From e3e992b54315a4d8e9bf446dab17ebde280903e1 Mon Sep 17 00:00:00 2001 From: Reyk Floeter Date: Fri, 25 Jul 2014 23:06:46 +0200 Subject: add rfc7234: caching --- rfc/rfc7234.txt | 2411 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2411 insertions(+) create mode 100644 rfc/rfc7234.txt diff --git a/rfc/rfc7234.txt b/rfc/rfc7234.txt new file mode 100644 index 0000000..d1c336f --- /dev/null +++ b/rfc/rfc7234.txt @@ -0,0 +1,2411 @@ + + + + + + +Internet Engineering Task Force (IETF) R. Fielding, Ed. +Request for Comments: 7234 Adobe +Obsoletes: 2616 M. Nottingham, Ed. +Category: Standards Track Akamai +ISSN: 2070-1721 J. Reschke, Ed. + greenbytes + June 2014 + + + Hypertext Transfer Protocol (HTTP/1.1): Caching + +Abstract + + The Hypertext Transfer Protocol (HTTP) is a stateless application- + level protocol for distributed, collaborative, hypertext information + systems. This document defines HTTP caches and the associated header + fields that control cache behavior or indicate cacheable response + messages. + +Status of This Memo + + This is an Internet Standards Track document. + + This document is a product of the Internet Engineering Task Force + (IETF). It represents the consensus of the IETF community. It has + received public review and has been approved for publication by the + Internet Engineering Steering Group (IESG). Further information on + Internet Standards is available in Section 2 of RFC 5741. + + Information about the current status of this document, any errata, + and how to provide feedback on it may be obtained at + http://www.rfc-editor.org/info/rfc7234. + + + + + + + + + + + + + + + + + + + +Fielding, et al. Standards Track [Page 1] + +RFC 7234 HTTP/1.1 Caching June 2014 + + +Copyright Notice + + Copyright (c) 2014 IETF Trust and the persons identified as the + document authors. All rights reserved. + + This document is subject to BCP 78 and the IETF Trust's Legal + Provisions Relating to IETF Documents + (http://trustee.ietf.org/license-info) in effect on the date of + publication of this document. Please review these documents + carefully, as they describe your rights and restrictions with respect + to this document. Code Components extracted from this document must + include Simplified BSD License text as described in Section 4.e of + the Trust Legal Provisions and are provided without warranty as + described in the Simplified BSD License. + + This document may contain material from IETF Documents or IETF + Contributions published or made publicly available before November + 10, 2008. The person(s) controlling the copyright in some of this + material may not have granted the IETF Trust the right to allow + modifications of such material outside the IETF Standards Process. + Without obtaining an adequate license from the person(s) controlling + the copyright in such materials, this document may not be modified + outside the IETF Standards Process, and derivative works of it may + not be created outside the IETF Standards Process, except to format + it for publication as an RFC or to translate it into languages other + than English. + +Table of Contents + + 1. Introduction ....................................................4 + 1.1. Conformance and Error Handling .............................4 + 1.2. Syntax Notation ............................................4 + 1.2.1. Delta Seconds .......................................5 + 2. Overview of Cache Operation .....................................5 + 3. Storing Responses in Caches .....................................6 + 3.1. Storing Incomplete Responses ...............................7 + 3.2. Storing Responses to Authenticated Requests ................7 + 3.3. Combining Partial Content ..................................8 + 4. Constructing Responses from Caches ..............................8 + 4.1. Calculating Secondary Keys with Vary .......................9 + 4.2. Freshness .................................................11 + 4.2.1. Calculating Freshness Lifetime .....................12 + 4.2.2. Calculating Heuristic Freshness ....................13 + 4.2.3. Calculating Age ....................................13 + 4.2.4. Serving Stale Responses ............................15 + 4.3. Validation ................................................16 + 4.3.1. Sending a Validation Request .......................16 + 4.3.2. Handling a Received Validation Request .............16 + + + +Fielding, et al. Standards Track [Page 2] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + 4.3.3. Handling a Validation Response .....................18 + 4.3.4. Freshening Stored Responses upon Validation ........18 + 4.3.5. Freshening Responses via HEAD ......................19 + 4.4. Invalidation ..............................................20 + 5. Header Field Definitions .......................................21 + 5.1. Age .......................................................21 + 5.2. Cache-Control .............................................21 + 5.2.1. Request Cache-Control Directives ...................22 + 5.2.2. Response Cache-Control Directives ..................24 + 5.2.3. Cache Control Extensions ...........................27 + 5.3. Expires ...................................................28 + 5.4. Pragma ....................................................29 + 5.5. Warning ...................................................29 + 5.5.1. Warning: 110 - "Response is Stale" .................31 + 5.5.2. Warning: 111 - "Revalidation Failed" ...............31 + 5.5.3. Warning: 112 - "Disconnected Operation" ............31 + 5.5.4. Warning: 113 - "Heuristic Expiration" ..............31 + 5.5.5. Warning: 199 - "Miscellaneous Warning" .............32 + 5.5.6. Warning: 214 - "Transformation Applied" ............32 + 5.5.7. Warning: 299 - "Miscellaneous Persistent Warning" ..32 + 6. History Lists ..................................................32 + 7. IANA Considerations ............................................32 + 7.1. Cache Directive Registry ..................................32 + 7.1.1. Procedure ..........................................32 + 7.1.2. Considerations for New Cache Control Directives ....33 + 7.1.3. Registrations ......................................33 + 7.2. Warn Code Registry ........................................34 + 7.2.1. Procedure ..........................................34 + 7.2.2. Registrations ......................................34 + 7.3. Header Field Registration .................................34 + 8. Security Considerations ........................................35 + 9. Acknowledgments ................................................36 + 10. References ....................................................36 + 10.1. Normative References .....................................36 + 10.2. Informative References ...................................37 + Appendix A. Changes from RFC 2616 .................................38 + Appendix B. Imported ABNF .........................................39 + Appendix C. Collected ABNF ........................................39 + Index .............................................................41 + + + + + + + + + + + + +Fielding, et al. Standards Track [Page 3] + +RFC 7234 HTTP/1.1 Caching June 2014 + + +1. Introduction + + HTTP is typically used for distributed information systems, where + performance can be improved by the use of response caches. This + document defines aspects of HTTP/1.1 related to caching and reusing + response messages. + + An HTTP cache is a local store of response messages and the subsystem + that controls storage, retrieval, and deletion of messages in it. A + cache stores cacheable responses in order to reduce the response time + and network bandwidth consumption on future, equivalent requests. + Any client or server MAY employ a cache, though a cache