8,
-  "goroutines": 49,
-  "lastDialStatus": {
-      "tcp://10.20.30.40": {
-        "when": "2019\-05\-16T07:41:23Z",
-        "error": "dial tcp 10.20.30.40:22000: i/o timeout"
+  \(dqdiscoveryMethods\(dq: 8,
+  \(dqgoroutines\(dq: 49,
+  \(dqlastDialStatus\(dq: {
+      \(dqtcp://10.20.30.40\(dq: {
+        \(dqwhen\(dq: \(dq2019\-05\-16T07:41:23Z\(dq,
+        \(dqerror\(dq: \(dqdial tcp 10.20.30.40:22000: i/o timeout\(dq
       },
-      "tcp://172.16.33.3:22000": {
-        "when": "2019\-05\-16T07:40:43Z",
-        "ok": true
+      \(dqtcp://172.16.33.3:22000\(dq: {
+        \(dqwhen\(dq: \(dq2019\-05\-16T07:40:43Z\(dq,
+        \(dqok\(dq: true
       },
-      "tcp://83.233.120.221:22000": {
-        "when": "2019\-05\-16T07:41:13Z",
-        "error": "dial tcp 83.233.120.221:22000: connect: connection refused"
+      \(dqtcp://83.233.120.221:22000\(dq: {
+        \(dqwhen\(dq: \(dq2019\-05\-16T07:41:13Z\(dq,
+        \(dqerror\(dq: \(dqdial tcp 83.233.120.221:22000: connect: connection refused\(dq
       }
   },
-  "myID": "P56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2",
-  "pathSeparator": "/",
-  "startTime": "2016\-06\-06T19:41:43.039284753+02:00",
-  "sys": 42092792,
-  "themes": [
-    "default",
-    "dark"
+  \(dqmyID\(dq: \(dqP56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2\(dq,
+  \(dqpathSeparator\(dq: \(dq/\(dq,
+  \(dqstartTime\(dq: \(dq2016\-06\-06T19:41:43.039284753+02:00\(dq,
+  \(dqsys\(dq: 42092792,
+  \(dqthemes\(dq: [
+    \(dqdefault\(dq,
+    \(dqdark\(dq
   ],
-  "tilde": "/Users/jb",
-  "uptime": 2635
+  \(dqtilde\(dq: \(dq/Users/jb\(dq,
+  \(dquptime\(dq: 2635
 }
 .ft P
 .fi
@@ -823,7 +823,7 @@ Returns information about current system status and resource usage. The CPU perc
 .sp
 New in version 1.2.0: The \fBlastDialStatus\fP dictionary contains the last error (or \fBnull\fP for
 success) for each peer address that Syncthing has attempted to contact.
-The \fBconnectionServiceStatus\fP entries gained \fB"error": null\fP
+The \fBconnectionServiceStatus\fP entries gained \fB\(dqerror\(dq: null\fP
 attributes where previously there would be no \fBerror\fP attribute at all
 in the success case.
 
@@ -845,10 +845,10 @@ newest version and upgrade possibility.
 .nf
 .ft C
 {
-  "latest": "v0.14.47",
-  "majorNewer": false,
-  "newer": true,
-  "running": "v0.14.46"
+  \(dqlatest\(dq: \(dqv0.14.47\(dq,
+  \(dqmajorNewer\(dq: false,
+  \(dqnewer\(dq: true,
+  \(dqrunning\(dq: \(dqv0.14.46\(dq
 }
 .ft P
 .fi
@@ -867,10 +867,10 @@ Returns the current Syncthing version information.
 .nf
 .ft C
 {
-  "arch": "amd64",
-  "longVersion": "syncthing v0.10.27+3\-gea8c3de (go1.4 darwin\-amd64 default) jb@syno 2015\-03\-16 11:01:29 UTC",
-  "os": "darwin",
-  "version": "v0.10.27+3\-gea8c3de"
+  \(dqarch\(dq: \(dqamd64\(dq,
+  \(dqlongVersion\(dq: \(dqsyncthing v0.10.27+3\-gea8c3de (go1.4 darwin\-amd64 default) jb@syno 2015\-03\-16 11:01:29 UTC\(dq,
+  \(dqos\(dq: \(dqdarwin\(dq,
+  \(dqversion\(dq: \(dqv0.10.27+3\-gea8c3de\(dq
 }
 .ft P
 .fi
@@ -882,7 +882,7 @@ Returns the current Syncthing version information.
 New in version 1.12.0.
 
 .sp
-These endpoints facilitate access and modification of the configuration in a granular way. Config sent to the endpoints must be in the
+These endpoints facilitate access and modification of the \fI\%configuration\fP in a granular way. Config sent to the endpoints must be in the
 same format as returned by the corresponding GET request. When posting the
 configuration succeeds, the posted configuration is immediately applied, except
 for changes that require a restart. Query \fI\%/rest/config/restart\-required\fP to check if
@@ -892,7 +892,7 @@ For all endpoints supporting \fBPATCH\fP, it takes the existing config and
 unmarshals the given JSON object on top of it. This means all child objects will
 replace the existing objects, not extend them. For example for
 \fBRawListenAddresses\fP in options, which is an array of strings, sending
-\fB{RawListenAddresses: ["tcp://10.0.0.2"]}\fP will replace all existing listen
+\fB{RawListenAddresses: [\(dqtcp://10.0.0.2\(dq]}\fP will replace all existing listen
 addresses.
 .SS /rest/config
 .sp
@@ -940,24 +940,24 @@ New in version 1.18.0.
 .sp
 Remove records about a pending remote device which tried to connect.  Valid
 values for the \fBdevice\fP parameter are those from the corresponding
-cluster\-pending\-devices\-get endpoint.
+\fI\%GET /rest/cluster/pending/devices\fP endpoint.
 .INDENT 0.0
 .INDENT 3.5
 .sp
 .nf
 .ft C
-$ curl \-X DELETE \-H "X\-API\-Key: abc123" http://localhost:8384/rest/cluster/pending/devices?device=P56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2
+$ curl \-X DELETE \-H \(dqX\-API\-Key: abc123\(dq http://localhost:8384/rest/cluster/pending/devices?device=P56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2
 .ft P
 .fi
 .UNINDENT
 .UNINDENT
 .sp
 Returns status 200 and no content upon success, or status 500 and a
-plain text error on failure.  A /events/pendingdeviceschanged
+plain text error on failure.  A \fI\%PendingDevicesChanged\fP
 event will be generated in response.
 .sp
 For a more permanent effect, also for future connections from the same
-device ID, the device should be ignored in the configuration instead.
+device ID, the device should be ignored in the \fI\%configuration\fP instead.
 .SS GET /rest/cluster/pending/devices
 .sp
 New in version 1.13.0.
@@ -971,10 +971,10 @@ configured in our instance.
 .nf
 .ft C
 {
-  "P56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2": {
-    "time": "2020\-03\-18T11:43:07Z",
-    "name": "Friend Joe",
-    "address": "192.168.1.2:22000"
+  \(dqP56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2\(dq: {
+    \(dqtime\(dq: \(dq2020\-03\-18T11:43:07Z\(dq,
+    \(dqname\(dq: \(dqFriend Joe\(dq,
+    \(dqaddress\(dq: \(dq192.168.1.2:22000\(dq
   }
 }
 .ft P
@@ -988,7 +988,7 @@ New in version 1.18.0.
