| Age | Commit message (Collapse) | Author |
|---|
|
During a cgocallback, the runtime calls needm to get an m.
The calls made during needm cannot themselves assume that
there is an m or a g (which is attached to the m).
In the old days of making direct system calls, the only thing
you had to do for such functions was mark them //go:nosplit,
to avoid the use of g in the stack split prologue.
But now, on operating systems that make system calls through
shared libraries and use code that saves state in the g or m
before doing so, it's not safe to assume g exists. In fact, it is
not even safe to call getg(), because it might fault deferencing
the TLS storage to find the g pointer (that storage may not be
initialized yet, at least on Windows, and perhaps on other systems
in the future).
The specific routines that are problematic are usleep and osyield,
which are called during lock contention in lockextra, called
from needm.
All this is rather subtle and hidden, so in addition to fixing the
problem on Windows, this CL makes the fact of not running on
a g much clearer by introducing variants usleep_no_g and
osyield_no_g whose names should make clear that there is no g.
And then we can remove the various sketchy getg() == nil checks
in the existing routines.
As part of this cleanup, this CL also deletes onosstack on Windows.
onosstack is from back when the runtime was implemented in C.
It predates systemstack but does essentially the same thing.
Instead of having two different copies of this code, we can use
systemstack consistently. This way we need not port onosstack
to each architecture.
This CL is part of a stack adding windows/arm64
support (#36439), intended to land in the Go 1.17 cycle.
This CL is, however, not windows/arm64-specific.
It is cleanup meant to make the port (and future ports) easier.
Change-Id: I3352de1fd0a3c26267c6e209063e6e86abd26187
Reviewed-on: https://go-review.googlesource.com/c/go/+/288793
Trust: Russ Cox <rsc@golang.org>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Calls to lock may need to use global members of mOS that also need to be
cleaned up before the thread exits. Before this commit, these resources
would leak. Moving them to be cleaned up in unminit, however, would race
with gstack on unix. So this creates a new helper, mdestroy, to release
resources that must be destroyed only after locks are no longer
required. We also move highResTimer lifetime to the same semantics,
since it doesn't help to constantly acquire and release the timer object
during dropm.
Updates #43720.
Change-Id: Ib3f598f3fda1b2bbcb608099616fa4f85bc1c289
Reviewed-on: https://go-review.googlesource.com/c/go/+/284137
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Trust: Alex Brainman <alex.brainman@gmail.com>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The FreeBSD syscall convention uses the carry flag to indicate whether
an error has occured. The sys_umtx_op, thr_new, and pipe2 syscall
wrappers were failing to account for this convention and silently
suppressing errors as a result. This commit corrects these wrappers
by copying the pattern used by the other fallible syscall wrappers.
Note that futexsleep1 must now explicitly ignore the ETIMEDOUT error
from sys_umtx_op. Previously ETIMEDOUT was implicitly ignored because
sys_umtx_op never returned an error.
Fixes #43106.
Change-Id: I9c422b87cf4c6d308003bf42c3b419f785578b5d
Reviewed-on: https://go-review.googlesource.com/c/go/+/276892
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Trust: Than McIntosh <thanm@google.com>
|
|
This adds pipe/pipe2 on Solaris as they exist on other Unix systems.
They were not added previously because Solaris does not need them
for netpollBreak. They are added now in preparation for using pipes
in TestSignalM.
Updates #35276
Change-Id: I53dfdf077430153155f0a79715af98b0972a841c
Reviewed-on: https://go-review.googlesource.com/c/go/+/206077
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
|
|
For these, we split up the existing runtime.raise assembly
implementation into its constituent "get thread ID" and "signal
thread" parts. This lets us implement signalM and reimplement raise in
pure Go. (NetBSD conveniently already had lwp_self.)
We also change minit to store the procid directly, rather than
depending on newosproc to do so. This is because newosproc isn't
called for the bootstrap M, but we need a procid for every M. This is
also simpler overall.
