From 6fddd69ec0671f1b83294c1a4f15d281368aea86 Mon Sep 17 00:00:00 2001 From: Nick Mathewson Date: Tue, 31 Jan 2017 12:46:28 -0500 Subject: Start a new guard-spec.txt as a copy of prop271. Remove the old guard section of path-spec, now that guard-spec is separate. --- guard-spec.txt | 818 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 818 insertions(+) create mode 100644 guard-spec.txt (limited to 'guard-spec.txt') diff --git a/guard-spec.txt b/guard-spec.txt new file mode 100644 index 0000000..59c66b8 --- /dev/null +++ b/guard-spec.txt @@ -0,0 +1,818 @@ + Tor Guard Specification + + Isis Lovecruft + George Kadianakis + Ola Bini + Nick Mathewson + +1. Introduction and motivation + + Tor uses entry guards to prevent an attacker who controls some + fraction of the network from observing a fraction of every user's + traffic. If users chose their entries and exits uniformly at + random from the list of servers every time they build a circuit, + then an adversary who had (k/N) of the network would deanonymize + F=(k/N)^2 of all circuits... and after a given user had built C + circuits, the attacker would see them at least once with + probability 1-(1-F)^C. With large C, the attacker would get a + sample of every user's traffic with probability 1. + + To prevent this from happening, Tor clients choose a small number + of guard nodes (currently 3). These guard nodes are the only + nodes that the client will connect to directly. If they are not + compromised, the user's paths are not compromised. + + This proposal outlines Tor's current guard selection algorithm, + which tries to meet the following goals: + + - Heuristics and algorithms for determining how and which guards + are chosen should be kept as simple and easy to understand as + possible. + + - Clients in censored regions or who are behind a fascist + firewall who connect to the Tor network should not experience + any significant disadvantage in terms of reachability or + usability. + + - Tor should make a best attempt at discovering the most + appropriate behaviour, with as little user input and + configuration as possible. + + - Tor clients should discover usable guards without too much + delay. + + - Tor clients should resist (to the extent possible) attacks + that try to force them onto compromised guards. + + +2. State instances + + In the algorithm below, we describe a set of persistent and + non-persistent state variables. These variables should be + treated as an object, of which multiple instances can exist. + + In particular, we specify the use of three particular instances: + + A. UseBridges + + If UseBridges is set, then we replace the {GUARDS} set in + [Sec:GUARDS] below with the list of list of configured + bridges. We maintain a separate persistent instance of + {SAMPLED_GUARDS} and {CONFIRMED_GUARDS} and other derived + values for the UseBridges case. + + In this case, we impose no upper limit on the sample size. + + B. EntryNodes / ExcludeNodes / Reachable*Addresses / + FascistFirewall / ClientUseIPv4=0 + + If one of the above options is set, and UseBridges is not, + then we compare the fraction of usable guards in the consensus + to the total number of guards in the consensus. + + If this fraction is less than {MEANINGFUL_RESTRICTION_FRAC}, + we use a separate instance of the state. + + (While Tor is running, we do not change back and forth between + the separate instance of the state and the default instance + unless the fraction of usable guards is 5% higher than, or 5% + lower than, {MEANINGFUL_RESTRICTION_FRAC}. This prevents us + from flapping back and forth between instances if we happen to + hit {MEANINGFUL_RESTRICTION_FRAC} exactly. + + If this fraction is less than {EXTREME_RESTRICTION_FRAC}, we use a + separate instance of the state, and warn the user. + + [TODO: should we have a different instance for each set of heavily + restricted options?] + + C. Default + + If neither of the above variant-state instances is used, + we use a default instance. + +3. Circuit Creation, Entry Guard Selection (1000 foot view) + + A circuit in Tor is a path through the network connecting a client to + its destination. At a high-level, a three-hop exit circuit