Filename: 199-bridgefinder-integration.txt Title: Integration of BridgeFinder and BridgeFinderHelper Author: Mike Perry Created: 18-03-2012 Status: OBSOLETE Overview This proposal describes how the Tor client software can interact with an external program that performs bridge discovery based on user input or information extracted from a web page, QR Code, online game, or other transmission medium. Scope and Audience This document describes how all of the components involved in bridge discovery communicate this information to the rest of the Tor software. The mechanisms of bridge discovery are not discussed, though the design aims to be generalized enough to allow arbitrary new discovery mechanisms to be added at any time. This document is also written with the hope that those who wish to implement BridgeFinder components and BridgeFinderHelpers can get started immediately after a read of this proposal, so that development of bridge discovery mechanisms can proceed in parallel to supporting functionality improvements in the Tor client software. Components and Responsibilities 0. Tor Client The Tor Client is the piece of software that connects to the Tor network (optionally using bridges) and provides a SOCKS proxy for use by the user. In initial implementations, the Tor Client will support only standard bridges. In later implementations, it is expected to support pluggable transports as defined by Proposal 180. 1. Tor Control Port The Tor Control Port provides commands to perform operations, configuration, and to obtain status information. It also optionally provides event driven status updates. In initial implementations, it will be used directly by BridgeFinder to configure bridge information via GETINFO and SETCONF. It is covered by control-spec.txt in the tor-specs git repository. In later implementations, it will support the inter-controller POSTMESSAGE IPC protocol as defined by Proposal 197 for use in conveying bridge information to the Primary Controller. 2. Primary Controller The Primary Controller is the program that launches and configures the Tor client, and monitors its status. On desktop platforms, this program is Vidalia, and it also launches the Tor Browser. On Android, this program is Orbot. Orbot does not launch a browser. On all platforms, this proposal requires that the Primary Controller will launch one or more BridgeFinder child processes and provide them with authentication information through the environment variables TOR_CONTROL_PORT and TOR_CONTROL_PASSWD. In later implementations, the Primary Controller will be expected to receive Bridge configuration information via the free-form POSTMESSAGE protocol from Proposal 197, validate that information, and hold that information for user approval. 3. BridgeFinder A BridgeFinder is a program that discovers bridges and configures Tor to use them. In initial implementations, it is likely to be very dumb, and its main purpose will be to serve as a layer of abstraction that should free the Primary Controller from having to directly implement numerous ways of retrieving bridges for various pluggable transports. In later implementations, it may perform arbitrary network operations to discover, authenticate to, and/or verify bridges, possibly using informational hints provided by one or more external BridgeFinderHelpers (see next component). It could even go so far as to download new pluggable transport plugins and/or transform definition files from arbitrary urls. It will be launched by the Primary Controller and given access to the Tor Control Port via the environment variables TOR_CONTROL_PORT and TOR_CONTROL_PASSWD. Initial control port interactions can be command driven via GETINFO and SETCONF, and do not need to subscribe to or process control port events. Later implementations will use POSTMESSAGE as defined in Proposal 197 to pass command requests to Vidalia, which will parse them and ask for user confirmation before deploying them. Use of POSTMESSAGE may or may not require event driven operation, depending on POSTMESSAGE implementation status (POSTMESSAGE is designed to support both command and event driven operation, but it is possible event driven operation will happen first). 4. BridgeFinderHelper Each BridgeFinder implementation can optionally communicate with one or more BridgeFinderHelpers. BridgeFinderHelpers are plugins to external 3rd party applications that can inspect traffic, handle mime types, or implement protocol handlers for accepting bridge discovery information to pass to BridgeFinder. Example 3rd party applications include Chrome, World of Warcraft, QR Code readers, or simple cut and paste. Due to the arbitrary nature of sandboxing that may be present in various BridgeFinderHelper host applications, we do not mandate the exact nature of the IPC between BridgeFinder instances and external BridgeFinderHelper addons. However, please see the "Security Concerns" section for common pitfalls to avoid. 5. Tor Browser This is the browser the user uses with Tor. It is not useful until Tor is properly configured to use bridges. It fails closed. It is not expected to run BridgeFinderHelper plugin instances, unless those plugin instances exist to ensure the user always has a pool of working bridges available after successfully configuring an initial bridge. Once all bridges fail, the Tor Browser is useless. 