# SOME DESCRIPTIVE TITLE.
# Copyright (C) Micah Lee, et al.
# This file is distributed under the same license as the OnionShare package.
# FIRST AUTHOR <EMAIL@ADDRESS>, 2020.
#
msgid ""
msgstr ""
"Project-Id-Version: OnionShare 2.3\n"
"Report-Msgid-Bugs-To: onionshare-dev@lists.riseup.net\n"
"POT-Creation-Date: 2020-11-15 14:42-0800\n"
"PO-Revision-Date: 2022-01-11 05:54+0000\n"
"Last-Translator: Taro Tanaka <anon_japan@protonmail.com>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: ja\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Weblate 4.10.1\n"
"Generated-By: Babel 2.9.0\n"

#: ../../source/advanced.rst:2
msgid "Advanced Usage"
msgstr "先進の使用"

#: ../../source/advanced.rst:7
msgid "Save Tabs"
msgstr "タブを保存する"

#: ../../source/advanced.rst:9
msgid ""
"Everything in OnionShare is temporary by default. If you close an "
"OnionShare tab, its address no longer exists and it can't be used again. "
"Sometimes you might want an OnionShare service to be persistent. This is "
"useful if you want to host a website available from the same OnionShare "
"address even if you reboot your computer."
msgstr ""
"OnionShareのデフォルト設定では、全ての機能は一時的です。OnionShareタブを閉じると、そのアドレスは消えて再びに使えません。場合によっては"
"永続的なOnionShareサービスが必要かもしれない。例えばパソコンを再起動しても、永続的なアドレスでOnionShareウェブサイトをホストしたい場合"
"には役立つでしょう。"

#: ../../source/advanced.rst:13
msgid ""
"To make any tab persistent, check the \"Save this tab, and automatically "
"open it when I open OnionShare\" box before starting the server. When a "
"tab is saved a purple pin icon appears to the left of its server status."
msgstr ""
"タブを永続的にするのに、サービスを実行する前に「このタブを保存し、OnionShareがスタートアップの時に自動的に開く」というボックスをチェックする。保"
"存された場合、紫色のピンはタブの左側に表示されます。"

#: ../../source/advanced.rst:18
msgid ""
"When you quit OnionShare and then open it again, your saved tabs will "
"start opened. You'll have to manually start each service, but when you do"
" they will start with the same OnionShare address and password."
msgstr ""

#: ../../source/advanced.rst:21
msgid ""
"If you save a tab, a copy of that tab's onion service secret key will be "
"stored on your computer with your OnionShare settings."
msgstr "タブを保存すると、そのonionサービスの秘密鍵はOnionShare設定と一緒にパソコンに保存されます。"

#: ../../source/advanced.rst:26
msgid "Turn Off Passwords"
msgstr ""

#: ../../source/advanced.rst:28
msgid ""
"By default, all OnionShare services are protected with the username "
"``onionshare`` and a randomly-generated password. If someone takes 20 "
"wrong guesses at the password, your onion service is automatically "
"stopped to prevent a brute force attack against the OnionShare service."
msgstr ""

#: ../../source/advanced.rst:31
msgid ""
"Sometimes you might want your OnionShare service to be accessible to the "
"public, like if you want to set up an OnionShare receive service so the "
"public can securely and anonymously send you files. In this case, it's "
"better to disable the password altogether. If you don't do this, someone "
"can force your server to stop just by making 20 wrong guesses of your "
"password, even if they know the correct password."
msgstr ""

#: ../../source/advanced.rst:35
msgid ""
"To turn off the password for any tab, just check the \"Don't use a "
"password\" box before starting the server. Then the server will be public"
" and won't have a password."
msgstr ""

#: ../../source/advanced.rst:38
msgid "Scheduled Times"
msgstr "予定した時間"

#: ../../source/advanced.rst:40
msgid ""
"OnionShare supports scheduling exactly when a service should start and "
"stop. Before starting a server, click \"Show advanced settings\" in its "
"tab and then check the boxes next to either \"Start onion service at "
"scheduled time\", \"Stop onion service at scheduled time\", or both, and "
"set the respective desired dates and times."
msgstr ""
"OnionShareでは、サービスの開始・停止する時間を予定することができます。サーバーを起動する前に、そのタブに「詳細設定を表示」をクリックして、「 "
"指定の日時にonionサービスを起動する 」または「 指定の日時にonionサービスを停止する "
"」それとも両方のボックスをチェックして、希望日時を入力する。"

#: ../../source/advanced.rst:43
msgid ""
"If you scheduled a service to start in the future, when you click the "
"\"Start sharing\" button you will see a timer counting down until it "
"starts. If you scheduled it to stop in the future, after it's started you"
" will see a timer counting down to when it will stop automatically."
msgstr ""
"サービスを将来に起動するよう設定した場合、「 共有を開始 "
"」ボタンをクリックすると開始時間までの減算カウンターが表示されます。将来に停止するよう設定した場合、「 共有を開始 "
"」ボタンをクリックすると普通に開始して、停止する時間までの減算カウンターは表示されます。"

