From ef7838eab241e84158a1d4bd5b901ca9510fda83 Mon Sep 17 00:00:00 2001 From: teor Date: Tue, 28 Jan 2020 15:00:51 +1000 Subject: Prop 312: Relay Auto IPv6 Addreess - Initial Draft Related tickets: 33073 (proposal), 5940 (implementation). --- proposals/312-relay-auto-ipv6-addr.txt | 900 +++++++++++++++++++++++++++++++++ 1 file changed, 900 insertions(+) create mode 100644 proposals/312-relay-auto-ipv6-addr.txt (limited to 'proposals/312-relay-auto-ipv6-addr.txt') diff --git a/proposals/312-relay-auto-ipv6-addr.txt b/proposals/312-relay-auto-ipv6-addr.txt new file mode 100644 index 0000000..20d1094 --- /dev/null +++ b/proposals/312-relay-auto-ipv6-addr.txt @@ -0,0 +1,900 @@ +Filename: 312-relay-auto-ipv6-addr.txt +Title: Tor Relays Automatically Find Their IPv6 Address +Author: teor +Created: 28-January-2020 +Status: Draft +Ticket: #33073 + +0. Abstract + + We propose that Tor relays (and bridges) should automatically find their + IPv6 address, and use it to publish an IPv6 ORPort. For some relays to find + their IPv6 address, they may need to fetch some directory documents from + directory authorities over IPv6. (For anonymity reasons, bridges are unable + to fetch directory documents over IPv6, until clients start to do so.) + +1. Introduction + + Tor relays (and bridges) currently find their IPv4 address, and use it as + their ORPort and DirPort address when publishing their descriptor. But + relays and bridges do not automatically find their IPv6 address. + + However, relay operators can manually configure an ORPort with an IPv6 + address, and that ORPort is published in their descriptor in an "or-address" + line (see [Tor Directory Protocol]). + + Many relay operators don't know their relay's IPv4 or IPv6 addresses. So + they rely on Tor's IPv4 auto-detection, and don't configure an IPv6 + address. When operators do configure an IPv6 address, it's easy for them to + make mistakes. IPv6 ORPort issues are a significant source of relay + operator support requests. + + Implementing IPv6 address auto-detection, and IPv6 ORPort reachability + checks (see [Proposal 311: Relay IPv6 Reachability]) will increase the + number of working IPv6-capable relays in the tor network. + +2. Scope + + This proposal modifies Tor's behaviour as follows: + + Relays, bridges, and directory authorities: + * automatically find their IPv6 address, and + * for consistency between IPv4 and IPv6 detection: + * start using IPv4 ORPort and DirPort for IPv4 address detection, and + * re-order IPv4 address detection methods. + + Relays and directory authorities (but not bridges): + * fetch some directory documents over IPv6. + For anonymity reasons, bridges are unable to fetch directory documents over + IPv6, until clients start to do so. (See + [Proposal 306: Client Auto IPv6 Connections].) + + This proposal makes a small, optional change to existing client behaviour: + * clients also check IPv6 addresses when rotating TLS keys for new + networks. + In addition to the changes to IPv4 address resolution, most of which won't + affect clients. (Because they do not set Address, ORPort, or DirPort.) + + Throughout this proposal, "relays" includes directory authorities, except + where they are specifically excluded. "relays" does not include bridges, + except where they are specifically included. (The first mention of "relays" + in each section should specifically exclude or include these other roles.) + + When this proposal describes Tor's current behaviour, it covers all + supported Tor versions (0.3.5.7 to 0.4.2.5), as of January 2020, except + where another version is specifically mentioned. + +3. Finding Relay IPv6 Addresses + + We propose that tor relays (and bridges) automatically find their IPv6 + address, and use it to publish an IPv6 ORPort. + + For some relays to find their IPv6 address, they may need to fetch some + directory documents from directory authorities over IPv6. (For anonymity + reasons, bridges are unable to fetch directory documents over IPv6, until + clients start to do so.) + +3.1. Current Relay IPv4 Address Implementation + + Currently, all relays (and bridges) must have an IPv4 address. IPv6 + addresses are optional for relays. + + Tor currently tries to find relay IPv4 addresses in this order: + 1. the Address torrc option + 2. the address of the hostname (resolved using DNS, if needed) + 3. a local interface address + (by making a self-connected socket, if needed) + 4. an address reported by a directory server (using X-Your-Address-Is) + + When using the Address option, or the hostname, tor supports: + * an IPv4 address literal, or + * resolving an IPv4 address from a hostname. + + If tor is running on the public network, and an address isn't globally + routable, tor ignores it. (If it was explicitly set in Address, tor logs an + error.) + + If there are multiple valid addresses, tor chooses: + * the first address returned by the resolver, + * the first address returned by the local interface API, or + * the latest address returned by a directory server. + +3.2. Finding Relay