| Age | Commit message (Collapse) | Author |
|---|
|
Panic if the slice is too short.
Updates #395
Change-Id: I90f4bff2da5d8f3148ba06d2482084f32b25c29a
Reviewed-on: https://go-review.googlesource.com/c/go/+/301650
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
|
|
The regabi builders are unhappy about badctxt calling throw
calling systemstack calling gosave_systemstack_switch calling
badctxt, all nosplit, repeating. This wouldn't actually happen
since after one systemstack we'd end up on the system stack
and the next one wouldn't call gosave_systemstack_switch at all.
The badctxt call itself is in a very unlikely assertion failure
inside gosave_systemstack_switch.
Keep the assertion check but call runtime.abort instead on failure,
breaking the detected (but not real) cycle.
Change-Id: Iaf5c0fc065783b8c1c6d0f62d848f023a0714b96
Reviewed-on: https://go-review.googlesource.com/c/go/+/294069
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
|
No change to actual runtime, but helps reduce the laundry list
of functions.
mcall, morestack, and asmcgocall are not actually top-of-frame,
so those need more attention in follow-up CLs.
mstart moved to assembly so that it can be marked TOPFRAME.
Since TOPFRAME also tells DWARF consumers not to unwind
this way, this change should also improve debuggers a
marginal amount.
This CL is part of a stack adding windows/arm64
support (#36439), intended to land in the Go 1.17 cycle.
This CL is, however, not windows/arm64-specific.
It is cleanup meant to make the port (and future ports) easier.
Change-Id: If1e0d46ca973de5e46b62948d076f675f285b5d9
Reviewed-on: https://go-review.googlesource.com/c/go/+/288802
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
|
A g's sched.g is set in newproc1:
newg.sched.g = guintptr(unsafe.Pointer(newg))
After that, it never changes. Yet lots of assembly code does
"g.sched.g = g" unnecessarily. Remove all those lines to avoid
confusion about whether it ever changes.
Also, split gogo into two functions, one that does the nil g check
and a second that does the actual switch. This way, if the nil g check
fails, we get a stack trace showing the call stack that led to the failure.
(The SP write would otherwise cause the stack trace to abort.)
Also restore the proper nil g check in a handful of assembly functions.
(There is little point in checking for nil g *after* installing it as the real g.)
Change-Id: I22866b093f901f765de1d074e36eeec10366abfb
Reviewed-on: https://go-review.googlesource.com/c/go/+/292109
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
|
Both asmcgocall and systemstack need to save the calling Go code's
context for use by traceback, but they do it differently.
Systemstack's appraoch is better, because it doesn't require a
special case in traceback.
So make them both use that.
While we are here, the fake mstart caller in systemstack is
no longer needed and can be removed.
(traceback knows to stop in systemstack because of the writes to SP.)
Also remove the fake mstarts in sys_windows_*.s.
And while we are there, fix the control flow guard code in sys_windows_arm.s.
The current code is using pointers to a stack frame that technically is gone
once we hit the RET instruction. Clearly it's working OK, but better not to depend
on data below SP being preserved, even for just a few instructions.
Store the value we need in other registers instead.
(This code is only used for pushing a sigpanic call, which does not
actually return to the site of the fault and therefore doesn't need to
preserve any of the registers.)
This CL is part of a stack adding windows/arm64
support (#36439), intended to land in the Go 1.17 cycle.
This CL is, however, not windows/arm64-specific.
It is cleanup meant to make the port (and future ports) easier.
Change-Id: Id1e3ef5e54f7ad786e4b87043f2626eba7c3bbd9
Reviewed-on: https://go-review.googlesource.com/c/go/+/288799
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
|
Unbreak the linux/riscv64 port by storing the zero value register to memory,
rather than the current code that is moving a zero intermediate to the stack
pointer register (ideally this should be caught by the assembler). This was
broken in CL#272568.
