| Age | Commit message (Collapse) | Author |
|---|
|
This is only an update to the development version and does not represent
a stable release.
|
|
This commit fixes the issue that when attempting to write zerowidth
characters into the last column, it is written in the second to last
column instead.
Fixes #4227.
Co-authored-by: Christian Duerr <contact@christianduerr.com>
|
|
|
|
This removes the restriction of not being able to select text while the
search is active, making it a bit less jarring of a UX when the user
tries to interact with the terminal during search.
Since the selection was used during vi-less search to highlight the
focused match, there is now an option for a focused match color, which
uses the inverted normal match color by default. This focused match is
used for both search modes.
Other mouse interactions are now also possible during search, like
opening URLs or clicking inside of mouse mode applications.
|
|
Commit ec42b42ce601808070462111c0c28edb0e89babb added an optional
pointer for each cell, thus some old code that was optimizing copying
with 'ptr::copy' was duplicating "unique" pointers ('Box'), which was
resulting in use after free, after attempting to free both of these
pointers.
By replacing these unsafe blocks with safe Rust, the issue itself is
fixed and the potential for future memory problems is eliminated from
this area of the code.
|
|
|
|
The zerowidth characters were conventionally stored in a [char; 5].
This creates problems both by limiting the maximum number of zerowidth
characters and by increasing the cell size beyond what is necessary even
when no zerowidth characters are used.
Instead of storing zerowidth characters as a slice, a new CellExtra
struct is introduced which can store arbitrary optional cell data that
is rarely required. Since this is stored behind an optional pointer
(Option<Box<CellExtra>>), the initialization and dropping in the case
of no extra data are extremely cheap and the size penalty to cells
without this extra data is limited to 8 instead of 20 bytes.
The most noticible difference with this PR should be a reduction in
memory size of up to at least 30% (1.06G -> 733M, 100k scrollback, 72
lines, 280 columns). Since the zerowidth characters are now stored
dynamically, the limit of 5 per cell is also no longer present.
|
|
It should simplify tracking of new warnings raised on CI builds
and when cross checking. This commit also enables warnings
for 'rust_2018_idioms' and 'future_incompatible'.
|
|
|
|
Teach Alacritty to stop setting the window as urgent upon a bell by
emulating xterm's 'bellIsUrgent' resource and relevant CSI. When this
resource is enabled (with 'CSI ? 1042 h'), a bell event causes the
window to be marked as urgent. When the resource is disabled (with 'CSI
? 1042 l'), the window is not marked urgent in the event of a bell.
There are two wrinkles worth noting here:
- The 'TermMode::URGENCY_HINTS' does _not_ affect the terminal's
configured bell command, since we only want to control whether or
not the window is marked as urgent, not anything else.
- In xterm, the 'bellIsUrgent' resource is _disabled_ by default.
Since bouncing the dock icon has been the default in Alacritty on
macOS thus far, do not make an effort to change that in this patch.
This allows users to emit "\e[?1042l" and disable bouncing the dock
icon.
Fixes #2950.
|
|
Fixes #4206.
Fixes #4162.
Fixes #4017.
Fixes #3998.
Fixes #3831.
Fixes #3782.
Fixes #3708.
Fixes #2734.
Fixes #2714.
Fixes #1801.
|
|
This changes the minimum terminal dimensions from 2 lines and 2 columns,
to 1 line and 2 columns.
This also reworks the `SizeInfo` to store the number of columns and
lines and consistently has only the terminal lines/columns stored,
instead of including the message bar and search in some places of the
Alacritty renderer/input.
These new changes also make it easy to properly start the selection
scrolling as soon as the mouse is over the message bar, instead of
waiting until it is beyond it.
Fixes #4207.
Co-authored-by: Christian Duerr <contact@christianduerr.com>
|
|
When doing selection expansion we were checking for wide char flags
on a cells from the bottom of the terminal instead of in a current
viewport when scrolled up in history, which was leading to expanding
more than needed if we had wide chars on the same viewport cell,
but in the bottom of the terminal.
Fixes #4257.
|
|
|
|
Co-authored-by: Christian Duerr <contact@christianduerr.com>
|
|
Co-authored-by: Christian Duerr <contact@christianduerr.com>
|
|
This implements the escapes `CSI 14 t` and `CSI 18 t` which report the
text area size in pixels and characters.
|
|
Since the `Term` implements the `Dimensions` trait itself, we shouldn't
call `term.grid()` to call methods from the `Dimensions` trait.
