| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This commit adds clippy as a required step of the build process. To make
this possible, all existing clippy issues have been resolved.
|
|
This replaces the `font_size_modifier` stored on the `Term` struct with a `font_size` field.
With this change it is not necessary anymore to calculate the new font size from a delta but the current font size is always stored directly on the `Term` struct.
As a result of this it is now possible to increase the font size by more than 127 steps at runtime. It also limits the minimum font size to 1, so issues with the `font_size_modifier` dropping far below font size 1 are resolved with this change.
This fixes #955.
|
|
This resolves the remaining issue of #842.
|
|
|
|
Previously there were two separate but intended-to-be-identical
implementations. Now the two implementations simply delegate to a
single, shared method. This should help correctness issues in the
future.
|
|
|
|
When an atlas is full and the `insert` call fails, a new atlas should be
created. This is the current strategy, however the atlas is put at the
end of the vector, but the `current_atlas` index is set to 0, instead of
the last element. This leads to a recursion where it keeps trying to
insert into the full atlas at position 0 instead of the new at
`atlas.len() - 1`.
With this simple fix a stack-overflow is prevented because the new atlas
is inserted as the first element, which then will be used correctly for
loading new glyphs.
This fixes jwilm/alacritty/issues/842 and might also solve
jwilm/alacritty/issues/914 (I wasn't able to reproduce this with the
latest master).
|
|
(needless_pass_by_value, needless_borrow).
|
|
to "==".
|
|
Resolves #872
|
|
Since landing the patch adding transparency support to Alacritty,
there's been an issue where othewise solid background cells were also
being rendered partially transparent. Now, all filled background cells
are rendered fully opaque.
Some logic was added to support discarding filled backgrounds which had
the same color as the default background. This means that, if the
default background is #000 and a cell has that background, it will never
be rendered opaque. This may not be correct.
Note that many truecolor vim color schemes print spaces for default
colored background cells. Performance can be dramatically improved by
using ctermbg=NONE guibg=NONE to skip rendering those cells.
|
|
The source of the leak was loading up multiple copies of the FT_face
even when not necessary. Fonts are now appropriately cached for
FreeType when going through the `Rasterize::load_font` API.
Additionally, textures in the glyph cache are now reused.
The result of this is that resizing to already loaded fonts is free
from a memory consumption perspective.
|
|
Adds support for font resizing at run-time. Three new actions are
introduced:
* IncreaseFontSize - Increases current font size by 1.0
* DecreaseFontSize - Decreases current font size by 1.0
* ResetFontSize - Resets font size to that specified in the
configuration.
The stock config files have example configuration for each which should
match gnome-terminal. For convenience, the config entries are:
- { key: Key0, mods: Control, action: ResetFontSize }
- { key: Equals, mods: Control, action: IncreaseFontSize }
- { key: Subtract, mods: Control, action: DecreaseFontSize }
|
|
Because there are so many clippy warnings in the current codebase,
this commit removes '#![cfg_attr(feature = "clippy", deny(clippy))]',
to make it easier to fix warnings incrementally.
|
|
|
|
500ms introduced a visual lag between file save and display update.
|
|
|
|
The option is an Alpha struct that ensures that the contained float is
between 0.0 and 1.0. Background colors are multiplied by the opacity
to properly alpha blend them.
|
|
|
|
This reverts commit 3cdba291242cc1c1684bff7f8242262b1cdeb582.
On some systems, the target commit actually caused a massive performance
issue rather than fixing one.
|
|
The InstanceData type in the rendering subsystem was previously 16
floats which occupied a total of 64 bytes per instance. This meant that
for every character or background cell drawn, 64 bytes were sent to the
GPU. In the case of a 400x100 cell grid, a total of 2.5MB would be sent.
This patch reduces InstanceData's size to 26 bytes, a 60% improvement!
Using the above example for comparison, a worst case of 1MB would be
transferred.
The motivation for this patch comes from macOS. Once the terminal grid
would reach a certain size, performance experienced a sharp and dramatic
drop (render times would go from ~3ms to ~16ms). I don't want to
speculate too much on the underlying issue, but suffice it to say that
this patch alleviates the problem in my testing.
|
|
|
|
|
|
|
|
Padding can be configured by using the `padding` field in the config
file, like so:
padding:
x: 2
y: 2
which would result in a 2px padding within each side of the window.
|
|
We previously had a hard-coded value for aligning glyphs within cells.
The font descent is now used, and the offset should be correct by
default.
|
|
The two structs are very similar, so there is no reason for them to be
separate. Instead combine them into a single Delta struct, which can be
used to shift a point in a two dimensional plane.
|
|
Add the ability to move glyphs within their cells on a global basis via
an option in the configuration file.
|
|
The changes to metric consumption rendered the size argument
unnecessary, remove it.
|
|
The color list needs to be updated by the parser, and this isn't
possible if it's on the config. This change makes sense semantically as
well since it's really part of the terminal state.