cannot be + used by a server that is acting as a tunnel. + + A shared cache is a cache that stores responses to be reused by more + than one user; shared caches are usually (but not always) deployed as + a part of an intermediary. A private cache, in contrast, is + dedicated to a single user; often, they are deployed as a component + of a user agent. + + The goal of caching in HTTP/1.1 is to significantly improve + performance by reusing a prior response message to satisfy a current + request. A stored response is considered "fresh", as defined in + Section 4.2, if the response can be reused without "validation" + (checking with the origin server to see if the cached response + remains valid for this request). A fresh response can therefore + reduce both latency and network overhead each time it is reused. + When a cached response is not fresh, it might still be reusable if it + can be freshened by validation (Section 4.3) or if the origin is + unavailable (Section 4.2.4). + +1.1. Conformance and Error Handling + + The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", + "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this + document are to be interpreted as described in [RFC2119]. + + Conformance criteria and considerations regarding error handling are + defined in Section 2.5 of [RFC7230]. + +1.2. Syntax Notation + + This specification uses the Augmented Backus-Naur Form (ABNF) + notation of [RFC5234] with a list extension, defined in Section 7 of + [RFC7230], that allows for compact definition of comma-separated + lists using a '#' operator (similar to how the '*' operator indicates + + + + + +Fielding, et al. Standards Track [Page 4] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + repetition). Appendix B describes rules imported from other + documents. Appendix C shows the collected grammar with all list + operators expanded to standard ABNF notation. + +1.2.1. Delta Seconds + + The delta-seconds rule specifies a non-negative integer, representing + time in seconds. + + delta-seconds = 1*DIGIT + + A recipient parsing a delta-seconds value and converting it to binary + form ought to use an arithmetic type of at least 31 bits of + non-negative integer range. If a cache receives a delta-seconds + value greater than the greatest integer it can represent, or if any + of its subsequent calculations overflows, the cache MUST consider the + value to be either 2147483648 (2^31) or the greatest positive integer + it can conveniently represent. + + Note: The value 2147483648 is here for historical reasons, + effectively represents infinity (over 68 years), and does not need + to be stored in binary form; an implementation could produce it as + a canned string if any overflow occurs, even if the calculations + are performed with an arithmetic type incapable of directly + representing that number. What matters here is that an overflow + be detected and not treated as a negative value in later + calculations. + +2. Overview of Cache Operation + + Proper cache operation preserves the semantics of HTTP transfers + ([RFC7231]) while eliminating the transfer of information already + held in the cache. Although caching is an entirely OPTIONAL feature + of HTTP, it can be assumed that reusing a cached response is + desirable and that such reuse is the default behavior when no + requirement or local configuration prevents it. Therefore, HTTP + cache requirements are focused on preventing a cache from either + storing a non-reusable response or reusing a stored response + inappropriately, rather than mandating that caches always store and + reuse particular responses. + + Each cache entry consists of a cache key and one or more HTTP + responses corresponding to prior requests that used the same key. + The most common form of cache entry is a successful result of a + retrieval request: i.e., a 200 (OK) response to a GET request, which + contains a representation of the resource identified by the request + target (Section 4.3.1 of [RFC7231]). However, it is also possible to + cache permanent redirects, negative results (e.g., 404 (Not Found)), + + + +Fielding, et al. Standards Track [Page 5] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + incomplete results (e.g., 206 (Partial Content)), and responses to + methods other than GET if the method's definition allows such caching + and defines something suitable for use as a cache key. + + The primary cache key consists of the request method and target URI. + However, since HTTP caches in common use today are typically limited + to caching responses to GET, many caches simply decline other methods + and use only the URI as the primary cache key. + + If a request target is subject to content negotiation, its cache + entry might consist of multiple stored responses, each differentiated + by a secondary key for the values of the original request's selecting + header fields (Section 4.1). + +3. Storing Responses in Caches + + A cache MUST NOT store a response to any request, unless: + + o The request method is understood by the cache and defined as being + cacheable, and + + o the response status code is understood by the cache, and + + o the "no-store" cache directive (see Section 5.2) does not appear + in request or response header fields, and + + o the "private" response directive (see Section 5.2.2.6) does not + appear in the response, if the cache is shared, and + + o the Authorization header field (see Section 4.2 of [RFC7235]) does + not appear in the request, if the cache is shared, unless the + response explicitly allows it (see Section 3.2), and + + o the response either: + + * contains an Expires header field (see Section 5.3), or + + * contains a max-age response directive (see Section 5.2.2.8), or + + * contains a s-maxage response directive (see Section 5.2.2.9) + and the cache is shared, or + + * contains a Cache Control Extension (see Section 5.2.3) that + allows it to be cached, or + + * has a status code that is defined as cacheable by default (see + Section 4.2.2), or + + + + +Fielding, et al. Standards Track [Page 6] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + * contains a public response directive (see Section 5.2.2.5). + + Note that any of the requirements listed above can be overridden by a + cache-control extension; see Section 5.2.3. + + In this context, a cache has "understood" a request method or a + response status code if it recognizes it and implements all specified + caching-related behavior. + + Note that, in normal operation, some caches will not store a response + that has neither a cache validator nor an explicit expiration time, + as such responses are not usually useful to store. However, caches + are not prohibited from storing such responses. + +3.1. Storing Incomplete Responses + + A response message is considered complete when all of the octets + indicated by the message framing ([RFC7230]) are received prior to + the connection being closed. If the request method is GET, the + response status code is 200 (OK), and the entire response header + section has been received, a cache MAY store an incomplete response + message body if the cache entry is recorded as incomplete. Likewise, + a 206 (Partial Content) response MAY be stored as if it were an + incomplete 200 (OK) cache entry. However, a cache MUST NOT store + incomplete or partial-content responses if it does not support the + Range and Content-Range header fields or if it does not understand + the range units used in those fields. + + A cache MAY complete a stored incomplete response by making a + subsequent range request ([RFC7233]) and combining the successful + response with the stored entry, as defined in Section 3.3. A cache + MUST NOT use an incomplete response to answer requests unless the + response has been made complete or the request is partial and + specifies a range that is wholly within the incomplete response. A + cache MUST NOT send a partial response to a client without explicitly + marking it as such using the 206 (Partial Content) status code. + +3.2. Storing Responses to Authenticated Requests + + A shared cache MUST NOT use a cached response to a request with an + Authorization header field (Section 4.2 of [RFC7235]) to satisfy any + subsequent request unless a cache directive that allows such + responses to be stored is present in the response. + + In this specification, the following Cache-Control response + directives (Section 5.2.2) have such an effect: must-revalidate, + public, and s-maxage. + + + + +Fielding, et al. Standards Track [Page 7] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + Note that cached responses that contain the "must-revalidate" and/or + "s-maxage" response directives are not allowed to be served stale + (Section 4.2.4) by shared caches. In particular, a response with + either "max-age=0, must-revalidate" or "s-maxage=0" cannot be used to + satisfy a subsequent request without revalidating it on the origin + server. + +3.3. Combining Partial Content + + A response might transfer only a partial representation if the + connection closed prematurely or if the request used one or more + Range specifiers ([RFC7233]). After several such transfers, a cache + might have received several ranges of the same representation. A + cache MAY combine these ranges into a single stored response, and + reuse that response to satisfy later requests, if they all share the + same strong validator and the cache complies with the client + requirements in Section 4.3 of [RFC7233]. + + When combining the new response with one or more stored responses, a + cache MUST: + + o delete any Warning header fields in the stored response with + warn-code 1xx (see Section 5.5); + + o retain any Warning header fields in the stored response with + warn-code 2xx; and, + + o use other header fields provided in the new response, aside from + Content-Range, to replace all instances of the corresponding + header fields in the stored response. + +4. Constructing Responses from Caches + + When presented with a request, a cache MUST NOT reuse a stored + response, unless: + + o The presented effective request URI (Section 5.5 of [RFC7230]) and + that of the stored response match, and + + o the request method associated with the stored response allows it + to be used for the presented request, and + + o selecting header fields nominated by the stored response (if any) + match those presented (see Section 4.1), and + + + + + + + +Fielding, et al. Standards Track [Page 8] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + o the presented request does not contain the no-cache pragma + (Section 5.4), nor the no-cache cache directive (Section 5.2.1), + unless the stored response is successfully validated + (Section 4.3), and + + o the stored response does not contain the no-cache cache directive + (Section 5.2.2.2), unless it is successfully validated + (Section 4.3), and + + o the stored response is either: + + * fresh (see Section 4.2), or + + * allowed to be served stale (see Section 4.2.4), or + + * successfully validated (see Section 4.3). + + Note that any of the requirements listed above can be overridden by a + cache-control extension; see Section 5.2.3. + + When a stored response is used to satisfy a request without + validation, a cache MUST generate an Age header field (Section 5.1), + replacing any present in the response with a value equal to the + stored response's current_age; see Section 4.2.3. + + A cache MUST write through requests with methods that are unsafe + (Section 4.2.1 of [RFC7231]) to the origin server; i.e., a cache is + not allowed to generate a reply to such a request before having + forwarded the request and having received a corresponding response. + + Also, note that unsafe requests might invalidate already-stored + responses; see Section 4.4. + + When more than one suitable response is stored, a cache MUST use the + most recent response (as determined by the Date header field). It + can also forward the request with "Cache-Control: max-age=0" or + "Cache-Control: no-cache" to disambiguate which response to use. + + A cache that does not have a clock available MUST NOT use stored + responses without revalidating them upon every use. + +4.1. Calculating Secondary Keys with Vary + + When a cache receives a request that can be satisfied by a stored + response that has a Vary header field (Section 7.1.4 of [RFC7231]), + it MUST NOT use that response unless all of the selecting header + + + + + +Fielding, et al. Standards Track [Page 9] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + fields nominated by the Vary header field match in both the original + request (i.e., that associated with the stored response), and the + presented request. + + The selecting header fields from two requests are defined to match if + and only if those in the first request can be transformed to those in + the second request by applying any of the following: + + o adding or removing whitespace, where allowed in the header field's + syntax + + o combining multiple header fields with the same field name (see + Section 3.2 of [RFC7230]) + + o normalizing both header field values in a way that is known to + have identical semantics, according to the header field's + specification (e.g., reordering field values when order is not + significant; case-normalization, where values are defined to be + case-insensitive) + + If (after any normalization that might take place) a header field is + absent from a request, it can only match another request if it is + also absent there. + + A Vary header field-value of "*" always fails to match. + + The stored response with matching selecting header fields is known as + the selected response. + + If multiple selected responses are available (potentially including + responses without a Vary header field), the cache will need to choose + one to use. When a selecting header field has a known mechanism for + doing so (e.g., qvalues on Accept and similar request header fields), + that mechanism MAY be used to select preferred responses; of the + remainder, the most recent response (as determined by the Date header + field) is used, as per Section 4. + + If no selected response is available, the cache cannot satisfy the + presented request. Typically, it is forwarded to the origin server + in a (possibly conditional; see Section 4.3) request. + + + + + + + + + + + +Fielding, et al. Standards Track [Page 10] + +RFC 7234 HTTP/1.1 Caching June 2014 + + +4.2. Freshness + + A fresh response is one whose age has not yet exceeded its freshness + lifetime. Conversely, a stale response is one where it has. + + A response's freshness lifetime is the length of time between its + generation by the origin server and its expiration time. An explicit + expiration time is the time at which the origin server intends that a + stored response can no longer be used by a cache without further + validation, whereas a heuristic expiration time is assigned by a + cache when no explicit expiration time is available. + + A response's age is the time that has passed since it was generated + by, or successfully validated with, the origin server. + + When a response is "fresh" in the cache, it can be used to satisfy + subsequent requests without contacting the origin server, thereby + improving efficiency. + + The primary mechanism for determining freshness is for an origin + server to provide an explicit expiration time in the future, using + either the Expires header field (Section 5.3) or the max-age response + directive (Section 5.2.2.8). Generally, origin servers will assign + future explicit expiration times to responses in the belief that the + representation