On riscv64 a zero immediate value cannot be moved directly to memory, rather
a register needs to be loaded with zero and then stored. Alternatively, the
the zero value register (aka X0) can be used directly.
Change-Id: Id57121541d50c9993cec5c2270b638b184ab9bc1
Reviewed-on: https://go-review.googlesource.com/c/go/+/292894
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
|
|
This change adds support for the new register ABI on amd64 to
reflect.(Value).Call. If internal/abi's register counts are non-zero,
reflect will try to set up arguments in registers on the Call path.
Note that because the register ABI becomes ABI0 with zero registers
available, this should keep working as it did before.
This change does not add any tests for the register ABI case because
there's no way to do so at the moment.
For #40724.
Change-Id: I8aa089a5aa5a31b72e56b3d9388dd3f82203985b
Reviewed-on: https://go-review.googlesource.com/c/go/+/272568
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
|
|
The runtime.gosave function is not used anywhere. Delete.
Note: there is also a gosave<> function, which is actually used
and not deleted.
Change-Id: I64149a7afdd217de26d1e6396233f2becfad7153
Reviewed-on: https://go-review.googlesource.com/c/go/+/289719
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
|
|
Fixes #36641
Change-Id: I51868d83ce341d78d33b221d184c5a5110c60d14
Reviewed-on: https://go-review.googlesource.com/c/go/+/263598
Trust: Joel Sing <joel@sing.id.au>
Run-TryBot: Joel Sing <joel@sing.id.au>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
|
Avoid saving unnecessary registers in gcWriteBarrier on riscv64, which also
removes references to X4 and X27 (TP and g registers).
Change-Id: I2854161dcdf0c6047a45347165371827dcf8c1cf
Reviewed-on: https://go-review.googlesource.com/c/go/+/265518
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
|
|
This redesigns the way calls work from C to exported Go functions. It
removes several steps from the call path, makes cmd/cgo no longer
sensitive to the Go calling convention, and eliminates the use of
reflectcall from cgo.
In order to avoid generating a large amount of FFI glue between the C
and Go ABIs, the cgo tool has long depended on generating a C function
that marshals the arguments into a struct, and then the actual ABI
switch happens in functions with fixed signatures that simply take a
pointer to this struct. In a way, this CL simply pushes this idea
further.
Currently, the cgo tool generates this argument struct in the exact
layout of the Go stack frame and depends on reflectcall to unpack it
into the appropriate Go call (even though it's actually
reflectcall'ing a function generated by cgo).
In this CL, we decouple this struct from the Go stack layout. Instead,
cgo generates a Go function that takes the struct, unpacks it, and
calls the exported function. Since this generated function has a
generic signature (like the rest of the call path), we don't need
reflectcall and can instead depend on the Go compiler itself to
implement the call to the exported Go function.
One complication is that syscall.NewCallback on Windows, which
converts a Go function into a C function pointer, depends on
cgocallback's current dynamic calling approach since the signatures of
the callbacks aren't known statically. For this specific case, we
continue to depend on reflectcall. Really, the current approach makes
some overly simplistic assumptions about translating the C ABI to the
Go ABI. Now we're at least in a much better position to do a proper
ABI translation.
For comparison, the current cgo call path looks like:
GoF (generated C function) ->
crosscall2 (in cgo/asm_*.s) ->
_cgoexp_GoF (generated Go function) ->
cgocallback (in asm_*.s) ->
cgocallback_gofunc (in asm_*.s) ->
cgocallbackg (in cgocall.go) ->
cgocallbackg1 (in cgocall.go) ->
reflectcall (in asm_*.s) ->
_cgoexpwrap_GoF (generated Go function) ->
p.GoF
Now the call path looks like:
GoF (generated C function) ->
crosscall2 (in cgo/asm_*.s) ->
cgocallback (in asm_*.s) ->
cgocallbackg (in cgocall.go) ->
cgocallbackg1 (in cgocall.go) ->
_cgoexp_GoF (generated Go function) ->
p.GoF
Notably:
1. We combine _cgoexp_GoF and _cgoexpwrap_GoF and move the combined
operation to the end of the sequence. This combined function also
handles reflectcall's previous role.