This is in preparation for OSC color parsing.
|
|
This commit adds support for a visual bell. Although the Handler in src/ansi.rs
warns "Hopefully this is never implemented", I wanted to give it a try. A new
config option is added, `visual_bell`, which sets the `duration` and `animation`
function of the visual bell. The default `duration` is 150 ms, and the default
`animation` is `EaseOutExpo`. To disable the visual bell, set its duration to 0.
The visual bell is modeled by VisualBell in src/term/mod.rs. It has a method to
ring the bell, `ring`, and another method, `intensity`. Both return the
"intensity" of the bell, which ramps down from 1.0 to 0.0 at a rate set by
`duration` and `animation`.
Whether or not the Processor waits for events is now configurable in order to
allow for smooth drawing of the visual bell.
|
|
Loading a glyph from the cache is a very hot operation in the renderer.
The original implementation would first check if a glyph was loaded and
then call `get()` which would have to search a second time. This showed
up as a very slow point in profiles.
This patch addresses glyph cache access in two ways: by using a faster
hasher optimized for small keys (fnv), and by using the entry API for
fetching a cached glyph. The `fnv` hasher is faster than the default and
is very efficient for small keys. Using the entry API on the HashMap
means only 1 lookup instead of two. The entry API has a downside where
the key needs to get cloned on fetches.
Reducing the GlyphKey width to 64-bits helps in both areas. Copying an
8-byte wide type is very cheap and thus limits downside of the entry
API. The small width also helps with the hasher performance.
Over all, this patch reduced typical render times by several hundred
microseconds on a 2013 MacBook Pro with a full screen terminal full of
text.
|
|
|
|
|
|
|
|
This work started because we wanted to be able to simply say "monospace"
on Linux and have it give us some sort of font. The config format for
fonts changed to accomodate this new paradigm. As a result, italic and
bold can have different families from the normal (roman) face.
The fontconfig based font resolution probably works a lot better than
the CoreText version at this point. With CoreText, we simply iterate
over fonts and check it they match the requested properties. What's
worse is that the CoreText version requires a valid family. With
fontconfig, it will just provide the closest matching thing and use it
(unless a specific style is requested).
|
|
Shader initialization errors at startup should print a nice message now.
|
|
Resolves #22.
|
|
This allows consumers of the font crate to handle errors instead of the
library panicking.
|
|
Using underscores because it's easy. It's also wrong.
cc #11
|
|
|
|
All of the changes in this commit are due to clippy lints.
|
|
Adds a wrapper for the glutin::Window which provides strongly typed
APIs and more convenient interfaces. Moves some gl calls into the
opengl-based renderer.
The point of most of the changes here is to clean up main().
|
|
There's now a ColorList type that provides strongly typed indexing for
not only usize but NamedColor as well. Previously, the `NamedColor` was
casted to a `usize` when indexing the colors. Additionally, only one
copy of the ColorList needs to exist;it's borrowed from the `Config`
when rendering, and the renderer doesn't need a copy.
|
|
ANSI escape sequences like `\x1b[48;5;10m` were not supported until now.
Specifically, the second attribute, 5, says that the following attribute
is a color index.
The ref tests were updated since `enum Color` variants changed.
|
|
This probably should have been renamed in the original refactor, but oh
well. `render_cells()` takes a generic parameter `I` which is any
`Iterator<Item=IndexedCell>` and is thus no longer coupled to the grid
type. Renaming it reflects that.
|
|
The terminal now has a `renderable_cells()` function that returns a
`RenderableCellIter` iterator. This allows reuse of the cell selection
code by multiple renderers, makes it testable, and makes it
independently optimizable.
The render API now takes an `Iterator<Item=IndexedCell>` to support both
the new renderable cells iterator and the `render_string()` method which
generates its own iterator.
The `vim_large_window_scoll` ref test was added here because it provides
a nice large and busy grid to benchmark the cell selection with.
|
|
Ref tests use a recording of the terminal protocol and a serialization
of the grid state to check that the parsing and action handling systems
produce the correct result. Ref tests may be recorded by running
alacritty with `--ref-test` and closing the terminal by using the window
"X" button. At that point, the recording is fully written to disk, and a
serialization of important state is recorded. Those files should be
moved to an appropriate folder in the `tests/ref/` tree, and the
`ref_test!` macro invocation should be updated accordingly.
A couple of changes were necessary to make this work:
* Ref tests shouldn't create a pty; the pty was refactored out of the
`Term` type.
* Repeatable lines/cols were needed; on startup, the terminal is resized
* by default to 80x24 though that may be changed by passing
`--dimensions w h`.
* Calculating window size based on desired rows/columns and font metrics
required making load_font callable multiple times.
* Refactor types into library crate so they may be imported in an
integration test.
* A whole bunch of types needed symmetric serialization and
deserialization. Mostly this was just adding derives, but the custom
deserialization of Rgb had to change to a deserialize_with function.
This initially adds one ref test as a sanity check, and more will be
added in subsequent commits. This initial ref tests just starts the
terminal and runs `ll`.
|
|
There's an issue where drawing the cell backgrounds will overwrite part
of a neighboring glyph. The real solution here is to figure out glyph
metrics properly, but simply limiting to 2 draw calls per frame (first
background, then all the glyphs) makes the problem "go away".
|
