From 2e1fe1fcf93c2a77805048bea5c535ca4456d583 Mon Sep 17 00:00:00 2001 From: Nick Mathewson Date: Sun, 16 Jun 2013 09:55:44 -0400 Subject: Implement a real OOM-killer for too-long circuit queues. This implements "algorithm 1" from my discussion of bug #9072: on OOM, find the circuits with the longest queues, and kill them. It's also a fix for #9063 -- without the side-effects of bug #9072. The memory bounds aren't perfect here, and you need to be sure to allow some slack for the rest of Tor's usage. This isn't a perfect fix; the rest of the solutions I describe on codeable. --- changes/bug9063_redux | 15 ++++++++ doc/tor.1.txt | 9 +++++ src/common/mempool.h | 2 + src/or/circuitlist.c | 102 ++++++++++++++++++++++++++++++++++++++++++++++++++ src/or/circuitlist.h | 1 + src/or/config.c | 7 ++++ src/or/or.h | 4 ++ src/or/relay.c | 33 +++++++++++++++- src/or/relay.h | 1 + 9 files changed, 172 insertions(+), 2 deletions(-) create mode 100644 changes/bug9063_redux diff --git a/changes/bug9063_redux b/changes/bug9063_redux new file mode 100644 index 0000000000..e6fae72efc --- /dev/null +++ b/changes/bug9063_redux @@ -0,0 +1,15 @@ + o Major bugfixes: + - When we have too much memory queued in circuits (according to a new + MaxMemInCellQueues option), close the circuits consuming the most + memory. This prevents us from running out of memory as a relay if + circuits fill up faster than they can be drained. Fixes + bug 9063; bugfix on the 54th commit of Tor. This bug is a further + fix beyond bug 6252, whose fix was merged into 0.2.3.21-rc. + + Also fixes an earlier approach taken in 0.2.4.13-alpha, where we + tried to solve this issue simply by imposing an upper limit on the + number of queued cells for a single circuit. That approach proved to + be problematic, since there are ways to provoke clients to send a + number of cells in excess of any such reasonable limit. + Fixes bug 9072; bugfix on 0.2.4.13-alpha. + diff --git a/doc/tor.1.txt b/doc/tor.1.txt index 773fccf536..1f3afef2ac 100644 --- a/doc/tor.1.txt +++ b/doc/tor.1.txt @@ -1475,6 +1475,15 @@ is non-zero): localhost, RFC1918 addresses, and so on. This can create security issues; you should probably leave it off. (Default: 0) +**MaxMemInCellQueues** __N__ **bytes**|**KB**|**MB**|**GB**:: + This option configures a threshold above which Tor will assume that it + needs to stop queueing cells because it's about to run out of memory. + If it hits this threshold, it will begin killing circuits until it + has recovered at least 10% of this memory. Do not set this option too + low, or your relay may be unreliable under load. This option only + effects circuit queues, so the actual process size will be larger than + this. (Default: 8GB) + DIRECTORY SERVER OPTIONS ------------------------ diff --git a/src/common/mempool.h b/src/common/mempool.h index d0a7bc2f36..bc424acdeb 100644 --- a/src/common/mempool.h +++ b/src/common/mempool.h @@ -22,6 +22,8 @@ void mp_pool_destroy(mp_pool_t *pool); void mp_pool_assert_ok(mp_pool_t *pool); void mp_pool_log_status(mp_pool_t *pool, int severity); +#define MP_POOL_ITEM_OVERHEAD (sizeof(void*)) + #define MEMPOOL_STATS #ifdef MEMPOOL_PRIVATE diff --git a/src/or/circuitlist.c b/src/or/circuitlist.c index 93ba69dcf0..d9ea4d1b51 100644 --- a/src/or/circuitlist.c +++ b/src/or/circuitlist.c @@ -1359,6 +1359,108 @@ _circuit_mark_for_close(circuit_t *circ, int reason, int line, } } +/** Given a marked circuit circ, aggressively free its cell queues to + * recover memory. */ +static void +marked_circuit_free_cells(circuit_t *circ) +{ + if (!circ->marked_for_close) { + log_warn(LD_BUG, "Called on non-marked circuit"); + return; + } + cell_queue_clear(&circ->n_conn_cells); + if (! CIRCUIT_IS_ORIGIN(circ)) + cell_queue_clear(& TO_OR_CIRCUIT(circ)->p_conn_cells); +} + +/** Return the number of cells used by the circuit c's cell queues. */ +static size_t +n_cells_in_circ_queues(const circuit_t *c) +{ + size_t n = c->n_conn_cells.n; + if (! CIRCUIT_IS_ORIGIN(c)) + n += TO_OR_CIRCUIT((circuit_t*)c)->p_conn_cells.n; + return n; +} + +/** helper to sort a list of circuit_q by total queue lengths, in descending + * order. */ +static int +circuits_compare_by_queue_len_(const void **a_, const void **b_) +{ + const circuit_t *a = *a_; + const circuit_t *b = *b_; + size_t a_n = n_cells_in_circ_queues(a); + size_t b_n = n_cells_in_circ_queues(b); + + if (a_n < b_n) + return 1; + else if (a_n == b_n) + return 0; + else + return -1; +} + +#define FRACTION_OF_CIRCS_TO_RETAIN_ON_OOM 0.90 + +/** We're out of memory for cells, having allocated current_allocation + * bytes' worth. Kill the 'worst' circuits until we're under + * FRACTION_OF_CIRCS_TO_RETAIN_ON_OOM of our maximum usage. */ +void +circuits_handle_oom(size_t current_allocation) +{ + /* Let's hope there's enough slack space for this allocation here... */ + smartlist_t *circlist = smartlist_new(); + circuit_t *circ; + size_t n_cells_removed=0, n_cells_to_remove; + int n_circuits_killed=0; + log_notice(LD_GENERAL, "We're low on memory. Killing circuits with " + "over-long queues. (This behavior is controlled by " + "MaxMemInCellQueues.)"); + + { + size_t mem_target = (size_t)(get_options()->MaxMemInCellQueues * + FRACTION_OF_CIRCS_TO_RETAIN_ON_OOM); + size_t mem_to_recover; + if (current_allocation <= mem_target) + return; + mem_to_recover = current_allocation - mem_target; + n_cells_to_remove = CEIL_DIV(mem_to_recover, packed_cell_mem_cost()); + } + + /* This algorithm itself assumes that you've got enough memory slack + * to actually run it. */ + for (circ = global_circuitlist; circ; circ = circ->next) + smartlist_add(circlist, circ); + + /* This is O(n log n); there are faster algorithms we could use instead. + * Let's hope this doesn't happen enough to be in the critical path. */ + smartlist_sort(circlist, circuits_compare_by_queue_len_); + + /* Okay, now the worst circuits are at the front of the list. Let's mark + * them, and reclaim their storage aggressively. */ + SMARTLIST_FOREACH_BEGIN(circlist, circuit_t *, circ) { + size_t n = n_cells_in_circ_queues(circ); + if (! circ->marked_for_close) { + circuit_mark_for_close(circ, END_CIRC_REASON_RESOURCELIMIT); + } + marked_circuit_free_cells(circ); + + ++n_circuits_killed; + n_cells_removed += n; + if (n_cells_removed >= n_cells_to_remove) + break; + } SMARTLIST_FOREACH_END(circ); + + clean_cell_pool(); /* In case this helps. */ + + log_notice(LD_GENERAL, "Removed "U64_FORMAT" bytes by killing %d circuits.", + U64_PRINTF_ARG(n_cells_removed * packed_cell_mem_cost()), + n_circuits_killed); + + smartlist_free(circlist); +} + /** Verify that cpath layer cp has all of its invariants * correct. Trigger an assert if anything is invalid. */ diff --git a/src/or/circuitlist.h b/src/or/circuitlist.h index 6e7735476b..44f0c1fe3b 100644 --- a/src/or/circuitlist.h +++ b/src/or/circuitlist.h @@ -57,6 +57,7 @@ int circuit_count_pending_on_or_conn(or_connection_t *or_conn); void assert_cpath_layer_ok(const crypt_path_t *cp); void assert_circuit_ok(const circuit_t *c); void circuit_free_all(void); +void circuits_handle_oom(size_t current_allocation); #endif diff --git a/src/or/config.c b/src/or/config.c index 90a5dfbda1..d5c5689474 100644 --- a/src/or/config.c +++ b/src/or/config.c @@ -343,6 +343,7 @@ static config_var_t _option_vars[] = { V(MaxAdvertisedBandwidth, MEMUNIT, "1 GB"), V(MaxCircuitDirtiness, INTERVAL, "10 minutes"), V(MaxClientCircuitsPending, UINT, "32"), + V(MaxMemInCellQueues, MEMUNIT, "8 