| Age | Commit message (Collapse) | Author |
|---|
|
Still a WIP because of unimplemented Linux portion.
Support has been added for font rasterization options. At this time, the
only supported option is antialias. It's a tri-state flag which can be
either ~ for "use default", true to force antialias, and false to force
disable antialias.
The options may be specified both globally and per font section. The per
font sections override global options. An example of a complex config
follows. In the example, the global value requests using default
antialias settings, and the normal face disables antialias.
font:
options:
antialias: ~
normal:
family: monospace
options:
antialias: false
Finally, note that the top level font.options is used for fallback
fonts.
|
|
|
|
|
|
Since landing the patch adding transparency support to Alacritty,
there's been an issue where othewise solid background cells were also
being rendered partially transparent. Now, all filled background cells
are rendered fully opaque.
Some logic was added to support discarding filled backgrounds which had
the same color as the default background. This means that, if the
default background is #000 and a cell has that background, it will never
be rendered opaque. This may not be correct.
Note that many truecolor vim color schemes print spaces for default
colored background cells. Performance can be dramatically improved by
using ctermbg=NONE guibg=NONE to skip rendering those cells.
|
|
|
|
Must have been broken when upgrading notify-rs
|
|
This shouldn't have any effect, but at least the default value is now
consistent with the default deserialization value.
|
|
Adds support for font resizing at run-time. Three new actions are
introduced:
* IncreaseFontSize - Increases current font size by 1.0
* DecreaseFontSize - Decreases current font size by 1.0
* ResetFontSize - Resets font size to that specified in the
configuration.
The stock config files have example configuration for each which should
match gnome-terminal. For convenience, the config entries are:
- { key: Key0, mods: Control, action: ResetFontSize }
- { key: Equals, mods: Control, action: IncreaseFontSize }
- { key: Subtract, mods: Control, action: DecreaseFontSize }
|
|
|
|
Rather than use DPI from config, use device-pixel-ratio from winit. This
is computed using the display DPI anyhow, so it should have the same
effect.
|
|
Because there are so many clippy warnings in the current codebase,
this commit removes '#![cfg_attr(feature = "clippy", deny(clippy))]',
to make it easier to fix warnings incrementally.
|
|
|
|
500ms introduced a visual lag between file save and display update.
|
|
|
|
|
|
This will keep the original behavior for users who don't update their
config.
|
|
Provide a command line option as well as a configuration file option.
The command line option takes precedence.
|
|
The option is an Alpha struct that ensures that the contained float is
between 0.0 and 1.0. Background colors are multiplied by the opacity
to properly alpha blend them.
|
|
* Update to latest Glutin/winit
This *finally* gets us off the fork of Glutin we've been on for so long
and will unblock a number of other items. Functionality should be the
same as before.
The update forced our hand on a compiler update. It's no longer
feasible to pin on an old version. From now on, we require latest
stable.
|
|
This should resolve an issue where config behind a symlink was not being
properly reloaded when edited.
|
|
Add support for the VTE 'dim' flag, with additional support for
custom-themed dim colors. If no color is specified in the config, it
will default to 2/3 the previous (not a spec, but the value other
terminals seem to use).
The actual dimming behavior brings bright colors to normal and regular
colors to the new dim ones. Custom RGB values are not changed, nor are
non-named indexed colors.
|
|
* Parse cli arguments before configuration file
Parsing the cli arguments before the configuration file allows `--help`
and `--version` to be used even if the configuration file is broken.
* Add configuration file to command line arguments
This commit adds a new command line flag `--config-file` to override the default
configuration file location. If the specified file is unavailable,
Alacritty will quit instead of generating a fallback. If the specified
file is invalid, i.e. /dev/null, the compiled in defaults will be loaded
instead.
|
|
Based on option `command` in key binding section in config, e.g.