will look + like this: + + Client <-> Entry Guard <-> Middle Node <-> Exit Node <-> Destination + + Entry guards are the only nodes which a client will connect to + directly, Exit relays are the nodes by which traffic exists the + Tor network in order to connect to an external destination. + + 3.1 Path selection + + For any circuit, at least one entry guard and middle node(s) are + required. An exit node is required if traffic will exit the Tor + network. Depending on its configuration, a relay listed in a + consensus could be used for any of these roles. However, this + proposal defines how entry guards specifically should be selected and + managed, as opposed to middle or exit nodes. + + 3.1.1 Entry guard selection + + At a high level, a relay listed in a consensus will move through the + following states in the process from initial selection to eventual + usage as an entry guard: + + relays listed in consensus + | + sampled + | | + confirmed filtered + | | | + primary usable_filtered + + Relays listed in the latest consensus can be sampled for guard usage + if they have the "Guard" flag. Sampling is random but weighted by + bandwidth. + + Once a path is built and a circuit established using this guard, it + is marked as confirmed. Until this point, guards are first sampled + and then filtered based on information such as our current + configuration (see SAMPLED and FILTERED sections) and later marked as + usable_filtered if the guard is not primary but can be reached. + + It is always preferable to use a primary guard when building a new + circuit in order to reduce guard churn; only on failure to connect to + existing primary guards will new guards be used. + + 3.1.2 Middle and exit node selection + + Middle nodes are selected at random from relays listed in the + latest consensus, weighted by bandwidth. Exit nodes are chosen + similarly but restricted to relays with an exit policy. + + 3.2 Circuit Building + + Once a path is chosen, Tor will use this path to build a new circuit. + + If the circuit is built successfully, it either can be used + immediately or wait for a better guard, depending on whether other + circuits already exist with higher-priority guards. + + If at any point the circuit fails, the guard is marked as + unreachable, the circuit is closed, and waiting circuits are updated. + +4. The algorithm. + +4.0. The guards listed in the current consensus. [Section:GUARDS] + + By {set:GUARDS} we mean the set of all guards in the current + consensus that are usable for all circuits and directory + requests. (They must have the flags: Stable, Fast, V2Dir, Guard.) + + **Rationale** + + We require all guards to have the flags that we potentially need + from any guard, so that all guards are usable for all circuits. + +4.1. The Sampled Guard Set. [Section:SAMPLED] + + We maintain a set, {set:SAMPLED_GUARDS}, that persists across + invocations of Tor. It is an unordered subset of the nodes that + we have seen listed as a guard in the consensus at some point. + For each such guard, we record persistently: + + - {pvar:ADDED_ON_DATE}: The date on which it was added to + sampled_guards. + + We base this value on RAND(now, {GUARD_LIFETIME}/10). See + Appendix [RANDOM] below. + + - {pvar:ADDED_BY_VERSION}: The version of Tor that added it to + sampled_guards. + + - {pvar:IS_LISTED}: Whether it was listed as a usable Guard in + the _most recent_ consensus we have seen. + + - {pvar:FIRST_UNLISTED_AT}: If IS_LISTED is false, the publication date + of the earliest consensus in which this guard was listed such that we + have not seen it listed in any later consensus. Otherwise "None." + We randomize this, based on + RAND(added_at_time, {REMOVE_UNLISTED_GUARDS_AFTER} / 5) + + For each guard in {SAMPLED_GUARDS}, we also record this data, + non-persistently: + + - {tvar:last_tried_connect}: A 'last tried to connect at' + time. Default 'never'. + + - {tvar:is_reachable}: an "is reachable" tristate, with + possible values { , , }. + Default '.' + + [Note: "yes" is not strictly necessary, but I'm + making it distinct from "maybe" anyway, to make our + logic clearer. A guard is "maybe" reachable if it's + worth trying. A guard is "yes" reachable if we tried + it and succeeded.] + + - {tvar:failing_since}: The first time when we failed to + connect to this guard. Defaults to "never". Reset to + "never" when we successfully connect to this guard. + + - {tvar:is_pending} A "pending" flag. This indicates that we + are trying to build an exploratory circuit through the + guard, and we don't know whether it will succeed. + + We require that {SAMPLED_GUARDS} contain at least + {MIN_FILTERED_SAMPLE} guards from the consensus (if possible), + but not more than {MAX_SAMPLE_THRESHOLD} of the number of guards + in the consensus, and not more then {MAX_SAMPLE_SIZE} in total. + (But if the maximum would be smaller than {MIN_FILTERED_SAMPLE}, we + set the maximum at {MIN_FILTERED_SAMPLE}.) + + To add a new guard to {SAMPLED_GUARDS}, pick an entry at random + from ({GUARDS} - {SAMPLED_GUARDS}), weighted by bandwidth. + + We remove an entry from {SAMPLED_GUARDS} if: + + * We have a live consensus, and {IS_LISTED} is false, and + {FIRST_UNLISTED_AT} is over {REMOVE_UNLISTED_GUARDS_AFTER} + days in the past. + + OR + + * We have a live consensus, and {ADDED_ON_DATE} is over + {GUARD_LIFETIME} ago, *and* {CONFIRMED_ON_DATE} is either + "never", or over {GUARD_CONFIRMED_MIN_LIFETIME} ago. + + Note that {SAMPLED_GUARDS} does not depend on our configuration. + It is possible that we can't actually connect to any of these + guards. + + **Rationale** + + The {SAMPLED_GUARDS} set is meant to limit the total number of + guards that a client will connect to in a given period. The + upper limit on its size prevents us from considering too many + guards. + + The first expiration mechanism is there so that our + {SAMPLED_GUARDS} list does not accumulate so many dead + guards that we cannot add new ones. + + The second expiration mechanism makes us rotate our guards slowly + over time. + + +4.2. The Usable Sample [Section:FILTERED] + + We maintain another set, {set:FILTERED_GUARDS}, that does not + persist. It is derived from: + - {SAMPLED_GUARDS} + - our current configuration, + - the path bias information. + + A guard is a member of {set:FILTERED_GUARDS} if and only if all + of the following are true: + + - It is a member of {SAMPLED_GUARDS}, with {IS_LISTED} set to + true. + - It is not disabled because of path bias issues. + - It is not disabled because of ReachableAddress police, + the ClientUseIPv4 setting, the ClientUseIPv6 setting, + the FascistFirewall setting, or some other + option that prevents using some addresses. + - It is not disabled because of ExcludeNodes. + - It is a bridge if UseBridges is true; or it is not a + bridge if UseBridges is false. + - Is included in EntryNodes if EntryNodes is set and + UseBridges is not. (But see 2.B above). + + We have an additional subset, {set:USABLE_FILTERED_GUARDS}, which + is defined to be the subset of {FILTERED_GUARDS} where + {is_reachable} is or . + + We try to maintain a requirement that {USABLE_FILTERED_GUARDS} + contain at least {MIN_FILTERED_SAMPLE} elements: + + Whenever we are going to sample from {USABLE_FILTERED_GUARDS}, + and it contains fewer than {MIN_FILTERED_SAMPLE} elements, we + add new elements to {SAMPLED_GUARDS} until one of the following + is true: + + * {USABLE_FILTERED_GUARDS} is large enough, + OR + * {SAMPLED_GUARDS} is at its maximum size. + + + ** Rationale ** + + These filters are applied _after_ sampling: if we applied them + before the sampling, then our sample would reflect the set of + filtering restrictions that we had in the past. + +4.3. The confirmed-guard list. [Section:CONFIRMED] + + [formerly USED_GUARDS] + + We maintain a persistent ordered list, {list:CONFIRMED_GUARDS}. + It contains guards that we have used before, in our preference + order of using them. It is a subset of {SAMPLED_GUARDS}. For + each guard in this list, we store persistently: + + - {pvar:IDENTITY} Its fingerprint + + - {pvar:CONFIRMED_ON_DATE} When we added this guard to + {CONFIRMED_GUARDS}. + + Randomized as RAND(now, {GUARD_LIFETIME}/10). + + We add new members to {CONFIRMED_GUARDS} when we mark a circuit + built through a guard as "for user traffic." + + Whenever we remove a member from {SAMPLED_GUARDS}, we