IPv6 Addresses + + We propose that relays (and bridges) try to find their IPv6 address. For + consistency, we also propose to change the address resolution order for + IPv4 addresses. + + We use the following general principles to choose the order of IP address + methods: + * Explicit is better than Implicit, + * Local Information is better than a Remote Dependency, + * Trusted is better than Untrusted, and + * Reliable is better than Unreliable. + Within these constraints, we try to find the simplest working design. + + Therefore, we propose that tor tries to find relay IPv4 and IPv6 addresses + in this order: + 1. the Address torrc option + 2. the advertised ORPort address + 3. the advertised DirPort address (IPv4 only; relays, not bridges) + 4. a local interface address + (by making a self-connected socket, if needed) + 5. the address of the host's own hostname (resolved using DNS, if needed) + 6. an address reported by a directory server (using X-Your-Address-Is) + + (Each of these address resolution steps is described in more detail, in its + own subsection.) + + While making these changes, we want to preserve tor's existing behaviour: + * resolve Address using the local resolver, if needed, + * ignore private addresses on public tor networks, and + * when there are multiple valid addresses, choose the first or latest + address, as appropriate. + +3.2.1. Make the Address torrc Option Support IPv6 + + First, we propose that relays (and bridges) use the Address torrc option + to find their IPv4 and IPv6 addresses. + + There are two cases we need to cover: + + 1. Explicit IP addresses: + * allow the option to be specified up to two times, + * use the IPv4 address for IPv4, + * use the IPv6 address for IPv6. + Configuring two addresses in the same address family is a config error. + + 2. Hostnames / DNS names: + * allow the option to be specified up to two times, + * look up the configured name, + * use the first IPv4 and IPv6 address returned by the resolver, and + Resolving multiple addresses in the same address family is not a + runtime error, but only the first address from each family will be + used. + + These lookups should ignore private addresses on public tor networks. If + multiple IPv4 or IPv6 addresses are returned, the first public address from + each family should be used. + + We should also support the following combinations: + A. IPv4 Address / hostname (for IPv6 only), + B. IPv6 Address / hostname (for IPv4 only), + C. IPv4 Address only / try to guess IPv6, then check its reachability + (see section 4.3.1 in [Proposal 311: Relay IPv6 Reachability]), and + D. IPv6 Address only / guess IPv4, then its reachability must succeed. + There are also similar configurations where a hostname is configured, but it + only provides IPv4 or IPv6 addresses. + + Combination C is the most common legacy configuration. We want to + support the following outcomes for legacy configurations: + * automatic upgrades to guessed and reachable IPv6 addresses, + * continuing to operate on IPv4 when the IPv6 address can't be guessed, + and + * continuing to operate on IPv4 when the IPv6 address has been guessed, + but it is unreachable. + + At this time, we do not propose guessing multiple IPv4 or IPv6 addresses + and testing their reachability (see section 3.4.2). + + It is an error to configure an Address option with a private IPv4 or IPv6 + address, or with a hostname that does not resolve to any publicly routable + IPv4 or IPv6 addresses. + + If the Address option is not configured for IPv4 or IPv6, or the hostname + lookups do not provide both IPv4 and IPv6 addresses, address resolution + should go to the next step. + +3.2.2. Use the Advertised ORPort IPv4 and IPv6 Addresses + + Next, we propose that relays (and bridges) use the first advertised ORPort + IPv4 and IPv6 addresses, as configured in their torrc. + + The ORPort address may be a hostname. If it is, tor should try to use it to + resolve an IPv4 and IPv6 address, and open ORPorts on the first available + IPv4 and IPv6 address. Tor should respect the IPv4Only and IPv6Only port + flags, if specified. (Tor currently resolves IPv4 addresses in ORPort + lines. It might not look for an IPv6 address.) + + Relays (and bridges) currently use the first advertised ORPort IPv6 address + as their IPv6 address. We propose to use the first advertised IPv4 ORPort + address in a similar way, for consistency. + + Therefore, this change may affect existing relay IPv4 addressses. We expect + that a small number of relays may change IPv4 address, from a guessed IPv4 + address, to their first advertised IPv4 ORPort address. + + In rare cases, relays may have been using non-advertised ORPorts for their + addresses. This change may also change their addresses. + + We propose ignoring private configured ORPort addresses on public tor + networks. (Binding to private ORPort addresses is supported, even on public + tor networks, for relays that use NAT to reach the Internet.) If an ORPort + address is private, address resolution should go to the