6. Non-Tor Browser (aka BridgeFinderHelper host) This is the program the user uses for normal Internet activity to obtain bridges via a BridgeFinderHelper plugin. It does not have to be a browser. In advanced scenarios, this component may not be a browser at all, but may be a program such as World of Warcraft instead. Incremental Deployability The system is designed to be incrementally deployable: Simple designs should be possible to develop and test immediately. The design is flexible enough to be easily upgraded as more advanced features become available from both Tor and new pluggable transports. Initial Implementation In the simplest possible initial implementation, BridgeFinder will only discover Tor Bridges as they are deployed today. It will use the Tor Control Port to configure these bridges directly via the SETCONF command. It may or may not receive bridge information from a BridgeFinderHelper. In an even more degenerate case, BridgeFinderHelper may even be Vidalia or Orbot itself, acting upon user input from cut and paste. Initial Implementation: BridgeFinder Launch In the initial implementation, the Primary Controller will launch one or more BridgeFinders, providing control port authentication information to them through the environment variables TOR_CONTROL_PORT and TOR_CONTROL_PASSWD. BridgeFinder will then directly connect to the control port and authenticate. Initial implementations should be able to function without using SETEVENTS, and instead only using command-based status inquiries and configuration (GETINFO and SETCONF). Initial Implementation: Obtaining Bridge Hint Information In the initial implementation, to test functionality, BridgeFinderHelper can simply scrape bridges directly from https://bridges.torproject.org. In slightly more advanced implementations, a BridgeFinderHelper instance may be written for use in the user's Non-Tor Browser. This plugin could extract bridges from images, html comments, and other material present in ad banners and slack space on unrelated pages. BridgeFinderHelper would then communicate with the appropriate BridgeFinder instance over an acceptable IPC mechanism. This proposal does not seek to specify the nature of that IPC channel (because BridgeFinderHelper may be arbitrarily constrained due to host application sandboxing), but we do make several security recommendations under the section "Security Concerns: BridgeFinder and BridgeFinderHelper". Initial Implementation: Configuring New Bridges In the initial implementation, Bridge configuration will be done directly though the control port using the SETCONF command. Initial implementations will support only retrieval and configuration of standard Tor Bridges. These are configured using SETCONF on the Tor Control Port as follows: SETCONF Bridge="IP:ORPort [fingerprint]" Future Implementations In future implementations, the system can incrementally evolve in a few different directions. As new pluggable transports are created, it is conceivable that BridgeFinder may want to download new plugin binaries (and/or new transport transform definition files) and provide them to Tor. Furthermore, it may prove simpler to deploy multiple concurrent BridgeFinder+BridgeFinderHelper pairs as opposed to adding new functionality to existing prototypes. Finally, it is desirable for BridgeFinder to obtain approval from the user before updating bridge configuration, especially for cases where BridgeFinderHelper is automatically discovering bridges in-band during Non-Tor activity. The exact mechanisms for accomplishing these improvements is described in the following subsections. Future Implementations: BridgeFinder Launch and POSTMESSAGE handshake The nature of the BridgeFinder launch and the environment variables provided is not expected to change. However, future Primary Controller implementations may decide to launch more than one BridgeFinder instance side by side. Additionally, to negotiate the IPC channel created by Proposal 197 for purposes of providing user confirmation, it is recommended that BridgeFinder and the Primary Controller perform a handshake using POSTMESSAGE upon launch, to establish that all parties properly support the feature: Primary Controller: "POSTMESSAGE @all Controller wants POSTMESSAGE v1.1" BridgeFinder: "POSTMESSAGE @all BridgeFinder has POSTMESSAGE v1.0" Primary Controller: "POSTMESSAGE @all Controller expects POSTMESSAGE v1.0" BridgeFinder: "POSTMESSAGE @all BridgeFinder will POSTMESSAGE v1.0" If this 4 step handshake proceeds with an acceptable version, BridgeFinder must use POSTMESSAGE to transmit SETCONF Bridge lines (see "Future Implementations: Configuring New Bridges" below). If POSTMESSAGE support is expected, but the handshake does not complete for any reason, BridgeFinder should either exit or go dormant. The exact nature of the version negotiation and exactly how much backwards compatibility must be tolerated is unspecified. "All-or-nothing" is a safe assumption to get started. Future Implementations: Obtaining Bridge Hint Information Future BridgeFinder implementations may download additional information based on what is provided by BridgeFinderHelper. They may fetch pluggable transport plugins, transformation parameters, and other material. Future Implementations: Configuring New Bridges Future implementations will be concerned with providing two new pieces of functionality with respect to configuring bridges: configuring pluggable transports, and properly prompting the user before altering Tor configuration. There are two ways to tell Tor clients about pluggable transports (as defined in Proposal 180). On the control port, an external Proposal 180 transport will be configured with SETCONF ClientTransportPlugin= socks5 [auth=X] as in SETCONF ClientTransportPlugin="trebuchet socks5 127.0.0.1:9999". A managed proxy is configured with SETCONF ClientTransportPlugin= exec [options] as in SETCONF ClientTransportPlugin="trebuchet exec /usr/libexec/trebuchet --managed". This example tells Tor to launch an external program to provide a socks proxy for 'trebuchet' connections. The Tor client only launches one instance of each external program with a given set of options, even if the same executable and options are listed for more than one method. Pluggable transport bridges discovered for this transport by BridgeFinder would then be set with: SETCONF Bridge="trebuchet 3.2.4.1:8080 keyid=09F911029D74E35BD84156C5635688C009F909F9 rocks=20 height=5.6m". For more information on pluggable transports and supporting