also remove + it from {CONFIRMED_GUARDS}. + + [Note: You can also regard the {CONFIRMED_GUARDS} list as a + total ordering defined over a subset of {SAMPLED_GUARDS}.] + + Definition: we call Guard A "higher priority" than another Guard B + if, when A and B are both reachable, we would rather use A. We + define priority as follows: + + * Every guard in {CONFIRMED_GUARDS} has a higher priority + than every guard not in {CONFIRMED_GUARDS}. + + * Among guards in {CONFIRMED_GUARDS}, the one appearing earlier + on the {CONFIRMED_GUARDS} list has a higher priority. + + * Among guards that do not appear in {CONFIRMED_GUARDS}, + {is_pending}==true guards have higher priority. + + * Among those, the guard with earlier {last_tried_connect} time + have higher priority. + + * Finally, among guards that do not appear in + {CONFIRMED_GUARDS} with {is_pending==false}, all have equal + priority. + + ** Rationale ** + + We add elements to this ordering when we have actually used them + for building a usable circuit. We could mark them at some other + time (such as when we attempt to connect to them, or when we + actually connect to them), but this approach keeps us from + committing to a guard before we actually use it for sensitive + traffic. + +4.4. The Primary guards [Section:PRIMARY] + + We keep a run-time non-persistent ordered list of + {list:PRIMARY_GUARDS}. It is a subset of {FILTERED_GUARDS}. It + contains {N_PRIMARY_GUARDS} elements. + + To compute primary guards, take the ordered intersection of + {CONFIRMED_GUARDS} and {FILTERED_GUARDS}, and take the first + {N_PRIMARY_GUARDS} elements. If there are fewer than + {N_PRIMARY_GUARDS} elements, add additional elements to + PRIMARY_GUARDS chosen _uniformly_ at random from + ({FILTERED_GUARDS} - {CONFIRMED_GUARDS}). + + Once an element has been added to {PRIMARY_GUARDS}, we do not remove it + until it is replaced by some element from {CONFIRMED_GUARDS}. Confirmed + elements always proceed unconfirmed ones in the {PRIMARY_GUARDS} list. + + Note that {PRIMARY_GUARDS} do not have to be in + {USABLE_FILTERED_GUARDS}: they might be unreachable. + + ** Rationale ** + + These guards are treated differently from other guards. If one of + them is usable, then we use it right away. For other guards + {FILTERED_GUARDS}, if it's usable, then before using it we might + first double-check whether perhaps one of the primary guards is + usable after all. + +4.5. Retrying guards. [Section:RETRYING] + + (We run this process as frequently as needed. It can be done once + a second, or just-in-time.) + + If a primary sampled guard's {is_reachable} status is , then + we decide whether to update its {is_reachable} status to + based on its {last_tried_connect} time, its {failing_since} time, + and the {PRIMARY_GUARDS_RETRY_SCHED} schedule. + + If a non-primary sampled guard's {is_reachable} status is , then + we decide whether to update its {is_reachable} status to + based on its {last_tried_connect} time, its {failing_since} time, + and the {GUARDS_RETRY_SCHED} schedule. + + ** Rationale ** + + An observation that a guard has been 'unreachable' only lasts for + a given amount of time, since we can't infer that it's unreachable + now from the fact that it was unreachable a few minutes ago. + +4.6. Selecting guards for circuits. [Section:SELECTING] + + Every origin circuit is now in one of these states: + , + , + , or + . + + You may only attach streams to circuits. + (Additionally, you may only send RENDEZVOUS cells, ESTABLISH_INTRO + cells, and INTRODUCE cells on circuits.) + + The per-circuit state machine is: + + New circuits are or + . + + A circuit may become , or may + fail. + + A circuit may become + ; may become ; or may + fail. + + A circuit will become , or will + be closed, or will fail. + + A circuit remains until it fails or is + closed. + + Each of these transitions is described below. + + We keep, as global transient state: + + * {tvar:last_time_on_internet} -- the last time at which we + successfully used a circuit or connected to a guard. At + startup we set this to "infinitely far in the past." + + When we want to build a circuit, and we need to pick a guard: + + * If any entry in PRIMARY_GUARDS