This removes all instances of this that I could find in the code at the
moment.
|
|
This adds the ability for users to have multiple configuration files
which all inherit from each other.
The order of imports is chronological, branching out to the deepest
children first and overriding every field with that of the configuration
files that are loaded at a later point in time.
Live config reload watches the directories of all configuration files,
allowing edits in any of them to update Alacritty immediately. While the
imports are live reloaded, a new configuration file watcher will only be
spawned once Alacritty is restarted.
Since this might cause loops which would be very difficult to detect, a
maximum depth is set to limit the recursion possible with nested
configuration files.
Fixes #779.
|
|
This commit completes the effort to use config colors for
message bar content by picking red/yellow from user's
colors.normal.{red,yellow} for error/warning messages
instead of fixed colors.
It also removes alacritty_terminal::term::color::RED and
alacritty_terminal::term::color::YELLOW from the alacritty_terminal API,
bumping its version to 0.11.0-dev.
Fixes #4116.
|
|
This adds support for double underlines using the colon separated escape
sequence `CSI 4 : 2 m`.
Alacritty will now also always fallback to the normal underline in case
any of the other underlines like the undercurl are specified. The escape
sequence `CSI 4 : 0 m` can now be used to clear all underlines.
Some terminals support `CSI 21 m` for double underline, but since
Alacritty already uses that as cancel bold which is a little more
consistent, that behavior has not changed. So the colon separated
variant must be used.
|
|
This resolves an issue where Alacritty would crash when a wrapline flag
was present in the last column of the last line.
While it should not be possible to achieve this with normal text flow,
it is possible to rotate the content downwards using the `CSI Ps T`
escape, causing this bug to occur.
This also works around other issues like the vi cursor jumping to the
top of the screen when trying to move beyond the last column using the
`l` key. In debug mode this even lead to a crash due to the overflow.
Fixes #4109.
|
|
This implements the colon separated form of SGR 38 and 48.
Fixes #1485.
|
|
Fixes #4082.
|
|
|
|
This commit fixes regression introduced in
bedf5f3004e8f33011925ca471be02ead96f4581, when setting
certain CellForeground/CellBackground combinations stoppped working.
|
|
This should reduce the number of times people with fixed cursor colors
run into troubles when existing text is already colored.
Using just the background color as a metric instead of both background
and foreground color should ensure that the cursor still has a clear
shape, since just changing the foreground color for a cursor might be
difficult to see. Always inverting the entire cursor instead of keeping
the fixed foreground color is important to make sure the contrast isn't
messed up.
Fixes #4016.
|
|
This adds support for the secondary DA escape sequence response.
Alacritty's version is formatted allowing for up to 99 minor and patch
versions, which should be sufficient.
The tertiary DA is intentionally not implemented and marked as rejected
in the documentation, since a lot of terminals do not support it, or
report useless data (XTerm/URxvt/Kitty).
Fixes #3100.
|
|
|
|
This change bumps the version of the `alacritty_terminal` crate to force
it out of sync with the Alacritty application. Since it is a library
that will be published on crates.io, it should be following semver
rather than our binary's release version.
While it would be possible to just keep it at 0.5.0, explicitly
disconnecting it from the Alacritty version should give it a clean
starting-off point and prevent unnecessary confusion. Bumping it to
0.10.0 instead of something like 0.6.0 should allow for a nice gap
between the different versions without being too arbitrary. Changing the
version to 0.1.0 is not an option since decreasing semver version would
likely cause a lot of problems.
While it would be possible to further separate the Alacritty terminal
library from the Alacritty terminal emulator, by renaming it from
`alacritty_terminal` to something different, I don't think that is
necessary or a good idea at the moment. Even though the
`alacritty_terminal` library *can* be used for other terminals, its
primary goal is still to support the Alacritty terminal emulator and I
don't see that changing. So making that clear in its name seems like a
good idea. Since there is no plan to maintain this library separately
from Alacritty, but to keep both tied together, the naming should
reflect this.
|
|
This implements search without vi mode by using the selection to track
the active search match and advancing it on user input. The keys to go
to the next or previous match are not configurable and are bound to
enter and shift enter based on Firefox's behavior.
Fixes #3937.
|
|
This resolves three different issues with cursor reflow.
The first issue was that the cursor could reach the top of the screen
during reflow, since content was pushed into history despite viewport
space being available. Since the cursor cannot leave the viewport, this
would insert new space between the cursor and content (see #3968).
