Age | Commit message (Collapse) | Author |
|
Change-Id: I25e6fb733618b0a7af8adc69be85f3503810acf4
Reviewed-on: https://go-review.googlesource.com/c/go/+/213658
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
|
|
If the defer function pointer is nil, force the seg fault to happen in deferreturn
rather than in jmpdefer. jmpdefer is used fairly infrequently now because most
functions have open-coded defers.
The open-coded defer implementation calls gentraceback() with a callback when
looking for the first open-coded defer frame. gentraceback() throws an error if it
is called with a callback on an LR architecture and jmpdefer is on the stack,
because the stack trace can be incorrect in that case - see issue #8153. So, we
want to make sure that we don't have a seg fault in jmpdefer.
Fixes #36050
Change-Id: Ie25e6f015d8eb170b40248dedeb26a37b7f9b38d
Reviewed-on: https://go-review.googlesource.com/c/go/+/210978
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
|
When we do a successful recover of a panic, we resume normal execution by
returning from the frame that had the deferred call that did the recover (after
executing any remaining deferred calls in that frame).
However, suppose we have called runtime.Goexit and there is a panic during one of the
deferred calls run by the Goexit. Further assume that there is a deferred call in
the frame of the Goexit or a parent frame that does a recover. Then the recovery
process will actually resume normal execution above the Goexit frame and hence
abort the Goexit. We will not terminate the thread as expected, but continue
running in the frame above the Goexit.
To fix this, we explicitly create a _panic object for a Goexit call. We then
change the "abort" behavior for Goexits, but not panics. After a recovery, if the
top-level panic is actually a Goexit that is marked to be aborted, then we return
to the Goexit defer-processing loop, so that the Goexit is not actually aborted.
Actual code changes are just panic.go, runtime2.go, and funcid.go. Adjusted the
test related to the new Goexit behavior (TestRecoverBeforePanicAfterGoexit) and
added several new tests of aborted panics (whose behavior has not changed).
Fixes #29226
Change-Id: Ib13cb0074f5acc2567a28db7ca6912cfc47eecb5
Reviewed-on: https://go-review.googlesource.com/c/go/+/200081
Run-TryBot: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
|
|
extra funcdata
Generate inline code at defer time to save the args of defer calls to unique
(autotmp) stack slots, and generate inline code at exit time to check which defer
calls were made and make the associated function/method/interface calls. We
remember that a particular defer statement was reached by storing in the deferBits
variable (always stored on the stack). At exit time, we check the bits of the
deferBits variable to determine which defer function calls to make (in reverse
order). These low-cost defers are only used for functions where no defers
appear in loops. In addition, we don't do these low-cost defers if there are too
many defer statements or too many exits in a function (to limit code increase).
When a function uses open-coded defers, we produce extra
FUNCDATA_OpenCodedDeferInfo information that specifies the number of defers, and
for each defer, the stack slots where the closure and associated args have been
stored. The funcdata also includes the location of the deferBits variable.
Therefore, for panics, we can use this funcdata to determine exactly which defers
are active, and call the appropriate functions/methods/closures with the correct
arguments for each active defer.
In order to unwind the stack correctly after a recover(), we need to add an extra
code segment to functions with open-coded defers that simply calls deferreturn()
and returns. This segment is not reachable by the normal function, but is returned
to by the runtime during recovery. We set the liveness information of this
deferreturn() to be the same as the liveness at the first function call during the
last defer exit code (so all return values and all stack slots needed by the defer
calls will be live).
I needed to increase the stackguard constant from 880 to 896, because of a small
amount of new code in deferreturn().
The -N flag disables open-coded defers. '-d defer' prints out the kind of defer
being used at each defer statement (heap-allocated, stack-allocated, or
open-coded).
Cost of defer statement [ go test -run NONE -bench BenchmarkDefer$ runtime ]
With normal (stack-allocated) defers only: 35.4 ns/op
With open-coded defers: 5.6 ns/op
Cost of function call alone (remove defer keyword): 4.4 ns/op
Text size increase (including funcdata) for go binary without/with open-coded defers: 0.09%
The average size increase (including funcdata) for only the functions that use
open-coded defers is 1.1%.
The cost of a panic followed by a recover got noticeably slower, since panic
processing now requires a scan of the stack for open-coded defer frames. This scan
is required, even if no frames are using open-coded defers:
Cost of panic and recover [ go test -run NONE -bench BenchmarkPanicRecover runtime ]
Without open-coded defers: 62.0 ns/op
With open-coded defers: 255 ns/op
A CGO Go-to-C-to-Go benchmark got noticeably faster because of open-coded defers:
CGO Go-to-C-to-Go benchmark [cd misc/cgo/test; go test -run NONE -bench BenchmarkCGoCallback ]
Without open-coded defers: 443 ns/op
With open-coded defers: 347 ns/op
Updates #14939 (defer performance)
Updates #34481 (design doc)
Change-Id: I63b1a60d1ebf28126f55ee9fd7ecffe9cb23d1ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/202340
Reviewed-by: Austin Clements <austin@google.com>
|
|
code and extra funcdata"
This reverts CL 190098.