#: ../../source/advanced.rst:46
msgid ""
"**Scheduling an OnionShare service to automatically start can be used as "
"a dead man's switch**, where your service will be made public at a given "
"time in the future if anything happens to you. If nothing happens to you,"
" you can cancel the service before it's scheduled to start."
msgstr ""
"**自動的な起動を予定することで、OnionShareのサービスを「デッドマン装置」として使えます。** "
"最悪の事態が起きた場合、特定時間にサービスは自動的に立ち上がります。何も起きなかったら、立ち上がる時点の前に停止できます。"

#: ../../source/advanced.rst:51
msgid ""
"**Scheduling an OnionShare service to automatically stop can be useful to"
" limit exposure**, like if you want to share secret documents while "
"making sure they're not available on the Internet for more than a few "
"days."
msgstr ""

#: ../../source/advanced.rst:56
msgid "Command-line Interface"
msgstr "コマンドライン・インターフェース"

#: ../../source/advanced.rst:58
msgid ""
"In addition to its graphical interface, OnionShare has a command-line "
"interface."
msgstr "グラフィカル・インターフェースに加えて、OnionShareにはコマンドライン・インターフェースがあります。"

#: ../../source/advanced.rst:60
msgid ""
"You can install just the command-line version of OnionShare using "
"``pip3``::"
msgstr "``pip3``:: を利用して、OnionShareのコマンドライン版のみをインストールできます。"

#: ../../source/advanced.rst:64
msgid ""
"Note that you will also need the ``tor`` package installed. In macOS, "
"install it with: ``brew install tor``"
msgstr ""
"``tor`` パッケージもインストールする必要があるとご了承ください。macOSの場合は ``brew install tor`` "
"でインストールできます"

#: ../../source/advanced.rst:66
msgid "Then run it like this::"
msgstr "そして以下のコマンドで実行できます ::"

#: ../../source/advanced.rst:70
msgid ""
"If you installed OnionShare using the Linux Snapcraft package, you can "
"also just run ``onionshare.cli`` to access the command-line interface "
"version."
msgstr ""
"LinuxのSnapcraftパッケージでOnionShareをインストールした場合、``onionshare.cli`` "
"を実行するだけでコマンドライン・インターフェイスをアクセスできます。"

#: ../../source/advanced.rst:73
msgid "Usage"
msgstr "使用方法"

#: ../../source/advanced.rst:75
msgid ""
"You can browse the command-line documentation by running ``onionshare "
"--help``::"
msgstr "コマンドラインのドキュメンテーションを閲覧するには、 ``onionshare --help``::"

#: ../../source/advanced.rst:132
msgid "Legacy Addresses"
msgstr ""

#: ../../source/advanced.rst:134
msgid ""
"OnionShare uses v3 Tor onion services by default. These are modern onion "
"addresses that have 56 characters, for example::"
msgstr ""

#: ../../source/advanced.rst:139
msgid ""
"OnionShare still has support for v2 onion addresses, the old type of "
"onion addresses that have 16 characters, for example::"
msgstr ""

#: ../../source/advanced.rst:143
msgid ""
"OnionShare calls v2 onion addresses \"legacy addresses\", and they are "
"not recommended, as v3 onion addresses are more secure."
msgstr ""

#: ../../source/advanced.rst:145
msgid ""
"To use legacy addresses, before starting a server click \"Show advanced "
"settings\" from its tab and check the \"Use a legacy address (v2 onion "
"service, not recommended)\" box. In legacy mode you can optionally turn "
"on Tor client authentication. Once you start a server in legacy mode you "
"cannot remove legacy mode in that tab. Instead you must start a separate "
"service in a separate tab."
msgstr ""

#: ../../source/advanced.rst:150
msgid ""
"Tor Project plans to `completely deprecate v2 onion services "
"<https://blog.torproject.org/v2-deprecation-timeline>`_ on October 15, "
"2021, and legacy onion services will be removed from OnionShare before "
"then."
msgstr ""

#~ msgid "Make a symbolic link to the OnionShare command line binary line this::"
#~ msgstr ""

#~ msgid "Advanced usage"
#~ msgstr ""

#~ msgid "Save tabs"
#~ msgstr ""

#~ msgid ""
#~ "By default, everything in OnionShare is"
#~ " temporary. As soon as you close "
#~ "an OnionShare tab its address no "
#~ "longer exists and can't be used "
#~ "again. But sometimes you might want "
#~ "an OnionShare service to be persistent."
#~ " For example, this would be useful"
#~ " if you want to host a website"
#~ " that can keep the same URL "
#~ "even if you reboot your computer."
#~ msgstr ""

#~ msgid ""
#~ "When you quit OnionShare and then "
#~ "open it again, your saved tabs "
#~ "will start out open. You'll have "
#~ "to manually start each service, but "
#~ "when you do they will start with"
#~ " the same OnionShare address, and "
#~ "with the same password."
#~ msgstr ""

#~ msgid "Disable passwords"
#~ msgstr ""