has {is_reachable} status of + or , return the first such guard. The circuit is + . + + [Note: We do not use {is_pending} on primary guards, since we + are willing to try to build multiple circuits through them + before we know for sure whether they work, and since we will + not use any non-primary guards until we are sure that the + primary guards are all down. (XX is this good?)] + + * Otherwise, if the ordered intersection of {CONFIRMED_GUARDS} + and {USABLE_FILTERED_GUARDS} is nonempty, return the first + entry in that intersection that has {is_pending} set to + false. Set its value of {is_pending} to true. The circuit + is now . (If all entries have + {is_pending} true, pick the first one.) + + * Otherwise, if there is no such entry, select a member at + random from {USABLE_FILTERED_GUARDS}. Set its {is_pending} + field to true. The circuit is . + + We update the {last_tried_connect} time for the guard to 'now.' + + In some cases (for example, when we need a certain directory feature, + or when we need to avoid using a certain exit as a guard), we need to + restrict the guards that we use for a single circuit. When this happens, we + remember the restrictions that applied when choosing the guard for + that circuit, since we will need them later (see [UPDATE_WAITING].). + + ** Rationale ** + + We're getting to the core of the algorithm here. Our main goals are to + make sure that + 1. If it's possible to use a primary guard, we do. + 2. We probably use the first primary guard. + + So we only try non-primary guards if we're pretty sure that all + the primary guards are down, and we only try a given primary guard + if the earlier primary guards seem down. + + When we _do_ try non-primary guards, however, we only build one + circuit through each, to give it a chance to succeed or fail. If + ever such a circuit succeeds, we don't use it until we're pretty + sure that it's the best guard we're getting. (see below). + + [XXX timeout.] + +4.7. When a circuit fails. [Section:ON_FAIL] + + When a circuit fails in a way that makes us conclude that a guard + is not reachable, we take the following steps: + + * We set the guard's {is_reachable} status to . If it had + {is_pending} set to true, we make it non-pending. + + * We close the circuit, of course. (This removes it from + consideration by the algorithm in [UPDATE_WAITING].) + + * Update the list of waiting circuits. (See [UPDATE_WAITING] + below.) + + [Note: the existing Tor logic will cause us to create more + circuits in response to some of these steps; and also see + [ON_CONSENSUS].] + + ** Rationale ** + + See [SELECTING] above for rationale. + +4.8. When a circuit succeeds [Section:ON_SUCCESS] + + When a circuit succeeds in a way that makes us conclude that a + guard _was_ reachable, we take these steps: + + * We set its {is_reachable} status to . + * We set its {failing_since} to "never". + * If the guard was {is_pending}, we clear the {is_pending} flag. + * If the guard was not a member of {CONFIRMED_GUARDS}, we add + it to the end of {CONFIRMED_GUARDS}. + + * If this circuit was , this circuit is + now . You may attach streams to this circuit, + and use it for hidden services. + + * If this circuit was , it is now + . You may not yet attach streams to it. + Then check whether the {last_time_on_internet} is more than + {INTERNET_LIKELY_DOWN_INTERVAL} seconds ago: + + * If it is, then mark all {PRIMARY_GUARDS} as "maybe" + reachable. + + * If it is not, update the list of waiting circuits. (See + [UPDATE_WAITING] below) + + [Note: the existing Tor logic will cause us to create more + circuits in response to some of these steps; and see + [ON_CONSENSUS].] + + ** Rationale ** + + See [SELECTING] above for rationale. + +4.9. Updating the list of waiting circuits [Section:UPDATE_WAITING] + + We run this procedure whenever it's possible that a + circuit might be ready to be called + . + + * If any circuit C1 is , AND: + * All primary guards have reachable status of . + * There is no circuit C2 that "blocks" C1. + Then, upgrade C1 to . + + Definition: In the algorithm above, C2 "blocks" C1 if: + * C2 obeys all the restrictions that C1 had to obey, AND + * C2 has higher