 .sp
 Remove records about a pending folder announced from a remote device.  Valid
 values for the \fBfolder\fP and \fBdevice\fP parameters are those from the
-corresponding cluster\-pending\-folders\-get endpoint.  The \fBdevice\fP
+corresponding \fI\%GET /rest/cluster/pending/folders\fP endpoint.  The \fBdevice\fP
 parameter is optional and affects announcements of this folder from the given
 device, or from \fIany\fP device if omitted.
 .INDENT 0.0
@@ -996,18 +996,18 @@ device, or from \fIany\fP device if omitted.
 .sp
 .nf
 .ft C
-$ curl \-X DELETE \-H "X\-API\-Key: abc123" http://localhost:8384/rest/cluster/pending/folders?folder=cpkn4\-57ysy&device=P56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2
+$ curl \-X DELETE \-H \(dqX\-API\-Key: abc123\(dq http://localhost:8384/rest/cluster/pending/folders?folder=cpkn4\-57ysy&device=P56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2
 .ft P
 .fi
 .UNINDENT
 .UNINDENT
 .sp
 Returns status 200 and no content upon success, or status 500 and a plain text
-error on failure.  A /events/pendingfolderschanged event will be
+error on failure.  A \fI\%PendingFoldersChanged\fP event will be
 generated in response.
 .sp
 For a more permanent effect, also for future announcements of the same folder
-ID, the folder should be ignored in the configuration
+ID, the folder should be ignored in the \fI\%configuration\fP
 instead.
 .SS GET /rest/cluster/pending/folders
 .sp
@@ -1024,29 +1024,29 @@ Other offering devices are also omitted from the result.
 .nf
 .ft C
 {
-  "cpkn4\-57ysy": {
-    "offeredBy": {
-      "P56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2": {
-        "time": "2020\-03\-18T11:43:07Z",
-        "label": "Joe\(aqs folder",
-        "receiveEncrypted": true,
-        "remoteEncrypted": false
+  \(dqcpkn4\-57ysy\(dq: {
+    \(dqofferedBy\(dq: {
+      \(dqP56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2\(dq: {
+        \(dqtime\(dq: \(dq2020\-03\-18T11:43:07Z\(dq,
+        \(dqlabel\(dq: \(dqJoe\(aqs folder\(dq,
+        \(dqreceiveEncrypted\(dq: true,
+        \(dqremoteEncrypted\(dq: false
       },
-      "DOVII4U\-SQEEESM\-VZ2CVTC\-CJM4YN5\-QNV7DCU\-5U3ASRL\-YVFG6TH\-W5DV5AA": {
-        "time": "2020\-03\-01T10:12:13Z",
-        "label": "Jane\(aqs and Joe\(aqs folder",
-        "receiveEncrypted": false,
-        "remoteEncrypted": false
+      \(dqDOVII4U\-SQEEESM\-VZ2CVTC\-CJM4YN5\-QNV7DCU\-5U3ASRL\-YVFG6TH\-W5DV5AA\(dq: {
+        \(dqtime\(dq: \(dq2020\-03\-01T10:12:13Z\(dq,
+        \(dqlabel\(dq: \(dqJane\(aqs and Joe\(aqs folder\(dq,
+        \(dqreceiveEncrypted\(dq: false,
+        \(dqremoteEncrypted\(dq: false
       }
     }
   },
-  "abcde\-fghij": {
-    "offeredBy": {
-      "P56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2": {
-        "time": "2020\-03\-18T11:43:07Z",
-        "label": "MyPics",
-        "receiveEncrypted": false,
-        "remoteEncrypted": false
+  \(dqabcde\-fghij\(dq: {
+    \(dqofferedBy\(dq: {
+      \(dqP56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2\(dq: {
+        \(dqtime\(dq: \(dq2020\-03\-18T11:43:07Z\(dq,
+        \(dqlabel\(dq: \(dqMyPics\(dq,
+        \(dqreceiveEncrypted\(dq: false,
+        \(dqremoteEncrypted\(dq: false
       }
     }
   }
@@ -1066,22 +1066,22 @@ New in version 0.14.53.
 Takes one mandatory parameter, \fBfolder\fP, and returns the list of errors
 encountered during scanning or pulling.
 .sp
-The results can be paginated using the common pagination parameters\&.
+The results can be paginated using the \fI\%common pagination parameters\fP\&.
 .INDENT 0.0
 .INDENT 3.5
 .sp
 .nf
 .ft C
 {
-  "folder": "nnhic\-sxuae",
-  "errors": [
+  \(dqfolder\(dq: \(dqnnhic\-sxuae\(dq,
+  \(dqerrors\(dq: [
     {
-      "path": "noperm.txt",
-      "error": "hashing: open /path/to/folder/noperm.txt: permission denied"
+      \(dqpath\(dq: \(dqnoperm.txt\(dq,
+      \(dqerror\(dq: \(dqhashing: open /path/to/folder/noperm.txt: permission denied\(dq
     }
   ],
-  "page": 1,
-  "perpage": 100
+  \(dqpage\(dq: 1,
+  \(dqperpage\(dq: 100
 }
 .ft P
 .fi
@@ -1090,7 +1090,7 @@ The results can be paginated using the common pagination parameters\&.
 .SS GET /rest/folder/pullerrors (DEPRECATED)
 .sp
 Deprecated since version v0.14.53: This endpoint still works as before but is deprecated.  Use
-folder\-errors\-get instead, which returns the same information.
+\fI\%GET /rest/folder/errors\fP instead, which returns the same information.
 .sp
 See \fI\%https://github.com/syncthing/syncthing/commit/d510e3cca3d5caae42121fa206b3decc981ae59e\fP
 
@@ -1101,7 +1101,7 @@ New in version 0.14.44.
 .sp
 Takes one mandatory parameter, \fBfolder\fP, and returns the list of archived
 files that could be recovered.  How many versions are available depends on the
-/users/versioning configuration.  Each entry specifies when the file
+\fI\%File Versioning\fP configuration.  Each entry specifies when the file
 version was archived as the \fBversionTime\fP, the \fBmodTime\fP when it was last
 modified before being archived, and the size in bytes.
 .INDENT 0.0
@@ -1110,30 +1110,30 @@ modified before being archived, and the size in bytes.
 .nf
 .ft C
 {
-  "dir1/dir2/bar": [
+  \(dqdir1/dir2/bar\(dq: [
     {
-      "versionTime": "2022\-02\-06T20:44:12+01:00",
-      "modTime": "2021\-01\-14T13:21:22+01:00",
-      "size": 4
+      \(dqversionTime\(dq: \(dq2022\-02\-06T20:44:12+01:00\(dq,
+      \(dqmodTime\(dq: \(dq2021\-01\-14T13:21:22+01:00\(dq,
+      \(dqsize\(dq: 4
     }
   ],
-  "baz": [
+  \(dqbaz\(dq: [
     {
-      "versionTime": "2022\-02\-06T20:44:20+01:00",
-      "modTime": "2021\-01\-14T13:23:49+01:00",
-      "size": 4
+      \(dqversionTime\(dq: \(dq2022\-02\-06T20:44:20+01:00\(dq,
+      \(dqmodTime\(dq: \(dq2021\-01\-14T13:23:49+01:00\(dq,
+      \(dqsize\(dq: 4
     }
   ],
-  "foo": [
+  \(dqfoo\(dq: [
     {
-      "versionTime": "2022\-02\-06T20:55:31+01:00",
-      "modTime": "2022\-02\-06T20:44:13+01:00",
-      "size": 4
+      \(dqversionTime\(dq: \(dq2022\-02\-06T20:55:31+01:00\(dq,
+      \(dqmodTime\(dq: \(dq2022\-02\-06T20:44:13+01:00\(dq,
+      \(dqsize\(dq: 4
     },
     {
-      "versionTime": "2022\-02\-06T20:44:20+01:00",
-      "modTime": "2021\-01\-14T13:21:16+01:00",
-      "size": 4
+      \(dqversionTime\(dq: \(dq2022\-02\-06T20:44:20+01:00\(dq,
+      \(dqmodTime\(dq: \(dq2021\-01\-14T13:21:16+01:00\(dq,
+      \(dqsize\(dq: 4
     }
   ]
 }
@@ -1146,7 +1146,7 @@ modified before being archived, and the size in bytes.