Another issue was that the wrapline flag was not set correctly with
content being available behind the cursor. Since the cursor is not
necessarily at the end of the line, it is possible that the cursor
should reflow to the next line instead of staying on the current one and
setting the wrapline flag.
The last bug fixed in this is about reflow with content available behind
the cursor. Since that might have en effect on new lines being inserted
and deleted below the cursor, the cursor needs to be reflown based on
it.
Fixes #3968.
|
|
Instead of just always falling back to the shell specified in the passwd
file when no config or cli shell was specified, Alacritty will not first
look at the `$SHELL` environment variable. If this is unset, it will
still read the passwd file.
Since macOS is a bit peculiar and does not set the `$SHELL` environment
variable by default, it is set manually to the shell used by Alacritty
while any existing `$SHELL` variables are ignored. This matches the
behavior of iTerm and Terminal.app.
Co-authored-by: Christian Duerr <contact@christianduerr.com>
|
|
Fixes #3960.
|
|
This commit removes font dependency from alacritty_terminal,
so it'll simplify the usage of alacritty_terminal as a library,
since you won't link to system's libraries anymore. It also
moves many alacritty related config options from it.
Fixes #3393.
|
|
Fixes #1528.
|
|
Statically linking Fontconfig was leading to slow startup and
various errors, so forcing the use of system's library.
|
|
This adds a new regex search which allows searching the entire
scrollback and jumping between matches using the vi mode.
All visible matches should be highlighted unless their lines are
excessively long. This should help with performance since highlighting
is done during render time.
Fixes #1017.
|
|
To make sure that output is consistent even while resizing the window,
the cursor will now reflow with the content whenever the window size is
changed.
Since the saved cursor is more likely to represent a position in the
grid rather than a reference to the content below it and handling of
resize before jumping back to it is more likely than with the primary
cursor, no reflow is performed for the saved cursor
The primary cursor is unfortunately always reflowed automatically by
shells like zsh, which has always caused problems like duplicating parts
of the prompt and stretching it out "infinitely". Since the cursor is
now reflowed appropriately the duplication of the shell prompt should be
reduced, however it is possible that the shell moves the cursor up one
line after it has already been reflowed, which will cause a line of
history to be deleted if there is no duplicated prompt line above the
reflowed prompt. Since this behavior is identical in VTE and Kitty, no
attempt is made to work around it in this patch.
Fixes #3584.
|
|
This resolves several problems with handling of the saved cursor when
switching between primary and alternate screen. Additionally ref-tests
are also added for all common interactions to make sure the behavior
does not regress.
The behavior is based on XTerm's behavior except for interaction with
`reset`. XTerm does not reset the alternate screen's saved cursor on
`reset`, but VTE does. Since a `reset` should reset as much as possible,
Alacritty copies VTE here instead of XTerm.
|
|
While neither VTE, URxvt nor Kitty handle this, preserving the linewrap
flag across alternate screen switches seems like the correct thing to
do. XTerm also does handle this correctly, which indicates that it is a
bug and not a feature.
|
|
Fixes #3440.
|
|
This bug was caused by trying to grow the terminal while the cursor line
was wrapped but entirely empty. Resizing the terminal now accounts for
the position of the deleted line and moves the cursor up only when the
line deleted was above it.
The deletion of the line was caused by the shell redrawing itself
whenever the cursor is moved.
Fixes #3583.
|
|
Fixes #3766.
|
|
Since the alt_grid is not always the alternate screen buffer, the name
inactive_grid should fit much better.
Fixes #3504.
|
|
Selection is now cleared if clear line or clear screen escape sequences
are clearing content behind it.
|
|
This works around a bug where the optimized version of the
`Grid::scroll_down` function would just rotate the entire grid down if
the scrolling region starts at the top of the screen, even if there is
history available.
Since rotations of scrolling regions should not affect the scrollback
history, this optimized version is now only called when the max
scrollback size is 0, making it impossible for the grid to have any
history while it is used.
Since the main usecase of this is the alternate screen buffer, which
never has any history, the performance should not be affected negatively
by this change.
Fixes #3582.
|
|
This adds a new `Scheduler` which allows for staging events to be
processed at a later time.
If there is a selection active and the mouse is above or below the
window, the viewport will now scroll torwards the direction of the
mouse. The amount of lines scrolled depends on the distance of the mouse
to the boundaries used for selection scrolling.
To make it possible to scroll while in fullscreen, the selection
scrolling area includes the padding of the window and is at least 5
pixels high in case there is not enough padding present.
|
|
|
|
|