priority than C1, AND + * Either C2 is , or C2 is , + or C2 has been for no more than + {NONPRIMARY_GUARD_CONNECT_TIMEOUT} seconds. + + We run this procedure periodically: + + * If any circuit stays is + for more than {NONPRIMARY_GUARD_IDLE_TIMEOUT} seconds, + time it out. + + **Rationale** + + If we open a connection to a guard, we might want to use it + immediately (if we're sure that it's the best we can do), or we + might want to wait a little while to see if some other circuit + which we like better will finish. + + + When we mark a circuit , we don't close the + lower-priority circuits immediately: we might decide to use + them after all if the circuit goes down before + {NONPRIMARY_GUARD_IDLE_TIMEOUT} seconds. + +4.10. Whenever we get a new consensus. [Section:ON_CONSENSUS] + + We update {GUARDS}. + + For every guard in {SAMPLED_GUARDS}, we update {IS_LISTED} and + {FIRST_UNLISTED_AT}. + + [**] We remove entries from {SAMPLED_GUARDS} if appropriate, + according to the sampled-guards expiration rules. If they were + in {CONFIRMED_GUARDS}, we also remove them from + {CONFIRMED_GUARDS}. + + We recompute {FILTERED_GUARDS}, and everything that derives from + it, including {USABLE_FILTERED_GUARDS}, and {PRIMARY_GUARDS}. + + (Whenever one of the configuration options that affects the + filter is updated, we repeat the process above, starting at the + [**] line.) + +4.11. Deciding whether to generate a new circuit. + [Section:NEW_CIRCUIT_NEEDED] + + In current Tor, we generate a new circuit when we don't have + enough circuits either built or in-progress to handle a given + stream, or an expected stream. + + For the purpose of this rule, we say that + circuits are neither built nor in-progress; that + circuits are built; and that the other states are in-progress. + +A. Appendices + +A.1. Parameters with suggested values. [Section:PARAM_VALS] + + (All suggested values chosen arbitrarily) + + {param:MAX_SAMPLE_THRESHOLD} -- 20% + + {param:MAX_SAMPLE_SIZE} -- 60 + + {param:GUARD_LIFETIME} -- 120 days + + {param:REMOVE_UNLISTED_GUARDS_AFTER} -- 20 days + [previously ENTRY_GUARD_REMOVE_AFTER] + + {param:MIN_FILTERED_SAMPLE} -- 20 + + {param:N_PRIMARY_GUARDS} -- 3 + + {param:PRIMARY_GUARDS_RETRY_SCHED} + -- every 30 minutes for the first 6 hours. + -- every 2 hours for the next 3.75 days. + -- every 4 hours for the next 3 days. + -- every 9 hours thereafter. + + {param:GUARDS_RETRY_SCHED} -- 1 hour + -- every hour for the first 6 hours. + -- every 4 hours for the next 3.75 days. + -- every 18 hours for the next 3 days. + -- every 36 hours thereafter. + + {param:INTERNET_LIKELY_DOWN_INTERVAL} -- 10 minutes + + {param:NONPRIMARY_GUARD_CONNECT_TIMEOUT} -- 15 seconds + + {param:NONPRIMARY_GUARD_IDLE_TIMEOUT} -- 10 minutes + + {param:MEANINGFUL_RESTRICTION_FRAC} -- .2 + + {param:EXTREME_RESTRICTION_FRAC} -- .01 + + {param:GUARD_CONFIRMED_MIN_LIFETIME} -- 60 days + +A.2. Random values [Section:RANDOM] + + Frequently, we want to randomize the expiration time of something + so that it's not easy for an observer to match it to its start + time. We do this by randomizing its start date a little, so that + we only need to remember a fixed expiration interval. + + By RAND(now, INTERVAL) we mean a time between now and INTERVAL in + the past, chosen uniformly at random. + + +A.3. Why not a sliding scale of primaryness? [Section:CVP] + + At one meeting, I floated the idea of having "primaryness" be a + continuous variable rather than a boolean. + + I'm no longer sure this is a great idea, but I'll try to outline + how it might work. + + To begin with: being "primary" gives it a few different traits: + + 1) We retry primary guards more frequently. [Section:RETRYING] + + 2) We don't even _try_ building circuits through + lower-priority guards until we're pretty sure that the + higher-priority primary guards are down. (With non-primary + guards, on the other hand, we launch exploratory circuits + which we plan not to use if higher-priority guards + succeed.) [Section:SELECTING] + + 3) We retry them all one more time if a circuit succeeds after + the net has been down for a while. [Section:ON_SUCCESS] + + We could make each of the above traits