is not likely to change in a semantically significant + way before the expiration time is reached. + + If an origin server wishes to force a cache to validate every + request, it can assign an explicit expiration time in the past to + indicate that the response is already stale. Compliant caches will + normally validate a stale cached response before reusing it for + subsequent requests (see Section 4.2.4). + + Since origin servers do not always provide explicit expiration times, + caches are also allowed to use a heuristic to determine an expiration + time under certain circumstances (see Section 4.2.2). + + The calculation to determine if a response is fresh is: + + response_is_fresh = (freshness_lifetime > current_age) + + freshness_lifetime is defined in Section 4.2.1; current_age is + defined in Section 4.2.3. + + Clients can send the max-age or min-fresh cache directives in a + request to constrain or relax freshness calculations for the + corresponding response (Section 5.2.1). + + + + +Fielding, et al. Standards Track [Page 11] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + When calculating freshness, to avoid common problems in date parsing: + + o Although all date formats are specified to be case-sensitive, a + cache recipient SHOULD match day, week, and time-zone names + case-insensitively. + + o If a cache recipient's internal implementation of time has less + resolution than the value of an HTTP-date, the recipient MUST + internally represent a parsed Expires date as the nearest time + equal to or earlier than the received value. + + o A cache recipient MUST NOT allow local time zones to influence the + calculation or comparison of an age or expiration time. + + o A cache recipient SHOULD consider a date with a zone abbreviation + other than GMT or UTC to be invalid for calculating expiration. + + Note that freshness applies only to cache operation; it cannot be + used to force a user agent to refresh its display or reload a + resource. See Section 6 for an explanation of the difference between + caches and history mechanisms. + +4.2.1. Calculating Freshness Lifetime + + A cache can calculate the freshness lifetime (denoted as + freshness_lifetime) of a response by using the first match of the + following: + + o If the cache is shared and the s-maxage response directive + (Section 5.2.2.9) is present, use its value, or + + o If the max-age response directive (Section 5.2.2.8) is present, + use its value, or + + o If the Expires response header field (Section 5.3) is present, use + its value minus the value of the Date response header field, or + + o Otherwise, no explicit expiration time is present in the response. + A heuristic freshness lifetime might be applicable; see + Section 4.2.2. + + Note that this calculation is not vulnerable to clock skew, since all + of the information comes from the origin server. + + + + + + + + +Fielding, et al. Standards Track [Page 12] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + When there is more than one value present for a given directive + (e.g., two Expires header fields, multiple Cache-Control: max-age + directives), the directive's value is considered invalid. Caches are + encouraged to consider responses that have invalid freshness + information to be stale. + +4.2.2. Calculating Heuristic Freshness + + Since origin servers do not always provide explicit expiration times, + a cache MAY assign a heuristic expiration time when an explicit time + is not specified, employing algorithms that use other header field + values (such as the Last-Modified time) to estimate a plausible + expiration time. This specification does not provide specific + algorithms, but does impose worst-case constraints on their results. + + A cache MUST NOT use heuristics to determine freshness when an + explicit expiration time is present in the stored response. Because + of the requirements in Section 3, this means that, effectively, + heuristics can only be used on responses without explicit freshness + whose status codes are defined as cacheable by default (see Section + 6.1 of [RFC7231]), and those responses without explicit freshness + that have been marked as explicitly cacheable (e.g., with a "public" + response directive). + + If the response has a Last-Modified header field (Section 2.2 of + [RFC7232]), caches are encouraged to use a heuristic expiration value + that is no more than some fraction of the interval since that time. + A typical setting of this fraction might be 10%. + + When a heuristic is used to calculate freshness lifetime, a cache + SHOULD generate a Warning header field with a 113 warn-code (see + Section 5.5.4) in the response if its current_age is more than 24 + hours and such a warning is not already present. + + Note: Section 13.9 of [RFC2616] prohibited caches from calculating + heuristic freshness for URIs with query components (i.e., those + containing '?'). In practice, this has not been widely + implemented. Therefore, origin servers are encouraged to send + explicit directives (e.g., Cache-Control: no-cache) if they wish + to preclude caching. + +4.2.3. Calculating Age + + The Age header field is used to convey an estimated age of the + response message when obtained from a cache. The Age field value is + the cache's estimate of the number of seconds since the response was + generated or validated by the origin server. In essence, the Age + + + + +Fielding, et al. Standards Track [Page 13] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + value is the sum of the time that the response has been resident in + each of the caches along the path from the origin server, plus the + amount of time it has been in transit along network paths. + + The following data is used for the age calculation: + + age_value + + The term "age_value" denotes the value of the Age header field + (Section 5.1), in a form appropriate for arithmetic operation; or + 0, if not available. + + date_value + + The term "date_value" denotes the value of the Date header field, + in a form appropriate for arithmetic operations. See Section + 7.1.1.2 of [RFC7231] for the definition of the Date header field, + and for requirements regarding responses without it. + + now + + The term "now" means "the current value of the clock at the host + performing the calculation". A host ought to use NTP ([RFC5905]) + or some similar protocol to synchronize its clocks to Coordinated + Universal Time. + + request_time + + The current value of the clock at the host at the time the request + resulting in the stored response was made. + + response_time + + The current value of the clock at the host at the time the + response was received. + + A response's age can be calculated in two entirely independent ways: + + 1. the "apparent_age": response_time minus date_value, if the local + clock is reasonably well synchronized to the origin server's + clock. If the result is negative, the result is replaced by + zero. + + 2. the "corrected_age_value", if all of the caches along the + response path implement HTTP/1.1. A cache MUST interpret this + value relative to the time the request was initiated, not the + time that the response was received. + + + + +Fielding, et al. Standards Track [Page 14] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + apparent_age = max(0, response_time - date_value); + + response_delay = response_time - request_time; + corrected_age_value = age_value + response_delay; + + These are combined as + + corrected_initial_age = max(apparent_age, corrected_age_value); + + unless the cache is confident in the value of the Age header field + (e.g., because there are no HTTP/1.0 hops in the Via header field), + in which case the corrected_age_value MAY be used as the + corrected_initial_age. + + The current_age of a stored response can then be calculated by