For #10958, #24543.
Change-Id: Ie5f1fcada6a33046375066bcbe054d1f784d39c0
Reviewed-on: https://go-review.googlesource.com/c/go/+/201402
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
|
This requires defining pipe, pipe2, and setNonblock for various platforms.
The new function is currently only used on AIX. It will be used by
later CLs in this series.
Updates #27707
Change-Id: Id2f987b66b4c66a3ef40c22484ff1d14f58e9b31
Reviewed-on: https://go-review.googlesource.com/c/go/+/171822
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
|
|
Change-Id: Ib9a40d5596f5735a00483e2d2db965402f05671b
Reviewed-on: https://go-review.googlesource.com/c/go/+/169120
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
|
|
The general code for setting a timespec value sometimes used set_nsec
and sometimes used a combination of set_sec and set_nsec. Standardize
on a setNsec function that takes a number of nanoseconds and splits
them up to set the tv_sec and tv_nsec fields. Consistently mark
setNsec as go:nosplit, since it has to be that way on some systems
including Darwin and GNU/Linux. Consistently use timediv on 32-bit
systems to help stay within split-stack limits on processors that
don't have a 64-bit division instruction.
Change-Id: I6396bb7ddbef171a96876bdeaf7a1c585a6d725b
Reviewed-on: https://go-review.googlesource.com/c/go/+/167389
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
|
|
Assumes mandatory VFP and VFPv3 support to be present by default
but not IDIVA if AT_HWCAP is not available.
Adds GODEBUGCPU options to disable the use of code paths in the runtime
that use hardware support for division.
Change-Id: Ida02311bd9b9701de3fc120697e69445bf6c0853
Reviewed-on: https://go-review.googlesource.com/114826
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
|
|
kqueue, kevent, closeonexec, setitimer, with sysctl and fcntl helpers.
TODO:arm,arm64
Change-Id: I9386f377186d6ac7cb99064c524a67e0c8282eba
Reviewed-on: https://go-review.googlesource.com/118561
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
|
|
In golang.org/cl/102355 I mistakenly used 26 instead of 25 as the AT_HWCAP value.
26 is AT_HWCAP2. While experimenting with FreeBSD-11.2-BETA3 (where both values are
being supplied in the auxv), the AT_HWCAP2 value read is 0 which triggers the error again:
runtime: this CPU has no floating point hardware, so it cannot run this GOARM=7 binary. Recompile using GOARM=5.
Updates #24507.
Change-Id: Ide04b7365d8f10e4650edf4e188dd58bdf42cc26
Reviewed-on: https://go-review.googlesource.com/114822
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
|
|
Replace thread creation with calls to the pthread
library in libc.
Update #17490
Change-Id: I1e19965c45255deb849b059231252fc6a7861d6c
Reviewed-on: https://go-review.googlesource.com/108679
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
|
|
Use AT_TIMEKEEP ELF aux entry to access a kernel mapped ring of timehands structs.
The timehands are updated by the kernel periodically, but for accurate measure the
timecounter still needs to be queried.
Currently the fast path is used only when kern.timecounter.hardware==TSC-low
or kern.timecounter.hardware=='ARM MPCore Timecounter',
other timecounters revert back to regular system call.
TODO: add support for HPET timecounter on 386/amd64.
Change-Id: I321ca4e92be63ba21a2574b758ef5c1e729086ad
Reviewed-on: https://go-review.googlesource.com/93156
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
|
|
AT_HWCAP is not available on FreeBSD-11.1-RELEASE or earlier and the wrong const was used.
Use the correct value, and initialize hwcap with ^uint32(0) inorder not to fail the VFP tests.
Fixes #24507.
Change-Id: I5c3eed57bb53bf992b7de0eec88ea959806306b9
Reviewed-on: https://go-review.googlesource.com/102355
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
|
Fixes #14327
Much of the code is based on the linux/amd64 code that implements these
build modes, and code is shared where possible.