next step. + +3.2.3. Use the Advertised DirPort IPv4 Address + + Next, we propose that relays use the first advertised DirPort IPv4 address, + as configured in their torrc. + + The following DirPort configurations can not be used for address + resolution, because they are not supported: + * bridge DirPorts, and + * advertised IPv6 DirPorts. + + The DirPort address may be a hostname. If it is, tor should try to use it to + resolve an IPv4 address, and open a DirPort on the first available IPv4 + address. Tor should only look for IPv6 addresses if the IPv6Only port flag + is specified. (Since advertised IPv6 DirPorts are not supported, a + working configuration may also require the NoAdvertise flag.) + + Relays currently use the first advertised ORPort IPv6 address as their IPv6 + address. We propose to use the first advertised IPv4 DirPort address in a + similar way, for consistency. + + Therefore, this change may affect existing relay IPv4 addressses. We expect + that a very small number of relays may change IPv4 address, from a guessed + IPv4 address, to their first advertised IPv4 DirPort address. (But we expect + that most relays that change will be using their ORPort address.) + + We propose ignoring private configured DirPort addresses on public relays. + (Binding to private DirPort addresses is supported, for networks that use + NAT.) If a DirPort address is private, address resolution should go to the + next step. + +3.2.4. Use Local Interface IPv6 Address + + Next, we propose that relays (and bridges) use publicly routable addresses + from the OS interface addresses or routing table, as their IPv4 and IPv6 + addresses. + + Tor has local interface address resolution functions, which support most + major OSes. Tor uses these functions to guess its IPv4 address. We propose + using them to also guess tor's IPv6 address. + + We also propose modifying the address resolution order, so interface + addresses are used before the local hostname. This decision is based + on our principles: interface addresses are local, trusted, and reliable; + hostname lookups may be remote, untrusted, and unreliable. + + Some developer documentation also recommends using interface addresses, + rather than resolving the host's own hostname. For example, on recent + versions of macOS, the man pages tell developers to use interface addresses + (getifaddrs) rather than look up the host's own hostname (gethostname and + getaddrinfo). Unfortunately, these man pages don't seem to be available + online, except for short quotes (see [getaddrinfo man page] for the + relevant quote). + + If the local interface addresses are unavailable, tor opens a self-connected + UDP socket to a publicly routable address, but doesn't actually send any + packets. Instead, it uses the socket APIs to discover the interface address + for the socket. + + Tor already ignores private IPv4 interface addresses on public relays. + (Binding to private DirPort addresses is supported, for networks that use + NAT.) We propose to also ignore private IPv6 interface addresses. If all + IPv4 or IPv6 interface addresses are private, address resolution should go + to the next step. + +3.2.5. Use Own Hostname IPv6 Addresses + + Next, we propose that relays (and bridges) get their local hostname, look + up its addresses, and use them as its IPv4 and IPv6 addresses. + + We propose to use the same underlying lookup functions to look up the IPv4 + and IPv6 addresses for: + * the Address torrc option (see section 3.2.1), and + * the local hostname. + However, OS APIs typically only return a single hostname. + + Even though the hostname lookup may use remote DNS, we propose to use it on + directory authorities, to maintain compatibility with current + configurations. Even if it is remote, we expect the configured DNS to be + somewhat trusted by the operator. + + The hostname lookup should ignore private addresses on public relays. If + multiple IPv4 or IPv6 addresses are returned, the first public address from + each family should be used. If all IPv4 or IPv6 hostname addresses are + private, address resolution should go to the next step. + +3.2.6. Use Directory Header IPv6 Addresses + + Finally, we propose that relays get their IPv4 and IPv6 addresses from the + X-Your-Address-Is HTTP header in tor directory documents. To support this + change, we propose that relays start fetching directory documents over IPv4 + and IPv6. + + We propose that bridges continue to only fetch directory documents over + IPv4, because they try to imitate clients. (Most clients only fetch + directory documents over IPv4, a few clients are configured to only fetch + over IPv6.) When client behaviour changes to use both IPv4 and IPv6 for + directory fetches, bridge behaviour can also change to match. (See + section 3.4.1 and [Proposal 306: Client Auto IPv6 Connections].) + + We propose that directory authorities should ignore addresses in directory + headers. Allowing other authorities (or relays?) to change a directory + authority's published IP address may lead