 Restore archived versions of a given set of files.  Expects an object with
 attributes named after the relative file paths, with timestamps as values
 matching valid \fBversionTime\fP entries in the corresponding
-folder\-versions\-get response object.
+\fI\%GET /rest/folder/versions\fP response object.
 .sp
 Takes the mandatory parameter \fBfolder\fP (folder ID).  Returns an object
 containing any error messages that occurred during restoration of the file, with
@@ -1157,8 +1157,8 @@ the file path as attribute name.
 .nf
 .ft C
 curl \-X POST \-H X\-API\-key:... http://127.0.0.1:8384/rest/folder/versions?folder=default \-d \(aq{
-  "dir1/dir2/bar": "2022\-02\-06T20:44:12+01:00",
-  "baz": "2022\-02\-06T20:44:20+01:00"
+  \(dqdir1/dir2/bar\(dq: \(dq2022\-02\-06T20:44:12+01:00\(dq,
+  \(dqbaz\(dq: \(dq2022\-02\-06T20:44:20+01:00\(dq
 }\(aq
 .ft P
 .fi
@@ -1185,48 +1185,48 @@ start building the structure.
 $ curl \-s http://localhost:8384/rest/db/browse?folder=j663y\-3ct3e&prefix=DCIM&levels=2
 [
     {
-        "modTime" : "2020\-10\-02T23:48:52.076996974+02:00",
-        "name" : "100ANDRO",
-        "size" : 128,
-        "type" : "FILE_INFO_TYPE_DIRECTORY"
+        \(dqmodTime\(dq : \(dq2020\-10\-02T23:48:52.076996974+02:00\(dq,
+        \(dqname\(dq : \(dq100ANDRO\(dq,
+        \(dqsize\(dq : 128,
+        \(dqtype\(dq : \(dqFILE_INFO_TYPE_DIRECTORY\(dq
     },
     {
-        "children" : [
+        \(dqchildren\(dq : [
             {
-                "modTime" : "2020\-12\-16T23:31:34.5009668+01:00",
-                "name" : "IMG_20201114_124821.jpg",
-                "size" : 10682189,
-                "type" : "FILE_INFO_TYPE_FILE"
+                \(dqmodTime\(dq : \(dq2020\-12\-16T23:31:34.5009668+01:00\(dq,
+                \(dqname\(dq : \(dqIMG_20201114_124821.jpg\(dq,
+                \(dqsize\(dq : 10682189,
+                \(dqtype\(dq : \(dqFILE_INFO_TYPE_FILE\(dq
             },
             {
-                "modTime" : "2020\-12\-16T23:31:35.0106367+01:00",
-                "name" : "IMG_20201213_122451.jpg",
-                "size" : 7936351,
-                "type" : "FILE_INFO_TYPE_FILE"
+                \(dqmodTime\(dq : \(dq2020\-12\-16T23:31:35.0106367+01:00\(dq,
+                \(dqname\(dq : \(dqIMG_20201213_122451.jpg\(dq,
+                \(dqsize\(dq : 7936351,
+                \(dqtype\(dq : \(dqFILE_INFO_TYPE_FILE\(dq
             },
             {
-                "modTime" : "2020\-12\-13T12:25:05.017097469+01:00",
-                "name" : "IMG_20201213_122504.jpg",
-                "size" : 8406507,
-                "type" : "FILE_INFO_TYPE_FILE"
+                \(dqmodTime\(dq : \(dq2020\-12\-13T12:25:05.017097469+01:00\(dq,
+                \(dqname\(dq : \(dqIMG_20201213_122504.jpg\(dq,
+                \(dqsize\(dq : 8406507,
+                \(dqtype\(dq : \(dqFILE_INFO_TYPE_FILE\(dq
             },
             {
-                "modTime" : "2020\-12\-13T12:25:06.127097469+01:00",
-                "name" : "IMG_20201213_122505.jpg",
-                "size" : 8381931,
-                "type" : "FILE_INFO_TYPE_FILE"
+                \(dqmodTime\(dq : \(dq2020\-12\-13T12:25:06.127097469+01:00\(dq,
+                \(dqname\(dq : \(dqIMG_20201213_122505.jpg\(dq,
+                \(dqsize\(dq : 8381931,
+                \(dqtype\(dq : \(dqFILE_INFO_TYPE_FILE\(dq
             },
             {
-                "modTime" : "2020\-12\-13T12:53:29.707298401+01:00",
-                "name" : "IMG_20201213_125329.jpg",
-                "size" : 4388331,
-                "type" : "FILE_INFO_TYPE_FILE"
+                \(dqmodTime\(dq : \(dq2020\-12\-13T12:53:29.707298401+01:00\(dq,
+                \(dqname\(dq : \(dqIMG_20201213_125329.jpg\(dq,
+                \(dqsize\(dq : 4388331,
+                \(dqtype\(dq : \(dqFILE_INFO_TYPE_FILE\(dq
             },
         ],
-        "modTime" : "2020\-10\-09T13:04:42.4410738+02:00",
-        "name" : "Camera",
-        "size" : 128,
-        "type" : "FILE_INFO_TYPE_DIRECTORY"
+        \(dqmodTime\(dq : \(dq2020\-10\-09T13:04:42.4410738+02:00\(dq,
+        \(dqname\(dq : \(dqCamera\(dq,
+        \(dqsize\(dq : 128,
+        \(dqtype\(dq : \(dqFILE_INFO_TYPE_DIRECTORY\(dq
     },
 ]
 .ft P
@@ -1311,14 +1311,14 @@ Aggregated completion status for all folders on the local device:
 .nf
 .ft C
 {
-  "completion": 99.9937565835,
-  "globalBytes": 156793013575,
-  "needBytes": 9789241,
-  "globalItems": 7823,
-  "needItems": 412,
-  "needDeletes": 0,
-  "remoteState": "valid",
-  "sequence": 12
+  \(dqcompletion\(dq: 99.9937565835,
+  \(dqglobalBytes\(dq: 156793013575,
+  \(dqneedBytes\(dq: 9789241,
+  \(dqglobalItems\(dq: 7823,
+  \(dqneedItems\(dq: 412,
+  \(dqneedDeletes\(dq: 0,
+  \(dqremoteState\(dq: \(dqvalid\(dq,
+  \(dqsequence\(dq: 12
 }
 .ft P
 .fi
@@ -1348,14 +1348,14 @@ respectively.