Change-Id: Ia510f2023768c0edbc863aebc585929ec593b332
Reviewed-on: https://go-review.googlesource.com/93875
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
|
|
Decode AT_PAGESZ to determine physPageSize on freebsd/{386,amd64,arm}
and AT_HWCAP for hwcap and hardDiv on freebsd/arm. Also use hwcap to
perform the FP checks in checkgoarm akin to the linux/arm
implementation.
Change-Id: I532810a1581efe66277e4305cb234acdc79ee91e
Reviewed-on: https://go-review.googlesource.com/99780
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
|
|
Follow CL 93655 which removed the (commented-out) usage of this
function.
Also remove unused constant _RLIMIT_AS and type rlimit.
Change-Id: Ifb6e6b2104f4c2555269f8ced72bfcae24f5d5e9
Reviewed-on: https://go-review.googlesource.com/94775
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
|
|
Change-Id: Id057dcc85d64e5c670710fbab6cacd4b906cf594
Reviewed-on: https://go-review.googlesource.com/93655
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
|
|
Currently the FreeBSD CPU affinity code assumes that the maximum
GOMAXPROCS is 256, but we just removed that limit.
This commit rewrites the FreeBSD CPU affinity code to raise the CPU
count limit to 65,536, like the Linux CPU affinity code, and to
degrade more gracefully if we do somehow go over that.
Change-Id: Ic4ca7f88bd8b9448aae4dbd43ef21a6c1b8fea63
Reviewed-on: https://go-review.googlesource.com/66291
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
|
|
This is a workaround for a FreeBSD kernel bug. It can be removed when
we are confident that all people are using the fixed kernel. See #15658.
Updates #15658.
Change-Id: I0ecdccb77ddd0c270bdeac4d3a5c8abaf0449075
Reviewed-on: https://go-review.googlesource.com/38325
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
|
|
In FreeBSD when run Go proc under a given sub-list of
processors(e.g. 'cpuset -l 0 ./a.out' in multi-core system),
runtime.NumCPU() still return all physical CPUs from sysctl
hw.ncpu instead of account from sub-list.
Fix by use syscall cpuset_getaffinity to account the number of sub-list.
Fixes #15206
Change-Id: If87c4b620e870486efa100685db5debbf1210a5b
Reviewed-on: https://go-review.googlesource.com/29341
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
|
|
In FreeBSD 10.0, the _umtx_op syscall was changed to allow sleeping on
any supported clock, but the default clock was switched from a monotonic
clock to CLOCK_REALTIME.
Prior to 10.0, the __umtx_op_wait* functions ignored the fourth argument
to _umtx_op (uaddr1), expected the fifth argument (uaddr2) to be a
struct timespec pointer, and used a monotonic clock (nanouptime(9)) for
timeout calculations.
Since 10.0, if callers want a clock other than CLOCK_REALTIME, they must
call _umtx_op with uaddr1 set to a value greater than sizeof(struct
timespec), and with uaddr2 as pointer to a struct _umtx_time, rather
than a timespec. Callers can set the _clockid field of the struct
_umtx_time to request the clock they want.
The relevant FreeBSD commit:
https://svnweb.freebsd.org/base?view=revision&revision=232144
Fixes #17168
Change-Id: I3dd7b32b683622b8d7b4a6a8f9eb56401bed6bdf
Reviewed-on: https://go-review.googlesource.com/30154
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
|
Change setsig, setsigstack, getsig, raise, raiseproc to take uint32 for
signal number parameter, as that is the type mostly used for signal
numbers. Same for dieFromSignal, sigInstallGoHandler, raisebadsignal.
Remove setsig restart parameter, as it is always either true or
irrelevant.
Don't check the handler in setsigstack, as the only caller does that
anyhow.
Don't bother to convert the handler from sigtramp to sighandler in
getsig, as it will never be called when the handler is sigtramp or
sighandler.