to security issues. Instead, + if interface and hostname lookups fail, tor should stop address resolution, + and return a permanent error. (And issue a log to the operator, see below.) + + We propose to use a simple load balancing scheme for IPv4 and IPv6 + directory requests: + * choose between IPv4 and IPv6 directory requests at random. + + We do not expect this change to have any load-balancing impact on the public + tor network, because the number of relays is much smaller than the number + of clients. However, the 6 directory authorities with IPv6 enabled may see + slightly more directory load, particularly over IPv6. + + To support this change, tor should also change how it handles IPv6 + directory failures on relays: + * avoid recording IPv6 directory failures as remote relay failures, + because they may actually be due to a lack of IPv6 connectivity on the + local relay, and + * issue IPv6 directory failure logs at notice level, and rate-limit them + to one per hour. + + If a relay is: + * explicitly configured with an IPv6 address, or + * a publicly routable, reachable IPv6 address is discovered in an + earlier step, + tor should start issuing IPv6 directory failure logs at warning level. + + (Alternately, tor could stop doing IPv6 directory requests entirely. But we + prefer designs where all relays behave in a similar way, regardless of their + internal state.) + + For some more complex directory load-balancing schemes, see section 3.5.3. + + Tor already ignores private IPv4 addresses in directory headers. We propose + to also ignore private IPv6 addresses in directory headers. If all IPv4 and + IPv6 addresses in directory headers are private, address resolution should + pause, and return a temporary error. + + Whenever address resolution fails, tor should warn the operator to set the + Address torrc option for IPv4 and IPv6. (If IPv4 is available, and only + IPv6 is missing, the log should be at notice level.) + + Address resolution should continue the next time tor receives a directory + header containing a public IPv4 or IPv6 address. + +3.2.7. Disabling IPv6 Address Resolution + + Relays (and bridges) that have a reachable IPv6 address, but that address + is unsuitable for the relay, need to be able to disable IPv6 address + resolution. + + Based on [Proposal 311: Relay IPv6 Reachability], and this proposal, those + relays would: + * discover their IPv6 address, + * open an IPv6 ORPort, + * find it reachable, + * publish a descriptor containing that IPv6 ORPort, + * have the directory authorities find it reachable, + * have it published in the consensus, and + * have it used by clients. + + Currently, relays are required to have an IPv4 address. So if the guessed + IPv4 address is unsuitable, operators can set the Address option to a + suitable IPv4 address. But IPv6 addresses are optional, so relay operators + may need to disable IPv6 entirely. + + We propose a new torrc-only option, AddressDisableIPv6. This option is set + to 0 by default. If the option is set to 1, tor disables IPv6 address + resolution, IPv6 ORPorts, IPv6 reachability checks, and publishing an IPv6 + ORPort in its descriptor. + +3.2.8. Automatically Enabling an IPv6 ORPort + + We propose that relays (and bridges) that discover their IPv6 address, + should open an ORPort on that address, and test its reachability (see + [Proposal 311: Relay IPv6 Reachability], particularly section 4.3.1). + + The ORPort should be opened on the port configured in the relay's ORPort + torrc option. Relay operators can use the IPv4Only and IPv6Only options + to configure different ports for IPv4 and IPv6. + + If both reachability checks succeed, relays should publish their IPv4 and + IPv6 ORPorts in their descriptor. + + If only the IPv4 ORPort check succeeds, and the IPv6 address was guessed + (rather than being explicitly configured), then relays should publish their + IPv4 ORPort in their descriptor. (And log a notice about the failed IPv6 + ORPort reachability check.) + +3.3. Consequential Tor Client Changes + + We do not propose any required client address resolution changes at this + time. + + However, clients will use the updated address resolution functions to detect + when they are on a new connection, and therefore need to rotate their TLS + keys. + + This minor client change allows us to avoid keeping an outdated version of + the address resolution functions, which is only for client use. + + Clients should skip address resolution steps that don't apply to them, such + as: + * the ORPort option, + * the DirPort option, and + * the Address option, if it becomes a relay module option. + +3.4. Alternative Address Resolution Designs + + We briefly mention some potential address resolution designs, and the + reasons that they were not used in this proposal. + + (Some designs may be proposed for future Tor versions, but are not necessary + at this time.) + +3.4.1. Future Bridge IPv6 Address Resolution Behaviour + + When clients automatically fetch directory documents via relay IPv4 and + IPv6 ORPorts