- { key: N, mods: Control|Shift, command: alacritty }
# or
- {
key: N,
mods: Control|Shift,
command: {
program: "alacritty",
args: ["-e", "vttest"],
}}
specified command will be run in the background on key press. Alacritty
doesn't wait for its result nor block IO.
|
|
Padding can be configured by using the `padding` field in the config
file, like so:
padding:
x: 2
y: 2
which would result in a 2px padding within each side of the window.
|
|
The two structs are very similar, so there is no reason for them to be
separate. Instead combine them into a single Delta struct, which can be
used to shift a point in a two dimensional plane.
|
|
Add the ability to move glyphs within their cells on a global basis via
an option in the configuration file.
|
|
The font metrics function was using freetype metrics in an ineffective
way, improve the use of those metrics and remove the now unnecessary
separate default values for font offset in linux.
|
|
This changes the cursor color config to use the `text` and `cursor`
properties instead of the current `foreground` and `background`
properties. The latter names stop making sense when dealing with cursors
like a vertical bar or underscore. In the new system, the block,
underscore, or vertical bar would always take the color of `cursor`, and
the text would take the color of `text` when using a block, or keep its
normal color when using the underscore or vertical bar.
A warning is now emitted on startup when the old form of cursor color
config is used. This will be a hard error in the future.
|
|
|
|
|
|
The color list needs to be updated by the parser, and this isn't
possible if it's on the config. This change makes sense semantically as
well since it's really part of the terminal state.
This is in preparation for OSC color parsing.
|
|
Much nicer error message than with Debug.
|
|
This commit adds support for a visual bell. Although the Handler in src/ansi.rs
warns "Hopefully this is never implemented", I wanted to give it a try. A new
config option is added, `visual_bell`, which sets the `duration` and `animation`
function of the visual bell. The default `duration` is 150 ms, and the default
`animation` is `EaseOutExpo`. To disable the visual bell, set its duration to 0.
The visual bell is modeled by VisualBell in src/term/mod.rs. It has a method to
ring the bell, `ring`, and another method, `intensity`. Both return the
"intensity" of the bell, which ramps down from 1.0 to 0.0 at a rate set by
`duration` and `animation`.
Whether or not the Processor waits for events is now configurable in order to
allow for smooth drawing of the visual bell.
|
|
Fix tests and add line select
Refactor BidirectionalIter to remove if blocks
Allow for cells tagged with WRAPLINE to continue expanding the selection
Reorganize config into structs
Add test coverage that callbacks are called
Cleanup mouse config
- Uses Duration type for ClickHandler::threshold
- Removes `action` property from ClickHandler--this can be added in a
backwards compatible way later on
- Renames ClickState::DblClick to DoubleClick
fixup! Cleanup mouse config
|
|
Adds a configuration option `dimensions` which will set initial
window size by columns and lines. Changes to the config file will
require restart.
resolves #370
|
|
Adds a new "Quit" action and binds it to Cmd-W and Cmd-Q on Mac OS in an
attempt to make Alacritty feel more like a "normal" citizen of the
operating system. Alternatives like Ctrl-D are okay, but I usually want
to leave my shells nested within Tmux open even if I exit my terminal.
It's also largely selfish: I've built up muscle memory over the years
that takes my fingers to Cmd-Q first (and I suspect I'm not the only
one).
The implementation for an exit is copied from `event.rs` which notably
is already tagged with a FIXME. It seems that `tty.rs` contains a
`process_should_exit` system to help handle a `SIGCHLD`, and it's
possible that these two exit implementations should be merged together.
I could probably tackle that as my next project.
As mentioned in #218, Alacritty can't really spawn other windows right
now, so I've tied in Cmd-W as simply another synonym for quitting until
that's implemented.
Fixes #218.
|
|
|
|
There was no default supplied for Colors.cursor. This caused config
not specifying that property to break. Adding a default should fix that.
|
|
|
|
|
|
|
|
This commit implements the following syntax in the config file:
```yaml
shell:
program: /bin/bash
args:
- --login
- --norc
```
|
|
|
|
|
|
Makes thin stroke rendering for darwin configurable by a new toplevel
key under `font:` in the config file. Defaults to false, has no impact
on non macos.
|
|
- Added note about the default file created if no path is found
|
|
- Update README to reflect changes
|
|
- Use $XDG_CONFIG_HOME/alacritty/alacritty.yml for loading the
configuration file falling back to $HOME/.config/alacritty/alacritty.yml
- Closes #203
|
|
Add "shell" option to config
|
|
|
