``` Filename: 135-private-tor-networks.txt Title: Simplify Configuration of Private Tor Networks Author: Karsten Loesing Created: 29-Apr-2008 Status: Closed Target: 0.2.1.x Implemented-In: 0.2.1.2-alpha Change history: 29-Apr-2008 Initial proposal for or-dev 19-May-2008 Included changes based on comments by Nick to or-dev and added a section for test cases. 18-Jun-2008 Changed testing-network-only configuration option names. Overview: Configuring a private Tor network has become a time-consuming and error-prone task with the introduction of the v3 directory protocol. In addition to that, operators of private Tor networks need to set an increasing number of non-trivial configuration options, and it is hard to keep FAQ entries describing this task up-to-date. In this proposal we (1) suggest to (optionally) accelerate timing of the v3 directory voting process and (2) introduce an umbrella config option specifically aimed at creating private Tor networks. Design: 1. Accelerate Timing of v3 Directory Voting Process Tor has reasonable defaults for setting up a large, Internet-scale network with comparably high latencies and possibly wrong server clocks. However, those defaults are bad when it comes to quickly setting up a private Tor network for testing, either on a single node or LAN (things might be different when creating a test network on PlanetLab or something). Some time constraints should be made configurable for private networks. The general idea is to accelerate everything that has to do with propagation of directory information, but nothing else, so that a private network is available as soon as possible. (As a possible safeguard, changing these configuration values could be made dependent on the umbrella configuration option introduced in 2.) 1.1. Initial Voting Schedule When a v3 directory does not know any consensus, it assumes an initial, hard-coded VotingInterval of 30 minutes, VoteDelay of 5 minutes, and DistDelay of 5 minutes. This is important for multiple, simultaneously restarted directory authorities to meet at a common time and create an initial consensus. Unfortunately, this means that it may take up to half an hour (or even more) for a private Tor network to bootstrap. We propose to make these three time constants configurable (note that V3AuthVotingInterval, V3AuthVoteDelay, and V3AuthDistDelay do not have an effect on the _initial_ voting schedule, but only on the schedule that a directory authority votes for). This can be achieved by introducing three new configuration options: TestingV3AuthInitialVotingInterval, TestingV3AuthInitialVoteDelay, and TestingV3AuthInitialDistDelay. As first safeguards, Tor should only accept configuration values for TestingV3AuthInitialVotingInterval that divide evenly into the default value of 30 minutes. The effect is that even if people misconfigured their directory authorities, they would meet at the default values at the latest. The second safeguard is to allow configuration only when the umbrella configuration option TestingTorNetwork is set. 1.2. Immediately Provide Reachability Information (Running flag) The default behavior of a directory authority is to provide the Running flag only after the authority is available for at least 30 minutes. The rationale is that before that time, an authority simply cannot deliver useful information about other running nodes. But for private Tor networks this may be different. This is currently implemented in the code as: /** If we've been around for less than this amount of time, our * reachability information is not accurate. */ #define DIRSERV_TIME_TO_GET_REACHABILITY_INFO (30*60) There should be another configuration option TestingAuthDirTimeToLearnReachability with a default value of 30 minutes that can be changed when running testing Tor networks, e.g. to 0 minutes. The configuration value would simply replace the quoted constant. Again, changing this option could be safeguarded by requiring the umbrella configuration option TestingTorNetwork to be set. 1.3. Reduce Estimated Descriptor Propagation Time Tor currently assumes that it takes up to 10 minutes until router descriptors are propagated from the authorities to directory caches. This is not very useful for private Tor networks, and we want to be able to reduce this time, so that clients can download router descriptors in a timely manner. /** Clients don't download any descriptor this recent, since it will * probably not have propagated to enough caches. */ #define ESTIMATED_PROPAGATION_TIME (10*60) We suggest to introduce a new config option TestingEstimatedDescriptorPropagationTime which defaults to 10 minutes, but that can be set to any lower non-negative value, e.g. 0 minutes. The same safeguards as in 1.2 could be used here, too. 2. Umbrella Option for Setting Up Private Tor Networks Setting up a private Tor network requires a number of specific settings that are not required or useful when running Tor in the public Tor network. Instead of writing down these options in a FAQ entry, there should be a single configuration option, e.g. TestingTorNetwork, that changes all required settings at once. Newer Tor versions would keep the set of configuration options up-to-date. It should still remain possible to manually overwrite the settings that the umbrella configuration option affects. The following configuration options are set by TestingTorNetwork: - ServerDNSAllowBrokenResolvConf 1 Ignore the situation that private relays are not aware of any name servers. - DirAllowPrivateAddresses 1 Allow router descriptors containing