adding + the amount of time (in seconds) since the stored response was last + validated by the origin server to the corrected_initial_age. + + resident_time = now - response_time; + current_age = corrected_initial_age + resident_time; + +4.2.4. Serving Stale Responses + + A "stale" response is one that either has explicit expiry information + or is allowed to have heuristic expiry calculated, but is not fresh + according to the calculations in Section 4.2. + + A cache MUST NOT generate a stale response if it is prohibited by an + explicit in-protocol directive (e.g., by a "no-store" or "no-cache" + cache directive, a "must-revalidate" cache-response-directive, or an + applicable "s-maxage" or "proxy-revalidate" cache-response-directive; + see Section 5.2.2). + + A cache MUST NOT send stale responses unless it is disconnected + (i.e., it cannot contact the origin server or otherwise find a + forward path) or doing so is explicitly allowed (e.g., by the + max-stale request directive; see Section 5.2.1). + + A cache SHOULD generate a Warning header field with the 110 warn-code + (see Section 5.5.1) in stale responses. Likewise, a cache SHOULD + generate a 112 warn-code (see Section 5.5.3) in stale responses if + the cache is disconnected. + + A cache SHOULD NOT generate a new Warning header field when + forwarding a response that does not have an Age header field, even if + the response is already stale. A cache need not validate a response + that merely became stale in transit. + + + + +Fielding, et al. Standards Track [Page 15] + +RFC 7234 HTTP/1.1 Caching June 2014 + + +4.3. Validation + + When a cache has one or more stored responses for a requested URI, + but cannot serve any of them (e.g., because they are not fresh, or + one cannot be selected; see Section 4.1), it can use the conditional + request mechanism [RFC7232] in the forwarded request to give the next + inbound server an opportunity to select a valid stored response to + use, updating the stored metadata in the process, or to replace the + stored response(s) with a new response. This process is known as + "validating" or "revalidating" the stored response. + +4.3.1. Sending a Validation Request + + When sending a conditional request for cache validation, a cache + sends one or more precondition header fields containing validator + metadata from its stored response(s), which is then compared by + recipients to determine whether a stored response is equivalent to a + current representation of the resource. + + One such validator is the timestamp given in a Last-Modified header + field (Section 2.2 of [RFC7232]), which can be used in an + If-Modified-Since header field for response validation, or in an + If-Unmodified-Since or If-Range header field for representation + selection (i.e., the client is referring specifically to a previously + obtained representation with that timestamp). + + Another validator is the entity-tag given in an ETag header field + (Section 2.3 of [RFC7232]). One or more entity-tags, indicating one + or more stored responses, can be used in an If-None-Match header + field for response validation, or in an If-Match or If-Range header + field for representation selection (i.e., the client is referring + specifically to one or more previously obtained representations with + the listed entity-tags). + +4.3.2. Handling a Received Validation Request + + Each client in the request chain may have its own cache, so it is + common for a cache at an intermediary to receive conditional requests + from other (outbound) caches. Likewise, some user agents make use of + conditional requests to limit data transfers to recently modified + representations or to complete the transfer of a partially retrieved + representation. + + If a cache receives a request that can be satisfied by reusing one of + its stored 200 (OK) or 206 (Partial Content) responses, the cache + SHOULD evaluate any applicable conditional header field preconditions + received in that request with respect to the corresponding validators + contained within the selected response. A cache MUST NOT evaluate + + + +Fielding, et al. Standards Track [Page 16] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + conditional header fields that are only applicable to an origin + server, found in a request with semantics that cannot be satisfied + with a cached response, or applied to a target resource for which it + has no stored responses; such preconditions are likely intended for + some other (inbound) server. + + The proper evaluation of conditional requests by a cache depends on + the received precondition header fields and their precedence, as + defined in Section 6 of [RFC7232]. The If-Match and + If-Unmodified-Since conditional header fields are not applicable to a + cache. + + A request containing an If-None-Match header field (Section 3.2 of + [RFC7232]) indicates that the client wants to validate one or more of + its own stored responses in comparison to whichever stored response + is selected by the cache. If the field-value is "*", or if the + field-value is a list of entity-tags and at least one of them matches + the entity-tag of the selected stored response, a cache recipient + SHOULD generate a 304 (Not Modified) response (using the metadata of + the selected stored response) instead of sending that stored + response. + + When a cache decides to revalidate its own stored responses for a + request that contains an If-None-Match list of entity-tags, the cache + MAY combine the received list with a list of entity-tags from its own + stored set of responses (fresh or stale) and send the union of the + two lists as a replacement If-None-Match header field value in the + forwarded request. If a stored response contains only partial + content, the cache MUST NOT include its entity-tag in the union + unless the request is for a range that would be fully satisfied by + that partial stored response. If the response to the forwarded + request is 304 (Not Modified) and has an ETag header field value with + an entity-tag that is not in the client's list, the cache MUST + generate a 200 (OK) response for the client by reusing its + corresponding stored response, as updated by the 304 response + metadata (Section 4.3.4). + + If an If-None-Match header field is not present, a request containing + an If-Modified-Since header field (Section 3.3 of [RFC7232]) + indicates that the client wants to validate one or more of its own + stored responses by modification date. A cache recipient SHOULD + generate a 304 (Not Modified) response (using the metadata of the + selected stored response) if one of the following cases is true: 1) + the selected stored response has a Last-Modified field-value that is + earlier than or equal to the conditional timestamp; 2) no + Last-Modified field is present in the selected stored response, but + it has a Date field-value that is earlier than or equal to the + conditional timestamp; or, 3) neither Last-Modified nor Date is + + + +Fielding, et al. Standards Track [Page 17] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + present in the selected stored response, but the cache recorded it as + having been received at a time earlier than or equal to the + conditional timestamp. + + A cache that implements partial responses to range requests, as + defined in [RFC7233], also needs to evaluate a received If-Range + header field (Section 3.2 of [RFC7233]) with respect to its selected + stored response. + +4.3.3. Handling a Validation Response + + Cache handling of a response to a conditional request is dependent + upon its status code: + + o A 304 (Not Modified) response status code indicates that the + stored response can be updated and reused; see Section 4.3.4. + + o A full response (i.e., one with a payload body) indicates that + none of the stored responses