| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This resolves a rounding issue when converting to the 26.6 format used
by freetype for character sizes.
This rounding behavior is taken from cairo:
https://gitlab.freedesktop.org/cairo/cairo/-/blob/master/src/cairo-ft-font.c#L900-903
There are various different implementations of the F26Dot6 conversion
online, but the rounding that cairo does seems to be the most common.
Since cairo is very commonly used, it should produce good results
compared with the rest of Linux text rendering.
Fixes #2780.
Co-authored-by: Christian Duerr <contact@christianduerr.com>
Co-authored-by: Kirill Chibisov <contact@kchibisov.com>
|
|
|
|
In addition it also starts respecting Fontconfig's `autohint`
and `hinting` options.
Fixes #3534.
|
|
Fixes #3915.
|
|
Keeping the license as part of every file bloats up the files
unnecessarily and introduces an additional overhead to the creation of
new modules.
Since cargo already provides excellent dependency management, most of
the code-reuse of Alacritty should occur through Rust's dependency
management instead of copying it source.
If code is copied partially, copying the license from the main license
file should be just as easy as copying from the top of the file and
making some adjustments based on where it is used is likely necessary
anyways.
|
|
Fixes #1754.
|
|
|
|
|
|
Since there were some problems with clippy suggesting changes that were
not yet available in the oldest supported Rust compiler of Alacritty,
the clippy stage has been moved from stable to 1.37.0.
|
|
This resolves an issue with the selection clamping, where no selection
would be rendered at all when the start was above the viewport while the
end was below it.
|
|
|
|
We can't reliably do that, because some fonts are bitmap,
but marked as scalable by Fontconfig.
Fixes #3387.
|
|
|
|
Previously we were rounding pattern's `pixelsize` before `fc_sort`, however we were using not rounded one in `get_glyph`, so bitmap fonts could look a bit smaller when used in a mix with scalable fonts.
|
|
Fixes regression introduced in 6b327b6f8f0f308ff8f46cdf551ce0d0f3eda60b.
Fixes #3355.
|
|
Fixes resize regression from 15cc07c069b09f109ed18fb94e02e9650be7fa33.
|
|
Fixes #3257.
|
|
Previous implementation was querying Fontconfig using `charset` in a pattern,
which was leading to unpredictable fallbacks in some cases, since Fontconfig
was picking the font with the most coverage for a given charset, regardless of
user configuration. Moreover all fallback was based on font_match which is
extremely slow for such performance sensitive task as a fallback, so alacritty
had a hard times on vtebench's unicode-random-write.
The new approach is to use some internal fallback list from font_sort
and iterate over it to get a proper fallback font, since it matches the
following example query from `fc-match`:
`fc-match -s "monospace:pixelsize=X:style=Y"
That being said it's more intuitive for users to setup their system Fontconfig
fallback, and also most applications are doing similar things. Moreover the new
implementation uses internal caches over Fontconfig API when possible and
performs font matches only once during load of requested font with font_sort,
which leads to dramatically improved performance on already mentioned
vtebench's unicode-random-write.
Fixes #3176.
Fixes #3134.
Fixes #2657.
Fixes #1560.
Fixes #965.
Fixes #511.
|
|
Fixes #3235.
|
|
Clippy[1] says that `.next()` is more readable than `.nth(0)`.
[1]: https://rust-lang.github.io/rust-clippy/master/index.html#iter_nth_zero
|
|
|
|
|
|
Fixes #153.
|
|
|
|
This takes the latest glutin master to port Alacritty to the EventLoop
2.0 rework.
This changes a big part of the event loop handling by pushing the event
loop in a separate thread from the renderer and running both in
parallel.
Fixes #2796.
Fixes #2694.
Fixes #2643.
Fixes #2625.
Fixes #2618.
Fixes #2601.
Fixes #2564.
Fixes #2456.
Fixes #2438.
Fixes #2334.
Fixes #2254.
Fixes #2217.
Fixes #1789.
Fixes #1750.
Fixes #1125.
|
|
Fixes #2655.
|
|
|
|
|
|
This fixes a recent regression in
cfc20d4f34dca535654cc32df18e785296af4cc5 which broke cursor colors when
specified in the `colors.cursor` field in the config.
It also removes a lot of unneeded code from the font crate related to
the cursor rendering.
This fixes #2338.
|
|
By setting the minimum Rust version and enforcing it with CI, Alacritty
should hopefully make it possible for maintainers to package the
application even on distributions which are not rolling release.