 .nf
 .ft C
 {
-  "availability": [
+  \(dqavailability\(dq: [
     {
-      "id": "ITZRNXE\-YNROGBZ\-HXTH5P7\-VK5NYE5\-QHRQGE2\-7JQ6VNJ\-KZUEDIU\-5PPR5AM",
-      "fromTemporary": false
+      \(dqid\(dq: \(dqITZRNXE\-YNROGBZ\-HXTH5P7\-VK5NYE5\-QHRQGE2\-7JQ6VNJ\-KZUEDIU\-5PPR5AM\(dq,
+      \(dqfromTemporary\(dq: false
     }
   ],
-  "global": { /* a file entry */ },
-  "local": { /* a file entry */ }
+  \(dqglobal\(dq: { /* a file entry */ },
+  \(dqlocal\(dq: { /* a file entry */ }
 }
 .ft P
 .fi
@@ -1370,31 +1370,31 @@ A file entry looks like this:
 .ft C
 {
   {
-    "deleted": false,
-    "ignored": false,
-    "inodeChange": "1970\-01\-01T01:00:00+01:00",
-    "invalid": false,
-    "localFlags": 0,
-    "modified": "2022\-09\-28T08:07:19.979723+02:00",
-    "modifiedBy": "523ITIE",
-    "mustRescan": false,
-    "name": "img",
-    "noPermissions": false,
-    "numBlocks": 0,
-    "permissions": "0755",
-    "platform": { /* platform specific data */ },
-    "sequence": 914,
-    "size": 128,
-    "type": "FILE_INFO_TYPE_DIRECTORY",
-    "version": [
-      "523ITIE:1664345275"
+    \(dqdeleted\(dq: false,
+    \(dqignored\(dq: false,
+    \(dqinodeChange\(dq: \(dq1970\-01\-01T01:00:00+01:00\(dq,
+    \(dqinvalid\(dq: false,
+    \(dqlocalFlags\(dq: 0,
+    \(dqmodified\(dq: \(dq2022\-09\-28T08:07:19.979723+02:00\(dq,
+    \(dqmodifiedBy\(dq: \(dq523ITIE\(dq,
+    \(dqmustRescan\(dq: false,
+    \(dqname\(dq: \(dqimg\(dq,
+    \(dqnoPermissions\(dq: false,
+    \(dqnumBlocks\(dq: 0,
+    \(dqpermissions\(dq: \(dq0755\(dq,
+    \(dqplatform\(dq: { /* platform specific data */ },
+    \(dqsequence\(dq: 914,
+    \(dqsize\(dq: 128,
+    \(dqtype\(dq: \(dqFILE_INFO_TYPE_DIRECTORY\(dq,
+    \(dqversion\(dq: [
+      \(dq523ITIE:1664345275\(dq
     ]
   },
-  "mtime": {
-    "err": null,
-    "value": {
-      "real": "0001\-01\-01T00:00:00Z",
-      "virtual": "0001\-01\-01T00:00:00Z"
+  \(dqmtime\(dq: {
+    \(dqerr\(dq: null,
+    \(dqvalue\(dq: {
+      \(dqreal\(dq: \(dq0001\-01\-01T00:00:00Z\(dq,
+      \(dqvirtual\(dq: \(dq0001\-01\-01T00:00:00Z\(dq
     }
   }
 }
@@ -1413,24 +1413,24 @@ attribute for macOS (“darwin”) looks as follows:
 .nf
 .ft C
 {
-  "darwin": {
-    "xattrs": [
+  \(dqdarwin\(dq: {
+    \(dqxattrs\(dq: [
       {
-        "name": "net.kastelo.xattrtest",
-        "value": "aGVsbG8="
+        \(dqname\(dq: \(dqnet.kastelo.xattrtest\(dq,
+        \(dqvalue\(dq: \(dqaGVsbG8=\(dq
       }
     ]
   },
-  "freebsd": null,
-  "linux": null,
-  "netbsd": null,
-  "unix": {
-    "gid": 20,
-    "groupName": "staff",
-    "ownerName": "jb",
-    "uid": 501
+  \(dqfreebsd\(dq: null,
+  \(dqlinux\(dq: null,
+  \(dqnetbsd\(dq: null,
+  \(dqunix\(dq: {
+    \(dqgid\(dq: 20,
+    \(dqgroupName\(dq: \(dqstaff\(dq,
+    \(dqownerName\(dq: \(dqjb\(dq,
+    \(dquid\(dq: 501
   },
-  "windows": null
+  \(dqwindows\(dq: null
 }
 .ft P
 .fi
@@ -1447,12 +1447,12 @@ provides a list of strings which represent globbing patterns described by gobwas
 .nf
 .ft C
 {
-  "ignore": [
-    "(?i)/Backups"
+  \(dqignore\(dq: [
+    \(dq(?i)/Backups\(dq
   ],
-  "expanded": [
-    "(?i)Backups",
-    "(?i)Backups/**"
+  \(dqexpanded\(dq: [
+    \(dq(?i)Backups\(dq,
+    \(dq(?i)Backups/**\(dq
   ]
 }
 .ft P
@@ -1461,7 +1461,7 @@ provides a list of strings which represent globbing patterns described by gobwas
 .UNINDENT
 .SS POST /rest/db/ignores
 .sp
-Expects a format similar to the output of db\-ignores\-get call, but only
+Expects a format similar to the output of \fI\%GET /rest/db/ignores\fP call, but only
 containing the \fBignore\fP field (\fBexpanded\fP field should be omitted).
 It takes one parameter, \fBfolder\fP, and either updates the content of
 the \fB\&.stignore\fP echoing it back as a response, or returns an error.
@@ -1473,29 +1473,29 @@ New in version 0.14.55.
 Takes one mandatory parameter, \fBfolder\fP, and returns the list of files which
 were changed locally in a receive\-only folder.  Thus they differ from the global
 state and could be reverted by pulling from remote devices again, see
-db\-revert\-post\&.
+\fI\%POST /rest/db/revert\fP\&.
 .sp
-The results can be paginated using the common pagination parameters\&.
+The results can be paginated using the \fI\%common pagination parameters\fP\&.
 .INDENT 0.0
 .INDENT 3.5
 .sp
 .nf
 .ft C
 {
-  "files": [
+  \(dqfiles\(dq: [
     {
-      "flags": "0755",
-      "sequence": 6,
-      "modified": "2015\-04\-20T23:06:12+09:00",
-      "name": "ls",
-      "size": 34640,
-      "version": [
-        "5157751870738175669:1"
+      \(dqflags\(dq: \(dq0755\(dq,
+      \(dqsequence\(dq: 6,
+      \(dqmodified\(dq: \(dq2015\-04\-20T23:06:12+09:00\(dq,
+      \(dqname\(dq: \(dqls\(dq,
+      \(dqsize\(dq: 34640,
+      \(dqversion\(dq: [
+        \(dq5157751870738175669:1\(dq
       ]
     }
   ],
-  "page": 1,
-  "perpage": 100
+  \(dqpage\(dq: 1,
+  \(dqperpage\(dq: 100
 }
 .ft P
 .fi
@@ -1514,7 +1514,7 @@ Use sparingly.
 Takes one mandatory parameter, \fBfolder\fP, and returns lists of files which are
 needed by this device in order for it to become in sync.
 .sp
-The results can be paginated using the common pagination parameters\&.  Pagination happens, across the union of all needed files,
+The results can be paginated using the \fI\%common pagination parameters\fP\&.  Pagination happens, across the union of all needed files,
 that is \- across all 3 sections of the response.  For example, given the current
 need state is as follows:
 .INDENT 0.0
@@ -1547,29 +1547,29 @@ attribute.