Tor configuration commands, see Proposal 180. Future Implementations: POSTMESSAGE and User Confirmation Because configuring even normal bridges alone can expose the user to attacks, it is strongly desired to provide some mechanism to allow the user to approve new bridges prior to their use, especially for situations where BridgeFinderHelper is extracting them transparently while the user performs unrelated activity. If BridgeFinderHelper grows to the point where it is downloading new transform definitions or plugins, user confirmation becomes absolutely required. To achieve user confirmation, we depend upon the POSTMESSAGE command defined in Proposal 197. If the POSTMESSAGE handshake succeeds, instead of sending SETCONF commands directly to the control port, the commands will be wrapped inside a POSTMESSAGE: POSTMESSAGE @all SETCONF Bridge="www.example.com:8284" Upon receiving this POSTMESSAGE, the Primary Controller will validate it, evaluate it, store it to be later enabled by the user, and alert the user that new bridges are available for approval. It is only after the user has approved the new bridges that the Primary Controller should then re-issue the SETCONF commands to configure and deploy them in the tor client. Additionally, see "Security Concerns: Primary Controller" for more discussion on potential pitfalls with POSTMESSAGE. Security Concerns While automatic bridge discovery and configuration is quite compelling and powerful, there are several serious security concerns that warrant extreme care. We've broken them down by component. Security Concerns: Primary Controller In the initial implementation, Orbot and Vidalia must take care to transmit the Tor Control password to BridgeFinder in such a way that it does not end up in system logs, process list, or viewable by other system users. The best known strategy for doing this is by passing the information through exported environment variables. Additionally, in future implementations, Orbot and Vidalia will need to validate Proposal 197 POSTMESSAGE input before prompting the user. POSTMESSAGE is a free-form message-passing mechanism. All sorts of unexpected input may be passed through it by any other authenticated Tor Controllers for their own unrelated communication purposes. Minimal validation includes verifying that the POSTMESSAGE data is a valid Bridge or ClientTransportPlugin line and is acceptable input for SETCONF. All unexpected characters should be removed through using a whitelist, and format and structure should be checked against a regular expression. Additionally, the POSTMESSAGE string should not be passed through any string processing engines that automatically decode character escape encodings, to avoid arbitrary control port execution. At the same time, POSTMESSAGE validation should be light. While fully untrusted input is not expected due to the need for control port authentication and BridgeFinder sanitation, complicated manual string parsing techniques during validation should be avoided. Perform simple easy-to-verify whitelist-based checks, and ignore unrecognized input. Beyond POSTMESSAGE validation, the manner in which the Primary Controller achieves consent from the user is absolutely crucial to security under this scheme. A simple "OK/Cancel" dialog is insufficient to protect the user from the dangers of switching bridges and running new plugins automatically. Newly discovered bridge lines from POSTMESSAGE should be added to a disabled set that the user must navigate to as an independent window apart from any confirmation dialog. The user must then explicitly enable recently added plugins by checking them off individually. We need the user's brain to be fully engaged and aware that it is interacting with Tor during this step. If they get an "OK/Cancel" popup that interrupts their online game play, they will almost certainly simply click "OK" just to get back to the game quickly. The Primary Controller should transmit the POSTMESSAGE content to the control port only after obtaining this out-of-band approval. Security Concerns: BridgeFinder and BridgeFinderHelper The unspecified nature of the IPC channel between BridgeFinder and BridgeFinderHelper makes it difficult to make concrete security suggestions. However, from past experience, the following best practices must be employed to avoid security vulnerabilities: 1. Define a non-webby handshake and/or perform authentication The biggest risk is that unexpected applications will be manipulated into posting malformed data to the BridgeFinder's IPC channel as if it were from BridgeFinderHelper. The best way to defend against this is to require a handshake to properly complete before accepting input. If the handshake fails at any point, the IPC channel must be abandoned and closed. Do not continue scanning for good input after any bad input has been encountered. Additionally, if possible, it is wise to establish a shared secret between BridgeFinder and BridgeFinderHelper through the filesystem or any other means available for use in authentication. For an a good example on how to use such a shared secret properly for authentication, see Trac Ticket #5185 and/or the SafeCookie Tor Control Port authentication mechanism. 2. Perform validation before parsing Care must be taken before converting BridgeFinderHelper data into Bridge lines, especially for cases where the BridgeFinderHelper data is fed directly to the control port after passing through BridgeFinder. The input should be subjected to a character whitelist and possibly also validated against a regular expression to verify format, and if any unexpected or poorly-formed data is encountered, the IPC channel must be closed. 3. Fail closed on unexpected input If the handshake fails, or if any other part of the BridgeFinderHelper input is invalid, the IPC channel must be abandoned and closed. Do *not* continue scanning for good input after any bad input has been encountered.