2. We combined cgocallback and cgocallback_gofunc since the only
purpose of having both was to convert a raw PC into a Go function
value. We instead construct the Go function value in cgocallbackg1.
3. cgocallbackg1 no longer reaches backwards through the stack to get
the arguments to cgocallback_gofunc. Instead, we just pass the
arguments down.
4. Currently, we need an explicit msanwrite to mark the results struct
as written because reflectcall doesn't do this. Now, the results are
written by regular Go assignments, so the Go compiler generates the
necessary MSAN annotations. This also means we no longer need to track
the size of the arguments frame.
Updates #40724, since now we don't need to teach cgo about the
register ABI or change how it uses reflectcall.
Change-Id: I7840489a2597962aeb670e0c1798a16a7359c94f
Reviewed-on: https://go-review.googlesource.com/c/go/+/258938
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
|
The original riscv64 port used the thread pointer (TP aka X4) register for
the g pointer, however this register is also used when TLS support is
required, resulting in a conflict (for example, when a signal is received
we have no way of readily knowing if X4 contains a pointer to the TCB or
a pointer to a g).
In order to support cgo, free up the X4 register by moving g to X27.
This unfortunately means that the X4 register is unused in non-cgo mode,
however the alternative is to not support cgo on this platform.
Update #36641
Change-Id: Idcaf3e8ccbe42972a1b8943aeefde7149d9c960a
Reviewed-on: https://go-review.googlesource.com/c/go/+/263477
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
|
Currently, runtime.call16 is defined and used only on 32-bit
architectures, while 64-bit architectures all start at call32 and go
up from there. This led to unnecessary complexity because call16's
prototype needed to be in a different file, separate from all of the
other call* prototypes, which in turn led to it getting out of sync
with the other call* prototypes. This CL adds call16 on 64-bit
architectures, bringing them all into sync, and moves the call16
prototype to live with the others.
Prior to CL 31655 (in 2016), call16 couldn't be implemented on 64-bit
architectures because it needed at least four words of argument space
to invoke "callwritebarrier" after copying back the results. CL 31655
changed the way call* invoked the write barrier in preparation for the
hybrid barrier; since the hybrid barrier had to be invoked prior to
copying back results, it needed a different solution that didn't reuse
call*'s stack space. At this point, call16 was no longer a problem on
64-bit, but we never added it. Until now.
Change-Id: Id10ade0e4f75c6ea76afa6229ddaee2b994c27dd
Reviewed-on: https://go-review.googlesource.com/c/go/+/259339
Trust: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
|
Use the actual RDTIME instruction, rather than a WORD.
Generated code is the same.
Change-Id: I6f6f5a1836eae2d05af34d4a22db2ede4fdcb458
Reviewed-on: https://go-review.googlesource.com/c/go/+/231997
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
|
This corrects backtraces in gdb, making the runtime gdb tests pass on
linux/riscv64.
Change-Id: Icdb71450f2ab58debb1fe18455793133108971d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/231998
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
|
Now that the other dependent offset has been identified, we can remove the
unnecessary ADDI instruction from the riscv64 call sequence (reducing it
to AUIPC+JALR, rather than the previous AUIPC+ADDI+JALR).
Change-Id: I348c4efb686f9f71ed1dd1d25fb9142a41230b0d
Reviewed-on: https://go-review.googlesource.com/c/go/+/216798
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
|
Based on riscv-go port.
Updates #27532
Change-Id: If522807a382130be3c8d40f4b4c1131d1de7c9e3
Reviewed-on: https://go-review.googlesource.com/c/go/+/204632
Run-TryBot: Joel Sing <joel@sing.id.au>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
|