 .ft C
 {
   # Files currently being downloaded
-  "progress": [
+  \(dqprogress\(dq: [
     {
-      "flags": "0755",
-      "sequence": 6,
-      "modified": "2015\-04\-20T23:06:12+09:00",
-      "name": "ls",
-      "size": 34640,
-      "version": [
-        "5157751870738175669:1"
+      \(dqflags\(dq: \(dq0755\(dq,
+      \(dqsequence\(dq: 6,
+      \(dqmodified\(dq: \(dq2015\-04\-20T23:06:12+09:00\(dq,
+      \(dqname\(dq: \(dqls\(dq,
+      \(dqsize\(dq: 34640,
+      \(dqversion\(dq: [
+        \(dq5157751870738175669:1\(dq
       ]
     }
   ],
   # Files queued to be downloaded next (as per array order)
-  "queued": [
+  \(dqqueued\(dq: [
       ...
   ],
   # Files to be downloaded after all queued files will be downloaded.
   # This happens when we start downloading files, and new files get added while we are downloading.
-  "rest": [
+  \(dqrest\(dq: [
       ...
   ],
-  "page": 1,
-  "perpage": 100
+  \(dqpage\(dq: 1,
+  \(dqperpage\(dq: 100
 }
 .ft P
 .fi
@@ -1614,7 +1614,7 @@ curl \-X POST http://127.0.0.1:8384/rest/db/prio?folder=default&file=foo/bar
 .UNINDENT
 .UNINDENT
 .sp
-Response contains the same output as db\-need\-get\&.
+Response contains the same output as \fI\%GET /rest/db/need\fP\&.
 .SS GET /rest/db/remoteneed
 .sp
 New in version 0.14.43.
@@ -1624,27 +1624,27 @@ Takes the mandatory parameters \fBfolder\fP and \fBdevice\fP, and returns the li
 of files which are needed by that remote device in order for it to become in
 sync with the shared folder.
 .sp
-The results can be paginated using the common pagination parameters\&.
+The results can be paginated using the \fI\%common pagination parameters\fP\&.
 .INDENT 0.0
 .INDENT 3.5
 .sp
 .nf
 .ft C
 {
-  "files": [
+  \(dqfiles\(dq: [
     {
-      "flags": "0755",
-      "sequence": 6,
-      "modified": "2015\-04\-20T23:06:12+09:00",
-      "name": "ls",
-      "size": 34640,
-      "version": [
-        "5157751870738175669:1"
+      \(dqflags\(dq: \(dq0755\(dq,
+      \(dqsequence\(dq: 6,
+      \(dqmodified\(dq: \(dq2015\-04\-20T23:06:12+09:00\(dq,
+      \(dqname\(dq: \(dqls\(dq,
+      \(dqsize\(dq: 34640,
+      \(dqversion\(dq: [
+        \(dq5157751870738175669:1\(dq
       ]
     }
   ],
-  "page": 1,
-  "perpage": 100
+  \(dqpage\(dq: 1,
+  \(dqperpage\(dq: 100
 }
 .ft P
 .fi
@@ -1714,39 +1714,39 @@ Parameters: \fBfolder\fP, the ID of a folder.
 .nf
 .ft C
 {
-  "globalBytes": 0,
-  "globalDeleted": 0,
-  "globalDirectories": 0,
-  "globalFiles": 0,
-  "globalSymlinks": 0,
-  "globalTotalItems": 0,
-  "ignorePatterns": false,
-  "inSyncBytes": 0,
-  "inSyncFiles": 0,
-  "invalid": "",
-  "localBytes": 0,
-  "localDeleted": 0,
-  "localDirectories": 0,
-  "localFiles": 0,
-  "localSymlinks": 0,
-  "localTotalItems": 0,
-  "needBytes": 0,
-  "needDeletes": 0,
-  "needDirectories": 0,
-  "needFiles": 0,
-  "needSymlinks": 0,
-  "needTotalItems": 0,
-  "pullErrors": 0,
-  "receiveOnlyChangedBytes": 0,
-  "receiveOnlyChangedDeletes": 0,
-  "receiveOnlyChangedDirectories": 0,
-  "receiveOnlyChangedFiles": 0,
-  "receiveOnlyChangedSymlinks": 0,
-  "receiveOnlyTotalItems": 0,
-  "sequence": 0,
-  "state": "idle",
-  "stateChanged": "2018\-08\-08T07:04:57.301064781+02:00",
-  "version": 0
+  \(dqglobalBytes\(dq: 0,
+  \(dqglobalDeleted\(dq: 0,
+  \(dqglobalDirectories\(dq: 0,
+  \(dqglobalFiles\(dq: 0,
+  \(dqglobalSymlinks\(dq: 0,
+  \(dqglobalTotalItems\(dq: 0,
+  \(dqignorePatterns\(dq: false,
+  \(dqinSyncBytes\(dq: 0,
+  \(dqinSyncFiles\(dq: 0,
+  \(dqinvalid\(dq: \(dq\(dq,
+  \(dqlocalBytes\(dq: 0,
+  \(dqlocalDeleted\(dq: 0,
+  \(dqlocalDirectories\(dq: 0,
+  \(dqlocalFiles\(dq: 0,
+  \(dqlocalSymlinks\(dq: 0,
+  \(dqlocalTotalItems\(dq: 0,
+  \(dqneedBytes\(dq: 0,
+  \(dqneedDeletes\(dq: 0,
+  \(dqneedDirectories\(dq: 0,
+  \(dqneedFiles\(dq: 0,
+  \(dqneedSymlinks\(dq: 0,
+  \(dqneedTotalItems\(dq: 0,
+  \(dqpullErrors\(dq: 0,
+  \(dqreceiveOnlyChangedBytes\(dq: 0,
+  \(dqreceiveOnlyChangedDeletes\(dq: 0,
+  \(dqreceiveOnlyChangedDirectories\(dq: 0,
+  \(dqreceiveOnlyChangedFiles\(dq: 0,
+  \(dqreceiveOnlyChangedSymlinks\(dq: 0,
+  \(dqreceiveOnlyTotalItems\(dq: 0,
+  \(dqsequence\(dq: 0,
+  \(dqstate\(dq: \(dqidle\(dq,
+  \(dqstateChanged\(dq: \(dq2018\-08\-08T07:04:57.301064781+02:00\(dq,
+  \(dqversion\(dq: 0
 }
 .ft P
 .fi
@@ -1803,9 +1803,9 @@ To receive events, perform a HTTP GET of \fB/rest/events\fP\&.
 .sp
 To filter the event list, in effect creating a specific subscription for only
 the desired event types, add a parameter \fBevents=EventTypeA,EventTypeB,...\fP
-where the event types are any of the event\-types\&.  If no filter is
-specified, all events \fIexcept\fP /events/localchangedetected and
-/events/remotechangedetected are included.
+where the event types are any of the \fI\%Event Types\fP\&.  If no filter is
+specified, all events \fIexcept\fP \fI\%LocalChangeDetected\fP and
+\fI\%RemoteChangeDetected\fP are included.
 .sp
 The optional parameter \fBsince=<lastSeenID>\fP sets the ID of the last event
 you’ve already seen. Syncthing returns a JSON encoded array of event objects,
@@ -1827,7 +1827,7 @@ example: \fB/rest/events?since=0&limit=1\fP\&.