private IP addresses. - EnforceDistinctSubnets 0 Permit building circuits with relays in the same subnet. - AssumeReachable 1 Omit self-testing for reachability. - AuthDirMaxServersPerAddr 0 - AuthDirMaxServersPerAuthAddr 0 Permit an unlimited number of nodes on the same IP address. - ClientDNSRejectInternalAddresses 0 Believe in DNS responses resolving to private IP addresses. - ExitPolicyRejectPrivate 0 Allow exiting to private IP addresses. (This one is a matter of taste---it might be dangerous to make this a default in a private network, although people setting up private Tor networks should know what they are doing.) - V3AuthVotingInterval 5 minutes - V3AuthVoteDelay 20 seconds - V3AuthDistDelay 20 seconds Accelerate voting schedule after first consensus has been reached. - TestingV3AuthInitialVotingInterval 5 minutes - TestingV3AuthInitialVoteDelay 20 seconds - TestingV3AuthInitialDistDelay 20 seconds Accelerate initial voting schedule until first consensus is reached. - TestingAuthDirTimeToLearnReachability 0 minutes Consider routers as Running from the start of running an authority. - TestingEstimatedDescriptorPropagationTime 0 minutes Clients try downloading router descriptors from directory caches, even when they are not 10 minutes old. In addition to changing the defaults for these configuration options, TestingTorNetwork can only be set when a user has manually configured DirServer lines. Test: The implementation of this proposal must pass the following tests: 1. Set TestingTorNetwork and see if dependent configuration options are correctly changed. tor DataDirectory . ControlPort 9051 TestingTorNetwork 1 DirServer \ "mydir 127.0.0.1:1234 0000000000000000000000000000000000000000" telnet 127.0.0.1 9051 AUTHENTICATE GETCONF TestingTorNetwork TestingAuthDirTimeToLearnReachability 250-TestingTorNetwork=1 250 TestingAuthDirTimeToLearnReachability=0 QUIT 2. Set TestingTorNetwork and a dependent configuration value to see if the provided value is used for the dependent option. tor DataDirectory . ControlPort 9051 TestingTorNetwork 1 DirServer \ "mydir 127.0.0.1:1234 0000000000000000000000000000000000000000" \ TestingAuthDirTimeToLearnReachability 5 telnet 127.0.0.1 9051 AUTHENTICATE GETCONF TestingTorNetwork TestingAuthDirTimeToLearnReachability 250-TestingTorNetwork=1 250 TestingAuthDirTimeToLearnReachability=5 QUIT 3. Start with TestingTorNetwork set and change a dependent configuration option later on. tor DataDirectory . ControlPort 9051 TestingTorNetwork 1 DirServer \ "mydir 127.0.0.1:1234 0000000000000000000000000000000000000000" telnet 127.0.0.1 9051 AUTHENTICATE SETCONF TestingAuthDirTimeToLearnReachability=5 GETCONF TestingAuthDirTimeToLearnReachability 250 TestingAuthDirTimeToLearnReachability=5 QUIT 4. Start with TestingTorNetwork set and a dependent configuration value, and reset that dependent configuration value. The result should be the testing-network specific default value. tor DataDirectory . ControlPort 9051 TestingTorNetwork 1 DirServer \ "mydir 127.0.0.1:1234 0000000000000000000000000000000000000000" \ TestingAuthDirTimeToLearnReachability 5 telnet 127.0.0.1 9051 AUTHENTICATE GETCONF TestingAuthDirTimeToLearnReachability 250 TestingAuthDirTimeToLearnReachability=5 RESETCONF TestingAuthDirTimeToLearnReachability GETCONF TestingAuthDirTimeToLearnReachability 250 TestingAuthDirTimeToLearnReachability=0 QUIT 5. Leave TestingTorNetwork unset and check if dependent configuration options are left unchanged. tor DataDirectory . ControlPort 9051 DirServer \ "mydir 127.0.0.1:1234 0000000000000000000000000000000000000000" telnet 127.0.0.1 9051 AUTHENTICATE GETCONF TestingTorNetwork TestingAuthDirTimeToLearnReachability 250-TestingTorNetwork=0 250 TestingAuthDirTimeToLearnReachability=1800 QUIT 6. Leave TestingTorNetwork unset, but set dependent configuration option which should fail. tor DataDirectory . ControlPort 9051 DirServer \ "mydir 127.0.0.1:1234 0000000000000000000000000000000000000000" \ TestingAuthDirTimeToLearnReachability 0 [warn] Failed to parse/validate config: TestingAuthDirTimeToLearnReachability may only be changed in testing Tor networks! 7. Start with TestingTorNetwork unset and change dependent configuration option later on which should fail. tor DataDirectory . ControlPort 9051 DirServer \ "mydir 127.0.0.1:1234 0000000000000000000000000000000000000000" telnet 127.0.0.1 9051 AUTHENTICATE SETCONF TestingAuthDirTimeToLearnReachability=0 513 Unacceptable option value: TestingAuthDirTimeToLearnReachability may only be changed in testing Tor networks! 8. Start with TestingTorNetwork unset and set it later on which should fail. tor DataDirectory . ControlPort 9051 DirServer \ "mydir 127.0.0.1:1234 0000000000000000000000000000000000000000" telnet 127.0.0.1 9051 AUTHENTICATE SETCONF TestingTorNetwork=1 553 Transition not allowed: While Tor is running, changing TestingTorNetwork is not allowed. 9. Start with TestingTorNetwork set and unset it later on which should fail. tor DataDirectory . ControlPort 9051 TestingTorNetwork 1 DirServer \ "mydir 127.0.0.1:1234 0000000000000000000000000000000000000000" telnet 127.0.0.1 9051 AUTHENTICATE RESETCONF TestingTorNetwork 513 Unacceptable option value: TestingV3AuthInitialVotingInterval may only be changed in testing Tor networks! 10. Set TestingTorNetwork, but do not provide an alternate DirServer which should fail. tor DataDirectory . ControlPort 9051 TestingTorNetwork 1 [warn] Failed to parse/validate config: TestingTorNetwork may only be configured in combination with a non-default set of DirServers. ```