| Age | Commit message (Collapse) | Author |
|---|
|
The debug call tests currently assume that the target Go function is
ABI0; this is clearly no longer true when we switch to the new ABI, so
make the tests set up argument register state in the debug call handler
and copy back results returned in registers.
A small snag in calling a Go function that follows the new ABI is that
the debug call protocol depends on the AX register being set to a
specific value as it bounces in and out of the handler, but this
register is part of the new register ABI, so results end up being
clobbered. Use R12 instead.
Next, the new desugaring behavior for "go" statements means that
newosproc1 must always call a function with no frame; if it takes any
arguments, it closes over them and they're passed in the context
register. Currently when debugCallWrap creates a new goroutine, it uses
newosproc1 directly and passes a non-zero-sized frame, so that needs to
be updated. To fix this, briefly use the g's param field which is
otherwise only used for channels to pass an explicitly allocated object
containing the "closed over" variables. While we could manually do the
desugaring ourselves (we cannot do so automatically because the Go
compiler prevents heap-allocated closures in the runtime), that bakes in
more ABI details in a place that really doesn't need to care about them.
Finally, there's an old bug here where the context register was set up
in CX, so technically closure calls never worked. Oops. It was otherwise
harmless for other types of calls before, but now CX is an argument
register, so now that interferes with regular calls, too.
For #40724.
Change-Id: I652c25ed56a25741bb04c24cfb603063c099edde
Reviewed-on: https://go-review.googlesource.com/c/go/+/309169
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Alessandro Arzilli <alessandro.arzilli@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
|
|
Make all our package sources use Go 1.17 gofmt format
(adding //go:build lines).
Part of //go:build change (#41184).
See https://golang.org/design/draft-gobuild
Change-Id: Ia0534360e4957e58cd9a18429c39d0e32a6addb4
Reviewed-on: https://go-review.googlesource.com/c/go/+/294430
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
|
|
Currently, when a debugger injects a call, that call happens on the
goroutine where the debugger injected it. However, this requires
significant runtime complexity that we're about to remove.
To prepare for this, this CL switches to a different approach that
leaves the interrupted goroutine parked and runs the debug call on a
new goroutine. When the debug call returns, it resumes the original
goroutine.
This should be essentially transparent to debuggers. It follows the
exact same call injection protocol and ensures the whole protocol
executes indivisibly on a single OS thread. The only difference is
that the current G and stack now change part way through the protocol.
For #36365.
Change-Id: I68463bfd73cbee06cfc49999606410a59dd8f653
Reviewed-on: https://go-review.googlesource.com/c/go/+/229299
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
|
Fixes #32985
Change-Id: I5d504715dcc92d4f4f560ea2e843d9275f938685
Reviewed-on: https://go-review.googlesource.com/c/go/+/207620
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Austin Clements <austin@google.com>
|
|
Fixes #35376
Change-Id: Ib95ad336425e73cc4d412dafed0ba5e0a8130bd2
Reviewed-on: https://go-review.googlesource.com/c/go/+/205718
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
|
|
Without this CL, one of the TestDebugCall tests would fail 1% to 2% of
the time on the android-amd64-emu gomote. With this CL, I ran the
tests for 1000 iterations with no failures.
Fixes #32985
Change-Id: I541268a2a0c10d0cd7604f0b2dbd15c1d18e5730
Reviewed-on: https://go-review.googlesource.com/c/go/+/205248
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
|
|
This fixes a few different issues that led to hangs and general
flakiness in the TestDebugCall* tests.
1. This fixes missing wake-ups in two error paths of the SIGTRAP
signal handler. If the goroutine was in an unknown state, or if
there was an unknown debug call status, we currently don't wake the
injection coordinator. These are terminal states, so this resulted
in a hang.
2. This adds a retry if the target goroutine is in a transient state
that prevents us from injecting a call. The most common failure
mode here is that the target goroutine is in _Grunnable, but this
was previously masked because it deadlocked the test.
3. Related to 2, this switches the "ready" signal from the target
goroutine from a blocking channel send to a non-blocking channel
send. This makes it much less likely that we'll catch this
goroutine while it's in the runtime performing that send.
4. This increases GOMAXPROCS from 2 to 8 during these tests. With the
current setting of 2, we can have at most the non-preemptible
goroutine we're injecting a call in to and the goroutine that's
trying to make it exit. If anything else comes along, it can
deadlock. One particular case I observed was in TestDebugCallGC,
where runtime.GC() returns before the forEachP that prepares
sweeping on all goroutines has finished. When this happens, the
forEachP blocks on the non-preemptible loop, which means we now
have at least three goroutines that need to run.
Fixes #25519.
Updates #29124.
Change-Id: I7bc41dc0b865b7d0bb379cb654f9a1218bc37428
Reviewed-on: https://go-review.googlesource.com/c/154112
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
|
|
The hasprefix function is redundant and can be removed since it has
the same implementation as hasPrefix modulo variable names.
Fixes #25688
Change-Id: I499cc24a2b5c38d1301718a4e66f555fd138386f
Reviewed-on: https://go-review.googlesource.com/115835
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
|
|
Updates #25519
Change-Id: Ibcdf948fd38d8d02d467b62213566ec0d7ce0d6a
Reviewed-on: https://go-review.googlesource.com/123180
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
|
|
This adds a mechanism for debuggers to safely inject calls to Go
functions on amd64. Debuggers must participate in a protocol with the
runtime, and need to know how to lay out a call frame, but the runtime
support takes care of the details of handling live pointers in
registers, stack growth, and detecting the trickier conditions when it
is unsafe to inject a user function call.
Fixes #21678.
Updates derekparker/delve#119.
Change-Id: I56d8ca67700f1f77e19d89e7fc92ab337b228834
Reviewed-on: https://go-review.googlesource.com/109699
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
|