 .SS GET /rest/events/disk
 .sp
 This convenience endpoint provides the same event stream, but pre\-filtered to show
-only /events/localchangedetected and /events/remotechangedetected
+only \fI\%LocalChangeDetected\fP and \fI\%RemoteChangeDetected\fP
 event types.  The \fBevents\fP parameter is not used.
 .SH STATISTICS ENDPOINTS
 .SS GET /rest/stats/device
@@ -1841,9 +1841,9 @@ time the device was last seen and the last connection duration.
 .ft C
 $ curl \-s http://localhost:8384/rest/stats/device | json
 {
-  "P56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2": {
-    "lastSeen" : "2015\-04\-18T11:21:31.3256277+01:00"
-    "lastConnectionDurationS": 556335.421708141
+  \(dqP56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2\(dq: {
+    \(dqlastSeen\(dq : \(dq2015\-04\-18T11:21:31.3256277+01:00\(dq
+    \(dqlastConnectionDurationS\(dq: 556335.421708141
   }
 }
 .ft P
@@ -1860,11 +1860,11 @@ last scan time and the last synced file.
 .nf
 .ft C
 {
-  "folderid": {
-    "lastScan": "2016\-06\-02T13:28:01.288181412\-04:00",
-    "lastFile": {
-      "filename": "file/name",
-      "at": "2015\-04\-16T22:04:18.3066971+01:00"
+  \(dqfolderid\(dq: {
+    \(dqlastScan\(dq: \(dq2016\-06\-02T13:28:01.288181412\-04:00\(dq,
+    \(dqlastFile\(dq: {
+      \(dqfilename\(dq: \(dqfile/name\(dq,
+      \(dqat\(dq: \(dq2015\-04\-16T22:04:18.3066971+01:00\(dq
     }
   }
 }
@@ -1886,12 +1886,12 @@ either a valid device ID in modern format, or an error.
 .ft C
 $ curl \-s http://localhost:8384/rest/svc/deviceid?id=1234 | json
 {
-  "error": "device ID invalid: incorrect length"
+  \(dqerror\(dq: \(dqdevice ID invalid: incorrect length\(dq
 }
 
 $ curl \-s http://localhost:8384/rest/svc/deviceid?id=p56ioi7m\-\-zjnu2iq\-gdr\-eydm\-2mgtmgl3bxnpq6w5btbbz4tjxzwicq | json
 {
-  "id": "P56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2"
+  \(dqid\(dq: \(dqP56IOI7\-MZJNU2Y\-IQGDREY\-DM2MGTI\-MGL3BXN\-PQ6W5BM\-TBBZ4TJ\-XZWICQ2\(dq
 }
 .ft P
 .fi
@@ -1906,7 +1906,7 @@ the \fBAccept\-Language\fP header sent by the browser.
 .sp
 .nf
 .ft C
-["sv_sv","sv","en_us","en"]
+[\(dqsv_sv\(dq,\(dqsv\(dq,\(dqen_us\(dq,\(dqen\(dq]
 .ft P
 .fi
 .UNINDENT
@@ -1920,7 +1920,7 @@ Returns a strong random generated string (alphanumeric) of the specified length.
 .nf
 .ft C
 {
-  "random": "FdPaEaZQ56sXEKYNxpgF"
+  \(dqrandom\(dq: \(dqFdPaEaZQ56sXEKYNxpgF\(dq
 }
 .ft P
 .fi
@@ -1935,55 +1935,55 @@ Returns the data sent in the anonymous usage report.
 .nf
 .ft C
 {
-   "folderMaxMiB" : 0,
-   "platform" : "linux\-amd64",
-   "totMiB" : 0,
-   "longVersion" : "syncthing v0.12.2 \e"Beryllium Bedbug\e" (go1.4.3 linux\-amd64 default) unknown\-user@build2.syncthing.net 2015\-11\-09 13:23:26 UTC",
-   "upgradeAllowedManual" : true,
-   "totFiles" : 3,
-   "folderUses" : {
-      "ignorePerms" : 0,
-      "autoNormalize" : 0,
-      "sendonly" : 0,
-      "ignoreDelete" : 0
+   \(dqfolderMaxMiB\(dq : 0,
+   \(dqplatform\(dq : \(dqlinux\-amd64\(dq,
+   \(dqtotMiB\(dq : 0,
+   \(dqlongVersion\(dq : \(dqsyncthing v0.12.2 \e\(dqBeryllium Bedbug\e\(dq (go1.4.3 linux\-amd64 default) unknown\-user@build2.syncthing.net 2015\-11\-09 13:23:26 UTC\(dq,
+   \(dqupgradeAllowedManual\(dq : true,
+   \(dqtotFiles\(dq : 3,
+   \(dqfolderUses\(dq : {
+      \(dqignorePerms\(dq : 0,
+      \(dqautoNormalize\(dq : 0,
+      \(dqsendonly\(dq : 0,
+      \(dqignoreDelete\(dq : 0
    },
-   "memoryUsageMiB" : 13,
-   "version" : "v0.12.2",
-   "sha256Perf" : 27.28,
-   "numFolders" : 2,
-   "memorySize" : 1992,
-   "announce" : {
-      "defaultServersIP" : 0,
-      "otherServers" : 0,
-      "globalEnabled" : false,
-      "defaultServersDNS" : 1,
-      "localEnabled" : false
+   \(dqmemoryUsageMiB\(dq : 13,
+   \(dqversion\(dq : \(dqv0.12.2\(dq,
+   \(dqsha256Perf\(dq : 27.28,
+   \(dqnumFolders\(dq : 2,
+   \(dqmemorySize\(dq : 1992,
+   \(dqannounce\(dq : {
+      \(dqdefaultServersIP\(dq : 0,
+      \(dqotherServers\(dq : 0,
+      \(dqglobalEnabled\(dq : false,
+      \(dqdefaultServersDNS\(dq : 1,
+      \(dqlocalEnabled\(dq : false
    },
-   "usesRateLimit" : false,
-   "numCPU" : 2,
-   "uniqueID" : "",
-   "urVersion" : 2,
-   "rescanIntvs" : [
+   \(dqusesRateLimit\(dq : false,
+   \(dqnumCPU\(dq : 2,
+   \(dquniqueID\(dq : \(dq\(dq,
+   \(dqurVersion\(dq : 2,
+   \(dqrescanIntvs\(dq : [
       60,
       60
    ],
-   "numDevices" : 2,
-   "folderMaxFiles" : 3,
-   "relays" : {
-      "defaultServers" : 1,
-      "enabled" : true,
-      "otherServers" : 0
+   \(dqnumDevices\(dq : 2,
+   \(dqfolderMaxFiles\(dq : 3,
+   \(dqrelays\(dq : {
+      \(dqdefaultServers\(dq : 1,
+      \(dqenabled\(dq : true,
+      \(dqotherServers\(dq : 0
    },
-   "deviceUses" : {
-      "compressMetadata" : 1,
-      "customCertName" : 0,
-      "staticAddr" : 1,
-      "compressAlways" : 0,
-      "compressNever" : 1,
-      "introducer" : 0,
-      "dynamicAddr" : 1
+   \(dqdeviceUses\(dq : {
+      \(dqcompressMetadata\(dq : 1,
+      \(dqcustomCertName\(dq : 0,
+      \(dqstaticAddr\(dq : 1,
+      \(dqcompressAlways\(dq : 0,
+      \(dqcompressNever\(dq : 1,
+      \(dqintroducer\(dq : 0,
+      \(dqdynamicAddr\(dq : 1
    },
-   "upgradeAllowedAuto" : false
+   \(dqupgradeAllowedAuto\(dq : false
 }
 .ft P
 .fi
@@ -1992,7 +1992,7 @@ Returns the data sent in the anonymous usage report.