by default, bridges should also adopt this dual-stack + behaviour. (For example, see [Proposal 306: Client Auto IPv6 Connections].) + + When bridges fetch directory documents via IPv6, they will be able to find + their IPv6 address using directory headers (see 3.2.6). + +3.4.2. Guessing Muliple IPv4 or IPv6 Addresses + + We avoid designs which guess (or configure) multiple IPv4 or IPv6 + addresses, test them all for reachability, and choose one that works. + + Using multiple addresses is rare, and the code to handle it is complex. It + also requires careful design to avoid: + * conflicts between multiple relays (or bridges) on the same address + (tor allows up to 2 relays per IPv4 address), + * relay flapping, + * race conditions, and + * relay address switching. + +3.4.3. Rejected Address Resolution Designs + + We reject designs that try all the different address resolution methods, + score addresses, and then choose the address with the highest score. + + These designs are a generalisation of designs that try different methods in + a set order (like this proposal). They are more complex than required. + Complex designs can confuse operators, particularly when they fail. + + Operators should not need complex address resolution in tor: most relay + (and bridge) addresses are fixed, or change occasionally. And most relays + can reliably discover their address using directory headers, if all other + methods fail. (Bridges won't discover their IPv6 address from directory + headers, see section 3.2.6.) + + If complex address resolution is required, it can be configured using a + dynamic DNS name in the Address torrc option, or via the control port. + + We also avoid designs that use any addresses other than the first + (or latest) valid IPv4 and IPv6 address. These designs are more complex, and + they don't have clear benefits: + * sort addresses numerically (avoid address flipping) + * sort addresses by length, then numerically + (also minimise consensus size) + * store a list of previous addresses in the state file, and use the most + recently used address that's currently available. + Operators who want to avoid address flipping should set the Address option + in the torrc. Operators who want to minimise the size of the consensus + should use all-zero IPv6 host identifiers. + +3.5. Optional Efficiency and Reliability Changes + + We propose some optional changes for efficiency and reliability, and + describe their impact. + + Some of these changes may be more appropriate in future releases, or + along with other proposed features. + +3.5.1. Only Use Authenticated Directory Header IPv4 and IPv6 Addresses + + We propose this optional change, to improve relay (and bridge) address + accuracy and reliability. + + Relays should only use authenticated directory fetches to discover their + own IPv4 and IPv6 addresses. + + Tor supports authenticated, encrypted directory fetches using BEGINDIR over + ORPorts (see the [Tor Specification] for details). + + Relays currently fetch unencrypted directory documents over DirPorts. The + directory document itself is signed, but the HTTP headers are not + authenticated. (Clients and bridges only fetch directory documents using + authenticated directory fetches.) + + Using authenticated directory headers for relay addresses: + * avoids caches (or other machines) mangling X-Your-Address-Is headers in + transit, and + * avoids attacks where directories are deliberately given an incorrect IP + address. + + To make this change, we need to modify two different parts of tor: + * when making directory requests, relays should fetch some directory + documents using BEGINDIR over ORPorts, and + * when using the X-Your-Address-Is HTTP header to guess their own IPv4 or + IPv6 addresses, relays ignore directory documents that were not fetched + using BEGINDIR over ORPorts. + + See also sections 3.5.2 (for preferring addresses from directory + authorities) and 3.5.3 (for load-balancing). + +3.5.2. Preferring IPv4 and IPv6 Addresses from Directory Authorities + + We propose this optional change, to improve relay (and bridge) address + accuracy and reliability. + + Relays store the latest IPv4 and IPv6 addresses received from: + * a directory authority, and + * a directory mirror, + and prefer the address from a directory authority, as long as it is not + too old. + + Relays should also store a timestamp for each address, and ignore addresses + where: + * the timestamp is too old, or + * the timestamp for the preferred address (from a directory authority) + is much older than the timestamp for the other address (from a directory + mirror). + + Relays should try directory authorities often enough, that their addresses + usually do not become too old. (And if the addresses do become too old, + relays should try directory authorities more often.) + + As an alternative, relays could ignore addresses from other relays: + * when using the X-Your-Address-Is HTTP header to guess their own IPv4 or + IPv6 addresses, relays ignore directory documents that were not fetched + from directory authorities. + However, this implementation is not ideal, because it is better for a relay + to use an address from a directory mirror, than have no address at all. + + See also sections 3.5.1 (for only using addresses from authenticated + connections) and 3.5.3 (for load-balancing). + +3.5.3. Load Balancing + + We propose some optional changes to improve load-balancing. + +3.5.3.1. Directory Authority Load Balancing + + Ideally, we would like all relays (and bridges) to do frequent directory + fetches: + * using BEGINDIR over ORPorts, + * to directory authorities. + However, this change may be unsustainable during high network load + (see [Ticket 33018: Dir auths using an unsustainable 400+ mbit/s]). + + Therefore, we propose a simple load-balancing scheme between address + resolution and non-address resolution requests: + * when relays do not know their own IP addresses, they should make as many + directory authority ORPort directory fetches as is sustainable, and + * when relays know their own IP addresses, they should make an occasional + directory authority ORPort directory fetch, to learn if their address + has changed. + + We use the load-balancing criteria in section 3.5.3.3, to select the ratio + between: + * ORPort connections to directory authorities, and + * ORPort or DirPort connections to directory mirrors. + + It should be possible for relays to choose between ORPort and DirPort + connections to directory mirrors at random: they typically have enough spare + CPU and bandwidth. + + See also sections 3.5.1 (for only using addresses from authenticated + connections) and 3.5.2 (for preferring addresses from directory + authorities). + +3.5.3.2. Load Balancing Between IPv4 and IPv6 Directories + + We propose this optional change, to improve the load-balancing between IPv4 + and IPv6 directories, when used by relays to find their IPv4 and IPv6 + addresses (see section 3.2.6). + + This change may only be necessary if the following changes result in poor + load-balancing, or other relay issues: + * randomly selecting IPv4 or IPv6 directories (see section 3.2.6), or + * preferring directory header addresses, from directory authorities, + via an authenticated connection (see sections 3.5.1 and 3.5.2). + + We propose a new torrc option and consensus parameter: + MaxNumIPv4DirectoryAttempts. This option limits the number of IPv4 directory + requests, before the relay makes an IPv6 directory request. It should only + apply to attempts that are expected to provide a usable IPv4 or IPv6 + address in their directory header. (Based on sections 3.2.6, 3.5.1, and + 3.5.2.) + + The design is similar to MaxNumIPv4BootstrapAttempts in + [Proposal 306: Client Auto IPv6 Connections]. + + Here is a quick sketch of the design: + * when MaxNumIPv4DirectoryAttempts is reached, select an IPv6-capable + directory, and make an IPv6 connection attempt, + * use a directory authority, or an ORPort, if required (see sections + 3.5.1 and 3.5.2), + * use a default value between 2 and 4: + * the ideal value for load-balancing is >= 2 + (because 6/9 directory authorities are already on IPv6) + * the ideal value for minimising failures is ~4 + (because relays won't waste too much CPU or bandwidth) + * choose the default value based on the load-balancing criteria in section + 3.5.3.3. + + Alternately, we could wait until + [Proposal 306: Client Auto IPv6 Connections] is implemented, and use the + directory fetch design from that proposal. + +3.5.3.3. General Load Balancing Criteria + + We propose the following criteria for choosing load-balancing ratios: + + The selected ratios should be chosen based on the following factors: + * the current number of directory fetches that a relay makes: + * when bootstrapping with an empty cache directory, and + * in a steady state (per hour, or per new consensus), + (these numbers aren't currently collected by tor, so we may need to + write some extra code to include them in the heartbeat logs), + * relays need to discover their IPv4 and IPv6 addresses to publish their + descriptors, + * it only takes one successful directory fetch from one authority for a + relay to discover its IP address (see section 3.5.2), + * relays will fall back to addresses from directory mirrors, if directory + authorities are unavailable (see section 3.5.2), + * BEGINDIR over ORPort requires and TLS connection, and some additional + tor cryptography, so it is more expensive for authorities than a + DirPort fetch (and it can not be cached by a HTTP cache) + (see section 3.5.1), + * minimising wasted CPU (and bandwidth) for IPv6 connection attempts on + IPv4-only relays, and + * other potential changes to relay directory fetches (see + [Ticket 33018: Dir auths using an unsustainable 400+ mbit/s]) + + The selected ratios should allow almost all relays to update both their IPv4 + and IPv6 addresses: + * at least twice when they bootstrap (to allow for fetch failures), + * at least once per directory fetch (or per hour), and + * from a directory authority (if