nominated in the conditional request + is suitable. Instead, the cache MUST use the full response to + satisfy the request and MAY replace the stored response(s). + + o However, if a cache receives a 5xx (Server Error) response while + attempting to validate a response, it can either forward this + response to the requesting client, or act as if the server failed + to respond. In the latter case, the cache MAY send a previously + stored response (see Section 4.2.4). + +4.3.4. Freshening Stored Responses upon Validation + + When a cache receives a 304 (Not Modified) response and already has + one or more stored 200 (OK) responses for the same cache key, the + cache needs to identify which of the stored responses are updated by + this new response and then update the stored response(s) with the new + information provided in the 304 response. + + The stored response to update is identified by using the first match + (if any) of the following: + + o If the new response contains a strong validator (see Section 2.1 + of [RFC7232]), then that strong validator identifies the selected + representation for update. All of the stored responses with the + same strong validator are selected. If none of the stored + responses contain the same strong validator, then the cache MUST + NOT use the new response to update any stored responses. + + + + + + +Fielding, et al. Standards Track [Page 18] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + o If the new response contains a weak validator and that validator + corresponds to one of the cache's stored responses, then the most + recent of those matching stored responses is selected for update. + + o If the new response does not include any form of validator (such + as in the case where a client generates an If-Modified-Since + request from a source other than the Last-Modified response header + field), and there is only one stored response, and that stored + response also lacks a validator, then that stored response is + selected for update. + + If a stored response is selected for update, the cache MUST: + + o delete any Warning header fields in the stored response with + warn-code 1xx (see Section 5.5); + + o retain any Warning header fields in the stored response with + warn-code 2xx; and, + + o use other header fields provided in the 304 (Not Modified) + response to replace all instances of the corresponding header + fields in the stored response. + +4.3.5. Freshening Responses via HEAD + + A response to the HEAD method is identical to what an equivalent + request made with a GET would have been, except it lacks a body. + This property of HEAD responses can be used to invalidate or update a + cached GET response if the more efficient conditional GET request + mechanism is not available (due to no validators being present in the + stored response) or if transmission of the representation body is not + desired even if it has changed. + + When a cache makes an inbound HEAD request for a given request target + and receives a 200 (OK) response, the cache SHOULD update or + invalidate each of its stored GET responses that could have been + selected for that request (see Section 4.1). + + For each of the stored responses that could have been selected, if + the stored response and HEAD response have matching values for any + received validator fields (ETag and Last-Modified) and, if the HEAD + response has a Content-Length header field, the value of + Content-Length matches that of the stored response, the cache SHOULD + update the stored response as described below; otherwise, the cache + SHOULD consider the stored response to be stale. + + + + + + +Fielding, et al. Standards Track [Page 19] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + If a cache updates a stored response with the metadata provided in a + HEAD response, the cache MUST: + + o delete any Warning header fields in the stored response with + warn-code 1xx (see Section 5.5); + + o retain any Warning header fields in the stored response with + warn-code 2xx; and, + + o use other header fields provided in the HEAD response to replace + all instances of the corresponding header fields in the stored + response and append new header fields to the stored response's + header section unless otherwise restricted by the Cache-Control + header field. + +4.4. Invalidation + + Because unsafe request methods (Section 4.2.1 of [RFC7231]) such as + PUT, POST or DELETE have the potential for changing state on the + origin server, intervening caches can use them to keep their contents + up to date. + + A cache MUST invalidate the effective Request URI (Section 5.5 of + [RFC7230]) as well as the URI(s) in the Location and Content-Location + response header fields (if present) when a non-error status code is + received in response to an unsafe request method. + + However, a cache MUST NOT invalidate a URI from a Location or + Content-Location response header field if the host part of that URI + differs from the host part in the effective request URI (Section 5.5 + of [RFC7230]). This helps prevent denial-of-service attacks. + + A cache MUST invalidate the effective request URI (Section 5.5 of + [RFC7230]) when it receives a non-error response to a request with a + method whose safety is unknown. + + Here, a "non-error response" is one with a 2xx (Successful) or 3xx + (Redirection) status code. "Invalidate" means that the cache will + either remove all stored responses related to the effective request + URI or will mark these as "invalid" and in need of a mandatory + validation before they can be sent in response to a subsequent + request. + + Note that this does not guarantee that all appropriate responses are + invalidated. For example, a state-changing request might invalidate + responses in the caches it travels through, but relevant responses + still might be stored in other caches that it has not. + + + + +Fielding, et al. Standards Track [Page 20] + +RFC 7234 HTTP/1.1 Caching June 2014 + + +5. Header Field Definitions + + This section defines the syntax and semantics of HTTP/1.1 header + fields related to caching. + +5.1. Age + + The "Age" header field conveys the sender's estimate of the amount of + time since the response was generated or successfully validated at + the origin server. Age values are calculated as specified in + Section 4.2.3. + + Age = delta-seconds + + The Age field-value is a non-negative integer, representing time in + seconds (see Section 1.2.1). + + The presence of an Age header field implies that the response was not + generated or validated by the origin server for this request. + However, lack of an Age header field does not imply the origin was + contacted, since the response might have been received from an + HTTP/1.0 cache that does not implement Age. + +5.2. Cache-Control + + The "Cache-Control" header field is used to specify directives for + caches along the request/response chain. Such cache directives are + unidirectional in that the presence of a directive in a request does + not imply that the same directive is to be given in the response. + + A cache MUST obey the requirements of the Cache-Control directives + defined in this section. See Section 5.2.3 for information about how + Cache-Control directives defined elsewhere are handled. + + Note: Some HTTP/1.0 caches might not implement Cache-Control. + + A proxy, whether or not it implements a cache, MUST pass cache + directives through in forwarded messages, regardless of their + significance to that application, since the directives might be + applicable to all recipients along the request/response chain. It is + not possible to target a directive to a specific cache. + + Cache directives are identified by a token, to be compared + case-insensitively, and have an optional argument, that can use both + token and quoted-string syntax. For