 .SH DEBUG ENDPOINTS
 .SS Debug Endpoints
 .sp
-These endpoints require the \fBgui.debugging\fP configuration option to
+These endpoints require the \fI\%gui.debugging\fP configuration option to
 be enabled and yield an access denied error code otherwise.
 .SS GET /rest/debug/peerCompletion
 .sp
@@ -2005,11 +2005,11 @@ time was spent generating the responses.
 .SS GET /rest/debug/cpuprof
 .sp
 Used to capture a profile of what Syncthing is doing on the CPU.  See
-/users/profiling\&.
+\fI\%Profiling\fP\&.
 .SS GET /rest/debug/heapprof
 .sp
 Used to capture a profile of what Syncthing is doing with the heap memory.  See
-/users/profiling\&.
+\fI\%Profiling\fP\&.
 .SS GET /rest/debug/support
 .sp
 Collects information about the running instance for troubleshooting purposes.
@@ -2025,27 +2025,27 @@ Shows diagnostics about a certain file in a shared folder.  Takes the \fBfolder\
 .sp
 .nf
 .ft C
-$ curl \-H X\-API\-Key:... "http://localhost:8384/rest/debug/file?folder=default&file=foo/bar"
+$ curl \-H X\-API\-Key:... \(dqhttp://localhost:8384/rest/debug/file?folder=default&file=foo/bar\(dq
 .ft P
 .fi
 .UNINDENT
 .UNINDENT
 .sp
-The returned object contains the same info as db\-file\-get, plus a summary
+The returned object contains the same info as \fI\%GET /rest/db/file\fP, plus a summary
 of \fBglobalVersions\fP\&.
 .SH NOAUTH ENDPOINTS
 .sp
 Calls that do not require authentication.
 .SS GET /rest/noauth/health
 .sp
-Returns a \fB{"status": "OK"}\fP object.
+Returns a \fB{\(dqstatus\(dq: \(dqOK\(dq}\fP object.
 .INDENT 0.0
 .INDENT 3.5
 .sp
 .nf
 .ft C
 {
-  "status": "OK"
+  \(dqstatus\(dq: \(dqOK\(dq
 }
 .ft P
 .fi
diff --git a/man/syncthing-security.7 b/man/syncthing-security.7
index 7dff50b75..b5bb59a55 100644
--- a/man/syncthing-security.7
+++ b/man/syncthing-security.7
@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-SECURITY" "7" "Sep 07, 2023" "v1.24.0" "Syncthing"
+.TH "SYNCTHING-SECURITY" "7" "Sep 17, 2023" "v1.24.0" "Syncthing"
 .SH NAME
 syncthing-security \- Security Principles
 .sp
diff --git a/man/syncthing-stignore.5 b/man/syncthing-stignore.5
index c01823cba..e77f78067 100644
--- a/man/syncthing-stignore.5
+++ b/man/syncthing-stignore.5
@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-STIGNORE" "5" "Sep 07, 2023" "v1.24.0" "Syncthing"
+.TH "SYNCTHING-STIGNORE" "5" "Sep 17, 2023" "v1.24.0" "Syncthing"
 .SH NAME
 syncthing-stignore \- Prevent files from being synchronized to other nodes
 .SH SYNOPSIS
@@ -147,7 +147,7 @@ single pair of parentheses (not “(?di)”).
 .INDENT 3.5
 Include patterns (that begin with \fB!\fP) cause Syncthing to traverse
 the entire directory tree regardless of other ignore patterns.
-If the watcher is enabled, the entire directory
+If the \fI\%watcher\fP is enabled, the entire directory
 tree will be watched as well.
 .sp
 Top\-level include patterns are treated as special cases and will not force Syncthing to
@@ -207,16 +207,16 @@ all files and directories called “foo”, ending in a “2” or starting with
 .nf
 .ft C
 \&.DS_Store     # ignored, will be deleted if gets in the way of parent directory removal
-foo           # ignored, matches "foo"
-foofoo        # synced, does not match "foo" but would match "foo*" or "*foo"
+foo           # ignored, matches \(dqfoo\(dq
+foofoo        # synced, does not match \(dqfoo\(dq but would match \(dqfoo*\(dq or \(dq*foo\(dq
 bar/          # synced
     baz       # synced
-    quux      # ignored, matches "qu*"
-    quuz      # synced, matches "qu*" but is excluded by the preceding "!quuz"
-bar2/         # synced, despite matching "*2" due to child frobble
+    quux      # ignored, matches \(dqqu*\(dq
+    quuz      # synced, matches \(dqqu*\(dq but is excluded by the preceding \(dq!quuz\(dq
+bar2/         # synced, despite matching \(dq*2\(dq due to child frobble
     baz       # ignored, due to parent being ignored
-    frobble   # synced, due to "!frobble"
-My Pictures/  # ignored, matched case insensitive "(?i)my pictures" pattern
+    frobble   # synced, due to \(dq!frobble\(dq
+My Pictures/  # ignored, matched case insensitive \(dq(?i)my pictures\(dq pattern
     Img15.PNG # ignored, due to parent being ignored
 .ft P
 .fi
diff --git a/man/syncthing-versioning.7 b/man/syncthing-versioning.7
index c43077372..44b2b0788 100644
--- a/man/syncthing-versioning.7
+++ b/man/syncthing-versioning.7
@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-VERSIONING" "7" "Sep 07, 2023" "v1.24.0" "Syncthing"
+.TH "SYNCTHING-VERSIONING" "7" "Sep 17, 2023" "v1.24.0" "Syncthing"
 .SH NAME
 syncthing-versioning \- Keep automatic backups of deleted files by other nodes
 .sp
@@ -156,14 +156,14 @@ set \-eu
 versionspath=~/.trashcan
 
 # The parameters we get from Syncthing
-folderpath="$1"
-filepath="$2"
+folderpath=\(dq$1\(dq
+filepath=\(dq$2\(dq
 
 # First ensure the dir where we need to store the file exists
-outpath=$(dirname "$versionspath/$filepath")
-mkdir \-p "$outpath"
+outpath=$(dirname \(dq$versionspath/$filepath\(dq)
+mkdir \-p \(dq$outpath\(dq
 # Then move the file there
-mv \-f "$folderpath/$filepath" "$versionspath/$filepath"
+mv \-f \(dq$folderpath/$filepath\(dq \(dq$versionspath/$filepath\(dq
 .ft P
 .fi
 .UNINDENT
@@ -209,25 +209,25 @@ rem We need command extensions for md to create intermediate folders in one go
 setlocal enableextensions
 
 rem Where I want my versions stored
-set "versions_path=%USERPROFILE%\e.trashcan"
+set \(dqversions_path=%USERPROFILE%\e.trashcan\(dq
 
 rem The parameters we get from Syncthing, \(aq~\(aq removes quotes if any
-set "folder_path=%~1"
-set "file_path=%~2"
+set \(dqfolder_path=%~1\(dq
+set \(dqfile_path=%~2\(dq
 
 rem First ensure the dir where we need to store the file exists
-for %%f in ("%versions_path%\e%file_path%") do set "output_path=%%~dpf"
-if not exist "%output_path%" md "%output_path%" || exit /b
+for %%f in (\(dq%versions_path%\e%file_path%\(dq) do set \(dqoutput_path=%%~dpf\(dq
+if not exist \(dq%output_path%\(dq md \(dq%output_path%\(dq || exit /b
 
 rem Finally move the file, overwrite existing file if any
-move /y "%folder_path%\e%file_path%" "%versions_path%\e%file_path%"
+move /y \(dq%folder_path%\e%file_path%\(dq \(dq%versions_path%\e%file_path%\(dq
 .ft P
 .fi
 .UNINDENT
 .UNINDENT
 .sp
-Finally, I set \fB"C:\eUsers\emfrnd\eScripts\eonlylatest.bat" "%FOLDER_PATH%"
-"%FILE_PATH%"\fP as the command name in Syncthing.