Don't check the return value from rt_sigaction in the GNU/Linux version
of setsigstack; no other setsigstack checks it, and it never fails.
Change-Id: I6bbd677e048a77eddf974dd3d017bc3c560fbd48
Reviewed-on: https://go-review.googlesource.com/29953
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
|
|
The OS-independent sigmask type was not pulling its weight. Replace it
with the OS-dependent sigset type. This requires adding an OS-specific
sigaddset function, but permits removing the OS-specific sigmaskToSigset
function.
Change-Id: I43307b512b0264ec291baadaea902f05ce212305
Reviewed-on: https://go-review.googlesource.com/29950
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
|
|
Change-Id: I2cbb13eb85876ad05a52cbd498a9b86e7a28899c
Reviewed-on: https://go-review.googlesource.com/29772
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
|
|
All the variants that sets the new signal mask in minit do the same
thing, so merge them. This requires an OS-specific sigdelset function;
the function already exists for linux, and is now added for other OS's.
Change-Id: Ie96f6f02e2cf09c43005085985a078bd9581f670
Reviewed-on: https://go-review.googlesource.com/29771
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
|
Combine the various versions of sigtrampgo into a single function in
signal_unix.go. This requires defining a fixsigcode method on sigctxt
for all operating systems; it only does something on Darwin. This also
requires changing the darwin/amd64 signal handler to call sigreturn
itself, rather than relying on sigtrampgo to call sigreturn for it. We
can then drop the Darwin sigreturn function, as it is no longer used.
Change-Id: I5a0b9d2d2c141957e151b41e694efeb20e4b4b9a
Reviewed-on: https://go-review.googlesource.com/29761
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
|
|
Change all Unix systems to use stackt for the alternate signal
stack (some were using sigaltstackt). Add OS-specific setSignalstackSP
function to handle different types for ss_sp field, and unify all
OS-specific signalstack functions into one. Unify handling of alternate
signal stack in OS-specific minit and sigtrampgo functions via new
functions minitSignalstack and setGsignalStack.
Change-Id: Idc316dc69b1dd725717acdf61a1cd8b9f33ed174
Reviewed-on: https://go-review.googlesource.com/29757
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
|
|
Unify the OS-specific versions of msigsave, msigrestore, sigblock,
updatesigmask, and unblocksig into single versions in signal_unix.go.
To do this, make sigprocmask work the same way on all systems, which
required adding a definition of sigprocmask for linux and openbsd.
Also add a single OS-specific function sigmaskToSigset.
Change-Id: I7cbf75131dddb57eeefe648ef845b0791404f785
Reviewed-on: https://go-review.googlesource.com/29689
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
|
|
Currently the physical page size assumed by the runtime is hard-coded.
On Linux the runtime at least fetches the OS page size during init and
sanity checks against the hard-coded value, but they may still differ.
On other OSes we wouldn't even notice.
Add support on all OSes to fetch the actual OS physical page size
during runtime init and lift the sanity check of PhysPageSize from the
Linux init code to general malloc init. Currently this is the only use
of the retrieved page size, but we'll add more shortly.
Updates #12480 and #10180.
Change-Id: I065f2834bc97c71d3208edc17fd990ec9058b6da
Reviewed-on: https://go-review.googlesource.com/25050
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
|
|
If creating a new thread fails with EAGAIN, point the user at ulimit.
Fixes #15476.
Change-Id: Ib36519614b5c72776ea7f218a0c62df1dd91a8ea
Reviewed-on: https://go-review.googlesource.com/24570
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
|
|
Change-Id: Ice9c234960adc7857c8370b777a0b18e29d59281
Reviewed-on: https://go-review.googlesource.com/22853
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
|
I meant to delete these in CL 22850, actually.