the directives defined below + that define arguments, recipients ought to accept both forms, even if + one is documented to be preferred. For any directive not defined by + this specification, a recipient MUST accept both forms. + + + +Fielding, et al. Standards Track [Page 21] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + Cache-Control = 1#cache-directive + + cache-directive = token [ "=" ( token / quoted-string ) ] + + For the cache directives defined below, no argument is defined (nor + allowed) unless stated otherwise. + +5.2.1. Request Cache-Control Directives + +5.2.1.1. max-age + + Argument syntax: + + delta-seconds (see Section 1.2.1) + + The "max-age" request directive indicates that the client is + unwilling to accept a response whose age is greater than the + specified number of seconds. Unless the max-stale request directive + is also present, the client is not willing to accept a stale + response. + + This directive uses the token form of the argument syntax: e.g., + 'max-age=5' not 'max-age="5"'. A sender SHOULD NOT generate the + quoted-string form. + +5.2.1.2. max-stale + + Argument syntax: + + delta-seconds (see Section 1.2.1) + + The "max-stale" request directive indicates that the client is + willing to accept a response that has exceeded its freshness + lifetime. If max-stale is assigned a value, then the client is + willing to accept a response that has exceeded its freshness lifetime + by no more than the specified number of seconds. If no value is + assigned to max-stale, then the client is willing to accept a stale + response of any age. + + This directive uses the token form of the argument syntax: e.g., + 'max-stale=10' not 'max-stale="10"'. A sender SHOULD NOT generate + the quoted-string form. + +5.2.1.3. min-fresh + + Argument syntax: + + delta-seconds (see Section 1.2.1) + + + +Fielding, et al. Standards Track [Page 22] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + The "min-fresh" request directive indicates that the client is + willing to accept a response whose freshness lifetime is no less than + its current age plus the specified time in seconds. That is, the + client wants a response that will still be fresh for at least the + specified number of seconds. + + This directive uses the token form of the argument syntax: e.g., + 'min-fresh=20' not 'min-fresh="20"'. A sender SHOULD NOT generate + the quoted-string form. + +5.2.1.4. no-cache + + The "no-cache" request directive indicates that a cache MUST NOT use + a stored response to satisfy the request without successful + validation on the origin server. + +5.2.1.5. no-store + + The "no-store" request directive indicates that a cache MUST NOT + store any part of either this request or any response to it. This + directive applies to both private and shared caches. "MUST NOT + store" in this context means that the cache MUST NOT intentionally + store the information in non-volatile storage, and MUST make a + best-effort attempt to remove the information from volatile storage + as promptly as possible after forwarding it. + + This directive is NOT a reliable or sufficient mechanism for ensuring + privacy. In particular, malicious or compromised caches might not + recognize or obey this directive, and communications networks might + be vulnerable to eavesdropping. + + Note that if a request containing this directive is satisfied from a + cache, the no-store request directive does not apply to the already + stored response. + +5.2.1.6. no-transform + + The "no-transform" request directive indicates that an intermediary + (whether or not it implements a cache) MUST NOT transform the + payload, as defined in Section 5.7.2 of [RFC7230]. + +5.2.1.7. only-if-cached + + The "only-if-cached" request directive indicates that the client only + wishes to obtain a stored response. If it receives this directive, a + cache SHOULD either respond using a stored response that is + consistent with the other constraints of the request, or respond with + + + + +Fielding, et al. Standards Track [Page 23] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + a 504 (Gateway Timeout) status code. If a group of caches is being + operated as a unified system with good internal connectivity, a + member cache MAY forward such a request within that group of caches. + +5.2.2. Response Cache-Control Directives + +5.2.2.1. must-revalidate + + The "must-revalidate" response directive indicates that once it has + become stale, a cache MUST NOT use the response to satisfy subsequent + requests without successful validation on the origin server. + + The must-revalidate directive is necessary to support reliable + operation for certain protocol features. In all circumstances a + cache MUST obey the must-revalidate directive; in particular, if a + cache cannot reach the origin server for any reason, it MUST generate + a 504 (Gateway Timeout) response. + + The must-revalidate directive ought to be used by servers if and only + if failure to validate a request on the representation could result + in incorrect operation, such as a silently unexecuted financial + transaction. + +5.2.2.2. no-cache + + Argument syntax: + + #field-name + + The "no-cache" response directive indicates that the response MUST + NOT be used to satisfy a subsequent request without successful + validation on the origin server. This allows an origin server to + prevent a cache from using it to satisfy a request without contacting + it, even by caches that have been configured to send stale responses. + + If the no-cache response directive specifies one or more field-names, + then a cache MAY use the response to satisfy a subsequent request, + subject to any other restrictions on caching. However, any header + fields in the response that have the field-name(s) listed MUST NOT be + sent in the response to a subsequent request without successful + revalidation with the origin server. This allows an origin server to + prevent the re-use of certain header fields in a response, while + still allowing caching of the rest of the response. + + The field-names given are not limited to the set of header fields + defined by this specification. Field names are case-insensitive. + + + + + +Fielding, et al. Standards Track [Page 24] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + This directive uses the quoted-string form of the argument syntax. A + sender SHOULD NOT generate the token form (even if quoting appears + not to be needed for single-entry lists). + + Note: Although it has been back-ported to many implementations, some + HTTP/1.0 caches will not recognize or obey this directive. Also, + no-cache response directives with field-names are often handled by + caches as if an unqualified no-cache directive was received; i.e., + the special handling for the qualified form is not widely + implemented. + +5.2.2.3. no-store + + The "no-store" response directive indicates that a cache MUST NOT + store any part of either the immediate request or response. This + directive applies to both private and shared caches. "MUST NOT + store" in this context means that the cache MUST NOT intentionally + store the information in non-volatile storage, and MUST make a + best-effort attempt to remove the information from volatile storage + as promptly as possible after forwarding it. + + This directive is NOT a reliable or sufficient mechanism for ensuring + privacy. In particular, malicious or compromised caches might not + recognize or obey this directive, and communications networks might + be vulnerable to eavesdropping. + +5.2.2.4. no-transform + + The "no-transform" response directive indicates that an intermediary + (regardless of whether it implements a cache) MUST NOT transform the + payload, as defined in Section 5.7.2 of [RFC7230]. + +5.2.2.5. public + + The "public" response directive