available). + + In this proposal, relays choose between IPv4 and IPv6 directory fetches + at random (see section 3.2.6 for more detail). + +3.5.4. Detailed Address Resolution Logs + + We propose this optional change, to help diagnose relay address resolution + issues. + + Relays (and bridges) should log the address chosen using each address + resolution method, when: + * address resolution succeeds, + * address resolution fails, + * reachability checks fail, or + * publishing the descriptor fails. + These logs should be rate-limited separately for successes and failures. + + The logs should tell operators to set the Address torrc option for IPv4 and + IPv6 (if available). + +3.5.5. Add IPv6 Support to is_local_addr() + + We propose this optional change, to improve the accuracy of IPv6 address + detection from directory documents. + + Directory servers use is_local_addr() to detect if the requesting tor + instance is on the same local network. If it is, the directory server does + not include the X-Your-Address-Is HTTP header in directory documents. + + Currently, is_local_addr() checks for: + * an internal IPv4 or IPv6 address, or + * the same IPv4 /24 as the directory server. + + We propose also checking for: + * the same IPv6 /48 as the directory server. + + We choose /48 because it is typically the smallest network in the global + IPv6 routing tables, and it was previously the recommended per-customer + network block. (See [RFC 6177: IPv6 End Site Address Assignment].) + + Tor currently uses: + * IPv4 /8 and IPv6 /16 for port summaries, + * IPv4 /16 and IPv6 /32 for path selection (avoiding relays in the same + network block). + +3.5.6. Add IPv6 Support to AuthDirMaxServersPerAddr + + We propose this optional change, to improve the health of the network, by + rejecting too many relays on the same IPv6 address. + + Modify get_possible_sybil_list() so it takes an address family argument, + and returns a list of IPv4 or IPv6 sybils. + + Use the modified get_possible_sybil_list() to exclude relays from the + authority's vote, if there are more than AuthDirMaxServersPerAddr on the + same IPv4 or IPv6 address. + + Since these relay exclusions happen at voting time, they do not require a + new consensus method. + +3.5.7. Use a Local Interface Address on the Default Route + + We propose this optional change, to improve the accuracy of local interface + IPv4 and IPv6 address detection (see section 3.2.4). + + Rewrite the get_interface_address*() functions to choose an interface + address on the default route, or to sort default route addresses first in + the list of addresses. (If the platform API allows us to find the default + route.) + + For more information, see [Ticket 12377: Prefer default route when checking + local interface addresses]. + + This change might not be necessary, because the directory header IP address + method will find the IP address of the default route, in most cases + (see section 3.2.6). + +3.5.8. Add IPv6 Support Using gethostbyname2() + + We propose these optional changes, to add IPv6 support to hostname + resolution on older OSes. These changes affect: + * the Address torrc option, when it is a hostname (see section 3.2.1), + and + * automatic hostname resolution (see section 3.2.5). + + Use gethostbyname2() to add IPv6 support to hostname resolution on older + OSes, which don't support getaddrinfo(). + + But this change may be unnecessary, because: + * Linux has used getaddrinfo() by default since glibc 2.20 (2014) + * macOS has recommended getaddrinfo() since before 2006 + * since macOS adopts BSD changes, most BSDs would have switched to + getaddrinfo() in a similar timeframe + * Windows has supported getaddrinfo() since Windows Vista; tor's minimum + supported Windows version is Vista. + See [Tor Supported Platforms] for more details. + + When looking up hostnames using gethostbyname() or gethostbyname2(), if the + first address is a private address, we may want to look at the entire list + of addresses. Some struct hostent versions (example: current macOS) also + have a h_addr_list rather than h_addr. (They define h_addr as + h_addr_list[0], for backwards compatibility.) + + However, having private and public addresses resolving from the same + hostname is a rare configuration, so we might not need to make this change. + (On OSes that support getaddrinfo(), tor searches the list of addresses for + a publicly routable address.) + + As an alternative, if we believe that all supported OSes have getaddrinfo(), + we could simply remove the gethostbyname() code, rather than trying to + modify it to work with IPv6. + + Most relays can reliably discover their address using directory headers, + if all other methods fail. Or operators can set the Address torrc option to + an IPv4 or IPv6 literal. + +3.5.9. Change Relay OutboundBindAddress Defaults + + We propose this optional change, to improve the reliability of + IP address-based filters in tor. + + For example, the tor network treats relay IP addresses differently when: + * resisting denial of service, and + * selecting canonical, long-term connections. + (See [Ticket 33018: Dir auths using an unsustainable 400+ mbit/s] for the + initial motivation for this change: resisting significant bandwidth load + on directory authorities.) + + Now that tor knows its own addresses, we propose that relays (and bridges) + set their IPv4 and IPv6 OutboundBindAddress to these discovered addresses, + by default. If binding fails, tor should fall back to an unbound socket. + + Operators would still be able to set a custom IPv4 and IPv6 + OutboundBindAddress, if needed. + + Currently, tor doesn't bind to a specific address, unless + OutboundBindAddress is configured. So on relays with multiple IP addresses, + the outbound address comes from the chosen route (usually the default + route). + +4. Directory Protocol Specification Changes + + We propose explicitly supporting IPv6 X-Your-Address-Is HTTP headers in the + tor directory protocol. + + We propose the following changes to the [Tor Directory Protocol] + specification, in section 6.1: + + Servers MAY include an X-Your-Address-Is: header, whose value is the + apparent IPv4 or IPv6 address of the client connecting to them. IPv6 + addresses SHOULD/MAY (TODO) be formatted enclosed in square brackets. + + TODO: require brackets? What does Tor currently do? + + For directory connections tunneled over a BEGIN_DIR stream, servers SHOULD + report the IP from which the circuit carrying the BEGIN_DIR stream reached + them. + + Servers SHOULD disable caching of multiple network statuses or multiple + server descriptors. Servers MAY enable caching of single descriptors, + single network statuses, the list of all server descriptors, a v1 + directory, or a v1 running routers document, with appropriate expiry times + (around 30 minutes). Servers SHOULD disable caching of X-Your-Address-Is + headers. + +5. Test Plan + + We provide a quick summary of our testing plans. + +5.1. Test Find Relay IPv6 Addresses + + We propose to test these changes using chutney networks. However, chutney + creates a limited number of configurations, so we also need to test these + changes with relay operators on the public network. + + Therefore, we propose to test these changes on the public network with a + small number of relays and bridges. + + Once these changes are merged, volunteer relay and bridge operators will be + able to test them by: + * compiling from source, + * running nightly builds, or + * running alpha releases. + +5.2. Test Existing Features + + We will modify and test these existing features: + * Find Relay IPv4 Addresses + + We do not plan on modifying these existing features: + * relay address retries + * existing warning logs + But we will test that they continue to function correctly, and fix any bugs + triggered by the modifications in this proposal. + +6. Ongoing Monitoring + + To monitor the impact of these changes, relays should collect basic IPv4 + and IPv6 connection and bandwidth statistics (see [Proposal 313: Relay IPv6 + Statistics]). + + We may also collect separate statistics on connections from: + * clients (and bridges, because they act like clients), and + * other relays (and authorities, because they act like relays). + + Some of these statistics may be included in tor's heartbeat logs, making + them accessible to relay operators. + + We do not propose to collect additional statistics on: + * bridges, + * address resolution, + * circuit counts, or + * failure rates. + Collecting statistics like these could impact user privacy, or relay + security. + +7. Changes to Other Proposals + + [Proposal 306: Client Auto IPv6 Connections] needs to be modified to keep + bridge IPv6 behaviour in sync with client IPv6 behaviour. (See section + 3.2.6.) + +References: + +[getaddrinfo man page]: See the quoted section in https://stackoverflow.com/a/42351676 + +[Proposal 306: Client Auto IPv6 Connections]: One possible design for automatic client IPv4 and IPv6 connections is at https://gitweb.torproject.org/torspec.git/tree/proposals/306-ipv6-happy-eyeballs.txt (TODO: modify to include bridge changes with client changes) + +[Proposal 311: Relay IPv6 Reachability]: https://gitweb.torproject.org/torspec.git/tree/proposals/311-relay-ipv6-reachability.txt + +[Proposal 313: Relay IPv6 Statistics]: https://gitweb.torproject.org/torspec.git/tree/proposals/313-relay-ipv6-stats.txt (TODO) + +[RFC 6177: IPv6 End Site Address Assignment]: https://tools.ietf.org/html/rfc6177#page-7 + +[Ticket 12377: Prefer default route when checking local interface addresses]: https://trac.torproject.org/projects/tor/ticket/12377 + +[Ticket 33018: Dir auths using an unsustainable 400+ mbit/s]: https://trac.torproject.org/projects/tor/ticket/33018 + +[Tor Directory Protocol]: (version 3) https://gitweb.torproject.org/torspec.git/tree/dir-spec.txt + +[Tor Specification]: https://gitweb.torproject.org/torspec.git/tree/tor-spec.txt + +[Tor Supported Platforms]: https://trac.torproject.org/projects/tor/wiki/org/teams/NetworkTeam/SupportedPlatforms#OSSupportlevels -- cgit v1.2.3-54-g00ecf