Change-Id: I0c286efd2b9f1caf0221aa88e3bcc03649c89517
Reviewed-on: https://go-review.googlesource.com/22851
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
|
Change-Id: Ib0ba691c4657fe18a4659753e70d97c623cb9c1d
Reviewed-on: https://go-review.googlesource.com/22850
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
|
|
This is a subset of https://golang.org/cl/20022 with only the copyright
header lines, so the next CL will be smaller and more reviewable.
Go policy has been single space after periods in comments for some time.
The copyright header template at:
https://golang.org/doc/contribute.html#copyright
also uses a single space.
Make them all consistent.
Change-Id: Icc26c6b8495c3820da6b171ca96a74701b4a01b0
Reviewed-on: https://go-review.googlesource.com/20111
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
|
Reduces the size of m by ~8% on linux/amd64 (1040 bytes -> 960 bytes).
There are also windows-specific fields, but they're currently
referenced in OS-independent source files (but only when
GOOS=="windows").
Change-Id: I13e1471ff585ccced1271f74209f8ed6df14c202
Reviewed-on: https://go-review.googlesource.com/16173
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
|
|
This change splits signal_unix.go into signal_unix.go and
signal2_unix.go and removes the fake symbol sigfwd from signal
forwarding unsupported platforms for clarification purpose.
Change-Id: I205eab5cf1930fda8a68659b35cfa9f3a0e67ca6
Reviewed-on: https://go-review.googlesource.com/12062
Reviewed-by: Ian Lance Taylor <iant@golang.org>
|
|
In the past badsignal would crash the program. In
https://golang.org/cl/10757044 badsignal was changed to call sigsend,
to fix issue #3250. The effect of this was that when a non-Go thread
received a signal, and os/signal.Notify was not being used to check
for occurrences of the signal, the signal was ignored.
This changes the code so that if os/signal.Notify is not being used,
then the signal handler is reset to what it was, and the signal is
raised again. This lets non-Go threads handle the signal as they
wish. In particular, it means that a segmentation violation in a
non-Go thread will ordinarily crash the process, as it should.
Fixes #10139.
Update #11794.
Change-Id: I2109444aaada9d963ad03b1d071ec667760515e5
Reviewed-on: https://go-review.googlesource.com/12503
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
|
|
Follows the linux signal forwarding semantics from
http://golang.org/cl/8712, sharing the implementation of sigfwdgo.
Forwarding for 386, arm, and arm64 will follow.
Change-Id: I6bf30d563d19da39b6aec6900c7fe12d82ed4f62
Reviewed-on: https://go-review.googlesource.com/9302
Reviewed-by: Ian Lance Taylor <iant@golang.org>
|
|
Normally, a panic/throw only shows the thread stack for the current thread
and all paused goroutines. Goroutines running on other threads, or other threads
running on their system stacks, are opaque. Change that when GODEBUG=crash,
by passing a SIGQUIT around to all the threads when GODEBUG=crash.
If this works out reasonably well, we might make the SIGQUIT relay part of
the standard panic/throw death, perhaps eliding idle m's.
Change-Id: If7dd354f7f3a6e326d17c254afcf4f7681af2f8b
Reviewed-on: https://go-review.googlesource.com/2811
Reviewed-by: Rick Hudson <rlh@golang.org>
|
|
It builds.
Don't know if it works, but it's a lot closer than having everything in C.
LGTM=r
R=r
CC=golang-codereviews
https://golang.org/cl/168590043
|
|
The C header files are the single point of truth:
every C enum constant Foo is available to Go as _Foo.
Remove or redirect duplicate Go declarations so they
cannot be out of sync.
Eventually we will need to put constants in Go, but for now having
them be out of sync with C is too risky. These predate the build
support for auto-generating Go constants from the C definitions.
LGTM=iant
R=iant
CC=golang-codereviews
https://golang.org/cl/141510043
|
|
Preparation was in CL 134570043.
This CL contains only the effect of 'hg mv src/pkg/* src'.
For more about the move, see golang.org/s/go14nopkg.
|