+Finally, I set \fB\(dqC:\eUsers\emfrnd\eScripts\eonlylatest.bat\(dq \(dq%FOLDER_PATH%\(dq
+\(dq%FILE_PATH%\(dq\fP as the command name in Syncthing.
 .SS Move to the Recycle Bin using PowerShell
 .sp
 We can use PowerShell to send files directly to the Recycle Bin, which
@@ -245,7 +245,7 @@ location, e.g. \fBC:\eUsers\eUser\eScripts\eSendToRecycleBin.ps1\fP\&.
 Add\-Type \-AssemblyName Microsoft.VisualBasic
 [Microsoft.VisualBasic.FileIO.FileSystem]::DeleteFile($args,\(aqOnlyErrorDialogs\(aq,\(aqSendToRecycleBin\(aq)
 if ($?) {
-  Write\-Output ("Recycled " + $args + ".")
+  Write\-Output (\(dqRecycled \(dq + $args + \(dq.\(dq)
 }
 .ft P
 .fi
@@ -268,15 +268,15 @@ Add\-Type \-AssemblyName Microsoft.VisualBasic
 # a modification and delete the existing file. If if does not, we assume
 # a deletion and recycle the current file. If succeeded, we also include
 # the deleted/recycled file in the Syncthing\(aqs DEBUG output.
-if (Test\-Path \-LiteralPath ((Split\-Path \-Path $args) + "\e~syncthing~" + (Split\-Path \-Path $args \-Leaf) + ".tmp")) {
+if (Test\-Path \-LiteralPath ((Split\-Path \-Path $args) + \(dq\e~syncthing~\(dq + (Split\-Path \-Path $args \-Leaf) + \(dq.tmp\(dq)) {
   [Microsoft.VisualBasic.FileIO.FileSystem]::DeleteFile($args,\(aqOnlyErrorDialogs\(aq,\(aqDeletePermanently\(aq)
   if ($?) {
-    Write\-Output ("Deleted " + $args + ".")
+    Write\-Output (\(dqDeleted \(dq + $args + \(dq.\(dq)
   }
 } else {
   [Microsoft.VisualBasic.FileIO.FileSystem]::DeleteFile($args,\(aqOnlyErrorDialogs\(aq,\(aqSendToRecycleBin\(aq)
   if ($?) {
-    Write\-Output ("Recycled " + $args + ".")
+    Write\-Output (\(dqRecycled \(dq + $args + \(dq.\(dq)
   }
 }
 .ft P
@@ -285,8 +285,8 @@ if (Test\-Path \-LiteralPath ((Split\-Path \-Path $args) + "\e~syncthing~" + (Sp
 .UNINDENT
 .sp
 Finally, we set the command name in Syncthing to \fBpowershell.exe
-\-ExecutionPolicy Bypass \-File "C:\eUsers\eUser\eScripts\eSendToRecycleBin.ps1"
-"%FOLDER_PATH%\e%FILE_PATH%"\fP\&.
+\-ExecutionPolicy Bypass \-File \(dqC:\eUsers\eUser\eScripts\eSendToRecycleBin.ps1\(dq
+\(dq%FOLDER_PATH%\e%FILE_PATH%\(dq\fP\&.
 .sp
 The only caveat that you should be aware of is that if your Syncthing
 folder is located on a portable storage, such as a USB stick, or if you
@@ -295,20 +295,20 @@ files permanently.
 .SH CONFIGURATION PARAMETER REFERENCE
 .sp
 The versioning settings are grouped into their own section of each folder in the
-\fBconfiguration file\fP\&.  The following shows an
+\fI\%configuration file\fP\&.  The following shows an
 example of such a section in the XML:
 .INDENT 0.0
 .INDENT 3.5
 .sp
 .nf
 .ft C
-<folder id="...">
-    <versioning type="simple">
+<folder id=\(dq...\(dq>
+    <versioning type=\(dqsimple\(dq>
         <cleanupIntervalS>3600</cleanupIntervalS>
         <fsPath></fsPath>
         <fsType>basic</fsType>
-        <param key="cleanoutDays" val="0"></param>
-        <param key="keep" val="5"></param>
+        <param key=\(dqcleanoutDays\(dq val=\(dq0\(dq></param>
+        <param key=\(dqkeep\(dq val=\(dq5\(dq></param>
     </versioning>
 </folder>
 .ft P
@@ -338,7 +338,7 @@ in the \fI\%params\fP element.
 .B versioning.fsType
 The internal file system implementation used to access this versions folder.
 Only applies if \fI\%fsPath\fP is also set non\-empty,
-otherwise the \fBfilesystemType\fP from the folder element is used
+otherwise the \fI\%filesystemType\fP from the folder element is used
 instead.  Refer to that option description for possible values.  Ignored for
 the \fBexternal\fP versioning strategy.
 .sp
diff --git a/man/syncthing.1 b/man/syncthing.1
index fc8e1abef..f25722cf0 100644
--- a/man/syncthing.1
+++ b/man/syncthing.1
@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING" "1" "Sep 07, 2023" "v1.24.0" "Syncthing"
+.TH "SYNCTHING" "1" "Sep 17, 2023" "v1.24.0" "Syncthing"
 .SH NAME
 syncthing \- Syncthing
 .SH SYNOPSIS
@@ -99,7 +99,7 @@ Write events to timestamped file \fBaudit\-YYYYMMDD\-HHMMSS.log\fP\&.
 .INDENT 0.0
 .TP
 .B \-\-auditfile=<file|\-|\-\->
-Use specified file or stream (\fB"\-"\fP for stdout, \fB"\-\-"\fP for stderr) for
+Use specified file or stream (\fB\(dq\-\(dq\fP for stdout, \fB\(dq\-\-\(dq\fP for stderr) for
 audit events, rather than the timestamped default file name.
 .UNINDENT
 .INDENT 0.0
@@ -170,7 +170,7 @@ together with \fB\-\-config\fP\&.
 .INDENT 0.0
 .TP
 .B \-\-logfile=<filename>
-Set destination filename for logging (use \fB"\-"\fP for stdout, which is the
+Set destination filename for logging (use \fB\(dq\-\(dq\fP for stdout, which is the
 default option).
 .UNINDENT
 .INDENT 0.0
@@ -363,7 +363,7 @@ it is validated and updated to the latest configuration schema, including adding
 default values for any new options.
 .sp
 The \fBdecrypt\fP subcommand is used in conjunction with untrusted (encrypted)
-devices, see the relevant section on decryption for
+devices, see the relevant section on \fI\%decryption\fP for
 details.  It does not depend on Syncthing to be running, but works on offline
 data.
 .sp