continuous: + + 1) We could make the interval at which a guard is retried + depend continuously on its position in CONFIRMED_GUARDS. + + 2) We could change the number of guards we test in parallel + based on their position in CONFIRMED_GUARDS. + + 3) We could change the rule for how long the higher-priority + guards need to have been down before we call a + circuit based on a + possible network-down condition. For example, we could + retry the first guard if we tried it more than 10 seconds + ago, the second if we tried it more than 20 seconds ago, + etc. + + I am pretty sure, however, that if these are worth doing, they + need more analysis! Here's why: + + * They all have the potential to leak more information about a + guard's exact position on the list. Is that safe? Is there + any way to exploit that? I don't think we know. + + * They all seem like changes which it would be relatively + simple to make to the code after we implement the simpler + version of the algorithm described above. + +A.3. Controller changes + + We will add to control-spec.txt a new possible circuit state, GUARD_WAIT, + that can be given as part of circuit events and GETINFO responses about + circuits. A circuit is in the GUARD_WAIT state when it is fully built, + but we will not use it because a circuit with a better guard might + become built too. + +A.4. Persistent state format + + The persistent state format doesn't need to be part of this + proposal, since different implementations can do it + differently. Nonetheless, here's the one Tor uses: + + The "state" file contains one Guard entry for each sampled guard + in each instance of the guard state (see section 2). The value + of this Guard entry is a set of space-separated K=V entries, + where K contains any nonspace character except =, and V contains + any nonspace characters. + + Implementations must retain any unrecognized K=V entries for a + sampled guard when the regenerate the state file. + + The order of K=V entries is not allowed to matter. + + Recognized fields (values of K) are: + + "in" -- the name of the guard state instance that this + sampled guard is in. If a sampled guard is in two guard + states instances, it appears twice, with a different "in" + field each time. Required. + + "rsa_id" -- the RSA id digest for this guard, encoded in + hex. Required. + + "bridge_addr" -- If the guard is a bridge, its configured + address and OR port. Optional. + + "nickname" -- the guard's nickname, if any. Optional. + + "sampled_on" -- the date when the guard was sampled. Required. + + "sampled_by" -- the Tor version that sampled this guard. + Optional. + + "unlisted_since" -- the date since which the guard has been + unlisted. Optional. + + "listed" -- 0 if the guard is not listed ; 1 if it is. Required. + + "confirmed_on" -- date when the guard was + confirmed. Optional. + + "confirmed_idx" -- position of the guard in the confirmed + list. Optional. + + "pb_use_attempts", "pb_use_successes", "pb_circ_attempts", + "pb_circ_successes", "pb_successful_circuits_closed", + "pb_collapsed_circuits", "pb_unusable_circuits", + "pb_timeouts" -- state for the circuit path bias algorithm, + given in decimal fractions. Optional. + + All dates here are given as a (spaceless) ISO8601 combined date + and time in UTC (e.g., 2016-11-29T19:39:31). + + +TODO. Still non-addressed issues [Section:TODO] + + Simulate to answer: Will this work in a dystopic world? + + Simulate actual behavior. + + For all lifetimes: instead of storing the "this began at" time, + store the "remove this at" time, slightly randomized. + + Clarify that when you get a circuit, you might need to + relaunch circuits through that same guard immediately, if they + are circuits that have to be independent. + + + Fix all items marked XX or TODO. + + "Directory guards" -- do they matter? + + Suggestion: require that all guards support downloads via BEGINDIR. + We don't need to worry about directory guards for relays, since we + aren't trying to prevent relay enumeration. + + IP version preferenes via ClientPreferIPv6ORPort + + Suggestion: Treat it as a preference when adding to + {CONFIRMED_GUARDS}, but not otherwise. + -- cgit v1.2.3-54-g00ecf