The 1.31.0 target has been chosen here because it's the first version of
the Rust 2018 release. Bumping this version in the future should be
considered to be a breaking change and should only be done with caution
and in consideration of the supported Rust versions of the major
distributions available.
This fixes #2277.
|
|
|
|
|
|
The general style for errors, warnings and info messages is to start
with a capitalized letter and end without a period. The main exception
is when dealing with nouns that are clearer with special case handling,
e.g. "macOS failed to work" or "ioctl is borked".
|
|
Since bitmap fonts do not provide their own underline metrics, the
self-calculated metrics which have been used for rusttype are now also
used for bitmap fonts with freetype.
The rusttype and bitmap fallback metrics have incorrectly offset the
underline by the underline height. Since the position is already defined
as the center point, that is not necessary.
All rounding and clamping has also been removed from the font library,
so that the raw values are reported now. The clamping and rounding is
now done in the line renderer.
|
|
This makes use of the new rectangle rendering methods used to display
the colored visual bell to add proper underline and strikeout support to
Alacritty.
|
|
This resolves a lot of NLL issues, however full NLL will be necessary to
handle a couple of remaining issues.
|
|
Some changes include:
• Use the with_hardware_acceleration function on the ContextBuilder to not require the discrete GPU
• Remove the LMenu and RMenu virtual key codes (winit 0.16.0 removed these because Windows now generates LAlt and RAlt instead
• Replace set_cursor_state with hide_cursor (winit 0.16.0 removed the set_cursor_state function)
• Replace GlWindow::hidpi_factor with GlWindow::get_hidpi_factor and change to expecting an f64
• Use the glutin/winit dpi size and position types where possible
Glutin's dpi change event has been implemented. All size events now
return logical sizes. As a result of that, the logical sizes are translated
in the `display::handle_rezize` method so DPI scaling works correctly.
When the DPI is changed, the glyph cache is updated to make use of the
correct font size again.
Moving a window to a different screen which is a different DPI caused a
racing condition where the logical size of the event was sent to the
`handle_resize` method in `src/display.rs`, however if there was a DPI
change event before `handle_resize` is able to process this message, it
would incorrectly use the new DPI to scale the resize event.
To solve this issue instead of sending the logical size to the
`handle_resize` method and then converting it to a physical size in
there, the `LogicalSize` of the resize event is transformed into a
`PhysicalSize` as soon as it's received. This fixes potential racing
conditions since all events are processed in order.
The padding has been changed so it's also scaled by DPR.
The `scale_with_dpi` config option has been removed. If it's not present
a warning will be emitted.
The `winit` dependency on Windows has been removed. All interactions
with winit in Alacritty are handled through glutin.
|
|
This resolves all existing clippy issues and removes some old `allow`
annotations which aren't neccesary anymore.
|
|
Initial support for Windows is implemented using the winpty translation
layer. Clipboard support for Windows is provided through the `clipboard`
crate, and font rasterization is provided by RustType.
The tty.rs file has been split into OS-specific files to separate
standard pty handling from the winpty implementation.
Several binary components are fetched via build script on windows
including libclang and winpty. These could be integrated more directly
in the future either by building those dependencies as part of the
Alacritty build process or by leveraging git lfs to store the artifacts.
Fixes #28.
|
|
The patch uses the Cargo.toml patch section to force a single downstream
choice of freetype-sys instead of relying on forks of other crates. It
also bumps the fontconfig/freetype dependencies in the process.
|
|
|
|
This fixes some existing clippy issues and runs the `font` tests through travis.
Testing of copypasta crate was omitted due to problens when running on headless travis-ci environment (x11 clipboard would fail).
|
|
|
|
Enabled clippy in the sub-crates font and copypasta. All issues
that were discovered by this change have also been fixed.
|
|
|
|
Using clippy as a library has been deprecated, instead the `cargo
clippy` command should be used instead. To comply with this change
clippy has been removed from the `Cargo.toml` and is now installed with
cargo when building in CI.
This has also lead to a few new clippy issues to show up, this includes
everything in the `font` subdirectory. This has been fixed and `font`
should now be covered by clippy CI too.
This also upgrades all dependencies, as a result this fixes #1341 and
this fixes #1344.
|
|
This should fix #1020, #710, and #902
|
|
Moved the custom cursor block on ft to the top, so no unnecessary
operations are executed when trying to draw a custom cursor glyph.
|
|
Previously it was assumed that the font_key for the normal font is
always 0, because this assumption was a bit of a stretch, now the
font_key provided with the glyph is used. This is always the bold,
italics or normal font associated with the cell.
|