GB"), V(MaxOnionsPending, UINT, "100"), OBSOLETE("MonthlyAccountingStart"), V(MyFamily, STRING, NULL), @@ -3668,6 +3669,12 @@ options_validate(or_options_t *old_options, or_options_t *options, log_warn(LD_CONFIG, "EntryNodes is set, but UseEntryGuards is disabled. " "EntryNodes will be ignored."); + if (options->MaxMemInCellQueues < (500 << 20)) { + log_warn(LD_CONFIG, "MaxMemInCellQueues must be at least 500 MB for now. " + "Ideally, have it as large as you can afford."); + options->MaxMemInCellQueues = (500 << 20); + } + options->_AllowInvalid = 0; if (options->AllowInvalidNodes) { SMARTLIST_FOREACH_BEGIN(options->AllowInvalidNodes, const char *, cp) { diff --git a/src/or/or.h b/src/or/or.h index 83bf8c8900..dd95c349c0 100644 --- a/src/or/or.h +++ b/src/or/or.h @@ -3064,6 +3064,10 @@ typedef struct { config_line_t *DirPort_lines; config_line_t *DNSPort_lines; /**< Ports to listen on for DNS requests. */ + uint64_t MaxMemInCellQueues; /**< If we have more memory than this allocated + * for circuit cell queues, run the OOM handler + */ + /** @name port booleans * * Derived booleans: True iff there is a non-listener port on an AF_INET or diff --git a/src/or/relay.c b/src/or/relay.c index fdb4bff709..fda9e89ca4 100644 --- a/src/or/relay.c +++ b/src/or/relay.c @@ -1799,7 +1799,7 @@ circuit_consider_sending_sendme(circuit_t *circ, crypt_path_t *layer_hint) #endif /** The total number of cells we have allocated from the memory pool. */ -static int total_cells_allocated = 0; +static size_t total_cells_allocated = 0; /** A memory pool to allocate packed_cell_t objects. */ static mp_pool_t *cell_pool = NULL; @@ -1871,7 +1871,7 @@ dump_cell_pool_usage(int severity) ++n_circs; } log(severity, LD_MM, "%d cells allocated on %d circuits. %d cells leaked.", - n_cells, n_circs, total_cells_allocated - n_cells); + n_cells, n_circs, (int)total_cells_allocated - n_cells); mp_pool_log_status(cell_pool, severity); } @@ -1978,6 +1978,29 @@ cell_queue_pop(cell_queue_t *queue) return cell; } +/** Return the total number of bytes used for each packed_cell in a queue. + * Approximate. */ +size_t +packed_cell_mem_cost(void) +{ + return sizeof(packed_cell_t) + MP_POOL_ITEM_OVERHEAD + + get_options()->CellStatistics ? + (sizeof(insertion_time_elem_t)+MP_POOL_ITEM_OVERHEAD) : 0; +} + +/** Check whether we've got too much space used for cells. If so, + * call the OOM handler and return 1. Otherwise, return 0. */ +static int +cell_queues_check_size(void) +{ + size_t alloc = total_cells_allocated * packed_cell_mem_cost(); + if (alloc >= get_options()->MaxMemInCellQueues) { + circuits_handle_oom(alloc); + return 1; + } + return 0; +} + /** Return a pointer to the "next_active_on_{n,p}_conn" pointer of circ, * depending on whether conn matches n_conn or p_conn. */ static INLINE circuit_t ** @@ -2574,6 +2597,12 @@ append_cell_to_circuit_queue(circuit_t *circ, or_connection_t *orconn, cell_queue_append_packed_copy(queue, cell); + if (PREDICT_UNLIKELY(cell_queues_check_size())) { + /* We ran the OOM handler */ + if (circ->marked_for_close) + return; + } + /* If we have too many cells on the circuit, we should stop reading from * the edge streams for a while. */ if (!streams_blocked && queue->n >= CELL_QUEUE_HIGHWATER_SIZE) diff --git a/src/or/relay.h b/src/or/relay.h index 41675e2106..c55813b33c 100644 --- a/src/or/relay.h +++ b/src/or/relay.h @@ -40,6 +40,7 @@ void init_cell_pool(void); void free_cell_pool(void); void clean_cell_pool(void); void dump_cell_pool_usage(int severity); +size_t packed_cell_mem_cost(void); void cell_queue_clear(cell_queue_t *queue); void cell_queue_append(cell_queue_t *queue, packed_cell_t *cell); -- cgit v1.2.3-54-g00ecf