#~ msgid ""
#~ "By default, all OnionShare services are"
#~ " protected with the username `onionshare`"
#~ " and a randomly-generated password. "
#~ "If someone makes 20 wrong guesses "
#~ "of the password, your onion service "
#~ "is automatically stopped to prevent a"
#~ " brute force attack against the "
#~ "OnionShare service."
#~ msgstr ""

#~ msgid ""
#~ "But sometimes you might want your "
#~ "OnionShare service to be accessible to"
#~ " the public. For example, if you "
#~ "want to set up an OnionShare "
#~ "receive service so the public can "
#~ "securely and anonymously send you files."
#~ " In this case, it's better to "
#~ "disable the password altogether. If you"
#~ " don't do this, someone can force "
#~ "your server to stop just by making"
#~ " 20 wrong guesses of your password,"
#~ " even if they know the correct "
#~ "password."
#~ msgstr ""

#~ msgid ""
#~ "To disable the password for any "
#~ "tab, just check the \"Don't use a"
#~ " password\" box before starting the "
#~ "server. Then the server will be "
#~ "public and won't have a password."
#~ msgstr ""

#~ msgid "Scheduled times"
#~ msgstr ""

#~ msgid ""
#~ "OnionShare supports scheduling exactly when"
#~ " a service should start and stop. "
#~ "Before starting server, click \"Show "
#~ "advanced settings\" in its tab and "
#~ "then check the boxes next to "
#~ "either \"Start onion service at "
#~ "scheduled time\", \"Stop onion service "
#~ "at scheduled time\", or both, and "
#~ "set the desired dates and times."
#~ msgstr ""

#~ msgid ""
#~ "If you scheduled a service to "
#~ "start in the future, when you "
#~ "click the start button you will "
#~ "see a timer counting down until it"
#~ " will start. If you scheduled it "
#~ "to stop in the future, after it's"
#~ " started you will see a timer "
#~ "counting down to when it will stop"
#~ " automatically."
#~ msgstr ""

#~ msgid ""
#~ "**Scheduling an OnionShare service to "
#~ "automatically stop can be useful to "
#~ "limit exposure**, like if you want "
#~ "to share secret documents while making"
#~ " sure they're not available on the"
#~ " internet for more than a few "
#~ "days."
#~ msgstr ""

#~ msgid "Command line interface"
#~ msgstr ""

#~ msgid ""
#~ "In addition to its graphical interface,"
#~ " OnionShare has a command line "
#~ "interface."
#~ msgstr ""

#~ msgid "Linux"
#~ msgstr ""

#~ msgid ""
#~ "If you installed OnionShare using the"
#~ " Flatpak package, unfortunately the command"
#~ " line interface isn't supported."
#~ msgstr ""

#~ msgid ""
#~ "If you installed OnionShare using an "
#~ "operating system package, you can just"
#~ " run ``onionshare`` from the terminal."
#~ msgstr ""

#~ msgid "macOS"
#~ msgstr ""

#~ msgid "Make a symbolic link to the OnionShare command line binary like this::"
#~ msgstr ""

#~ msgid "Now you can run ``onionshare`` from the terminal."
#~ msgstr ""

#~ msgid "Windows"
#~ msgstr ""

#~ msgid "The command line interface isn't supported in Windows."
#~ msgstr ""

#~ msgid ""
#~ "If you really want to use it "
#~ "anyway, you can set up a Windows"
#~ " development environment (see "
#~ ":ref:`starting_development`) and then run this"
#~ " in a command prompt::"
#~ msgstr ""

#~ msgid ""
#~ "You can see command line documentation"
#~ " by running ``onionshare --help``::"
#~ msgstr ""

#~ msgid "Legacy addresses"
#~ msgstr ""

#~ msgid ""
#~ "But it still has support for v2"
#~ " onion addresses, the old type of "
#~ "onion addresses that have 16 characters,"
#~ " for example::"
#~ msgstr ""

#~ msgid ""
#~ "OnionShare calls v2 onion addresses "
#~ "\"legacy addresses\". v3 onion addresses "
#~ "are more secure, and using legacy "
#~ "addresses is not recommended."
#~ msgstr ""

#~ msgid ""
#~ "To use legacy addresses, before starting"
#~ " a server click \"Show advanced "
#~ "settings\" in its tab and check "
#~ "the \"Use a legacy address (v2 "
#~ "onion service, not recommended)\" box. "
#~ "In legacy mode you can optionally "
#~ "enable Tor client authentication. Once "
#~ "you start a server in legacy mode"
#~ " you cannot remove legacy mode in "
#~ "that tab. Instead you must start a"
#~ " separate service in a separate tab."
#~ msgstr ""

#~ msgid ""
#~ "Tor Project plans to `completely "
#~ "deprecate v2 onion services "
#~ "<https://blog.torproject.org/v2-deprecation-timeline>`_ on"
#~ " October 15, 2021, and legacy onion"
#~ " services will soon be removed from"
#~ " OnionShare as well."
#~ msgstr ""