Reason for revert: broke several builders.
Change-Id: I69161352f9ded02537d8815f259c4d391edd9220
Reviewed-on: https://go-review.googlesource.com/c/go/+/201519
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
|
|
extra funcdata
Generate inline code at defer time to save the args of defer calls to unique
(autotmp) stack slots, and generate inline code at exit time to check which defer
calls were made and make the associated function/method/interface calls. We
remember that a particular defer statement was reached by storing in the deferBits
variable (always stored on the stack). At exit time, we check the bits of the
deferBits variable to determine which defer function calls to make (in reverse
order). These low-cost defers are only used for functions where no defers
appear in loops. In addition, we don't do these low-cost defers if there are too
many defer statements or too many exits in a function (to limit code increase).
When a function uses open-coded defers, we produce extra
FUNCDATA_OpenCodedDeferInfo information that specifies the number of defers, and
for each defer, the stack slots where the closure and associated args have been
stored. The funcdata also includes the location of the deferBits variable.
Therefore, for panics, we can use this funcdata to determine exactly which defers
are active, and call the appropriate functions/methods/closures with the correct
arguments for each active defer.
In order to unwind the stack correctly after a recover(), we need to add an extra
code segment to functions with open-coded defers that simply calls deferreturn()
and returns. This segment is not reachable by the normal function, but is returned
to by the runtime during recovery. We set the liveness information of this
deferreturn() to be the same as the liveness at the first function call during the
last defer exit code (so all return values and all stack slots needed by the defer
calls will be live).
I needed to increase the stackguard constant from 880 to 896, because of a small
amount of new code in deferreturn().
The -N flag disables open-coded defers. '-d defer' prints out the kind of defer
being used at each defer statement (heap-allocated, stack-allocated, or
open-coded).
Cost of defer statement [ go test -run NONE -bench BenchmarkDefer$ runtime ]
With normal (stack-allocated) defers only: 35.4 ns/op
With open-coded defers: 5.6 ns/op
Cost of function call alone (remove defer keyword): 4.4 ns/op
Text size increase (including funcdata) for go cmd without/with open-coded defers: 0.09%
The average size increase (including funcdata) for only the functions that use
open-coded defers is 1.1%.
The cost of a panic followed by a recover got noticeably slower, since panic
processing now requires a scan of the stack for open-coded defer frames. This scan
is required, even if no frames are using open-coded defers:
Cost of panic and recover [ go test -run NONE -bench BenchmarkPanicRecover runtime ]
Without open-coded defers: 62.0 ns/op
With open-coded defers: 255 ns/op
A CGO Go-to-C-to-Go benchmark got noticeably faster because of open-coded defers:
CGO Go-to-C-to-Go benchmark [cd misc/cgo/test; go test -run NONE -bench BenchmarkCGoCallback ]
Without open-coded defers: 443 ns/op
With open-coded defers: 347 ns/op
Updates #14939 (defer performance)
Updates #34481 (design doc)
Change-Id: I51a389860b9676cfa1b84722f5fb84d3c4ee9e28
Reviewed-on: https://go-review.googlesource.com/c/go/+/190098
Reviewed-by: Austin Clements <austin@google.com>
|
|
Add a bunch of extra tests and benchmarks for defer, in preparation for new
low-cost (open-coded) implementation of defers (see #34481),
- New file defer_test.go that tests a bunch more unusual defer scenarios,
including things that might have problems for open-coded defers.
- Additions to callers_test.go actually verifying what the stack trace looks like
for various panic or panic-recover scenarios.
- Additions to crash_test.go testing several more crash scenarios involving
recursive panics.
- New benchmark in runtime_test.go measuring speed of panic-recover
- New CGo benchmark in cgo_test.go calling from Go to C back to Go that
shows defer overhead
Updates #34481
Change-Id: I423523f3e05fc0229d4277dd00073289a5526188
Reviewed-on: https://go-review.googlesource.com/c/go/+/197017
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
|
|
This is a subset of https://golang.org/cl/20022 with only the copyright
header lines, so the next CL will be smaller and more reviewable.
Go policy has been single space after periods in comments for some time.
The copyright header template at:
https://golang.org/doc/contribute.html#copyright
also uses a single space.
Make them all consistent.
Change-Id: Icc26c6b8495c3820da6b171ca96a74701b4a01b0
Reviewed-on: https://go-review.googlesource.com/20111
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
|
This indirectly implements a small fix for runtime/pprof: it used to
look for runtime.gopanic when it should have been looking for
runtime.sigpanic.
Update #11432.
Change-Id: I5e3f5203b2ac5463efd85adf6636e64174aacb1d
Reviewed-on: https://go-review.googlesource.com/19869
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
|