indicates that any cache MAY store + the response, even if the response would normally be non-cacheable or + cacheable only within a private cache. (See Section 3.2 for + additional details related to the use of public in response to a + request containing Authorization, and Section 3 for details of how + public affects responses that would normally not be stored, due to + their status codes not being defined as cacheable by default; see + Section 4.2.2.) + +5.2.2.6. private + + Argument syntax: + + #field-name + + + +Fielding, et al. Standards Track [Page 25] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + The "private" response directive indicates that the response message + is intended for a single user and MUST NOT be stored by a shared + cache. A private cache MAY store the response and reuse it for later + requests, even if the response would normally be non-cacheable. + + If the private response directive specifies one or more field-names, + this requirement is limited to the field-values associated with the + listed response header fields. That is, a shared cache MUST NOT + store the specified field-names(s), whereas it MAY store the + remainder of the response message. + + The field-names given are not limited to the set of header fields + defined by this specification. Field names are case-insensitive. + + This directive uses the quoted-string form of the argument syntax. A + sender SHOULD NOT generate the token form (even if quoting appears + not to be needed for single-entry lists). + + Note: This usage of the word "private" only controls where the + response can be stored; it cannot ensure the privacy of the message + content. Also, private response directives with field-names are + often handled by caches as if an unqualified private directive was + received; i.e., the special handling for the qualified form is not + widely implemented. + +5.2.2.7. proxy-revalidate + + The "proxy-revalidate" response directive has the same meaning as the + must-revalidate response directive, except that it does not apply to + private caches. + +5.2.2.8. max-age + + Argument syntax: + + delta-seconds (see Section 1.2.1) + + The "max-age" response directive indicates that the response is to be + considered stale after its age is greater than the specified number + of seconds. + + This directive uses the token form of the argument syntax: e.g., + 'max-age=5' not 'max-age="5"'. A sender SHOULD NOT generate the + quoted-string form. + + + + + + + +Fielding, et al. Standards Track [Page 26] + +RFC 7234 HTTP/1.1 Caching June 2014 + + +5.2.2.9. s-maxage + + Argument syntax: + + delta-seconds (see Section 1.2.1) + + The "s-maxage" response directive indicates that, in shared caches, + the maximum age specified by this directive overrides the maximum age + specified by either the max-age directive or the Expires header + field. The s-maxage directive also implies the semantics of the + proxy-revalidate response directive. + + This directive uses the token form of the argument syntax: e.g., + 's-maxage=10' not 's-maxage="10"'. A sender SHOULD NOT generate the + quoted-string form. + +5.2.3. Cache Control Extensions + + The Cache-Control header field can be extended through the use of one + or more cache-extension tokens, each with an optional value. A cache + MUST ignore unrecognized cache directives. + + Informational extensions (those that do not require a change in cache + behavior) can be added without changing the semantics of other + directives. + + Behavioral extensions are designed to work by acting as modifiers to + the existing base of cache directives. Both the new directive and + the old directive are supplied, such that applications that do not + understand the new directive will default to the behavior specified + by the old directive, and those that understand the new directive + will recognize it as modifying the requirements associated with the + old directive. In this way, extensions to the existing cache-control + directives can be made without breaking deployed caches. + + For example, consider a hypothetical new response directive called + "community" that acts as a modifier to the private directive: in + addition to private caches, any cache that is shared only by members + of the named community is allowed to cache the response. An origin + server wishing to allow the UCI community to use an otherwise private + response in their shared cache(s) could do so by including + + Cache-Control: private, community="UCI" + + A cache that recognizes such a community cache-extension could + broaden its behavior in accordance with that extension. A cache that + does not recognize the community cache-extension would ignore it and + adhere to the private directive. + + + +Fielding, et al. Standards Track [Page 27] + +RFC 7234 HTTP/1.1 Caching June 2014 + + +5.3. Expires + + The "Expires" header field gives the date/time after which the + response is considered stale. See Section 4.2 for further discussion + of the freshness model. + + The presence of an Expires field does not imply that the original + resource will change or cease to exist at, before, or after that + time. + + The Expires value is an HTTP-date timestamp, as defined in Section + 7.1.1.1 of [RFC7231]. + + Expires = HTTP-date + + For example + + Expires: Thu, 01 Dec 1994 16:00:00 GMT + + A cache recipient MUST interpret invalid date formats, especially the + value "0", as representing a time in the past (i.e., "already + expired"). + + If a response includes a Cache-Control field with the max-age + directive (Section 5.2.2.8), a recipient MUST ignore the Expires + field. Likewise, if a response includes the s-maxage directive + (Section 5.2.2.9), a shared cache recipient MUST ignore the Expires + field. In both these cases, the value in Expires is only intended + for recipients that have not yet implemented the Cache-Control field. + + An origin server without a clock MUST NOT generate an Expires field + unless its value represents a fixed time in the past (always expired) + or its value has been associated with the resource by a system or + user with a reliable clock. + + Historically, HTTP required the Expires field-value to be no more + than a year in the future. While longer freshness lifetimes are no + longer prohibited, extremely large values have been demonstrated to + cause problems (e.g., clock overflows due to use of 32-bit integers + for time values), and many caches will evict a response far sooner + than that. + + + + + + + + + + +Fielding, et al. Standards Track [Page 28] + +RFC 7234 HTTP/1.1 Caching June 2014 + + +5.4. Pragma + + The "Pragma" header field allows backwards compatibility with + HTTP/1.0 caches, so that clients can specify a "no-cache" request + that they will understand (as Cache-Control was not defined until + HTTP/1.1). When the Cache-Control header field is also present and + understood in a request, Pragma is ignored. + + In HTTP/1.0, Pragma was defined as an extensible field for + implementation-specified directives for recipients. This + specification deprecates such extensions to improve interoperability. + + Pragma = 1#pragma-directive + pragma-directive = "no-cache" / extension-pragma + extension-pragma = token [ "=" ( token / quoted-string ) ] + + When the Cache-Control header field is not present in a request, + caches MUST consider the no-cache request pragma-directive as having + the same effect as if "Cache-Control: no-cache" were present (see + Section 5.2.1). + + When sending a no-cache request, a client ought to include both the + pragma and cache-control directives, unless Cache-Control: no-cache + is purposefully omitted to target other Cache-Control response + directives at HTTP/1.1 caches. For example: + + GET / HTTP/1.1 + Host: www.example.com + Cache-Control: max-age=30 + Pragma: no-cache + + will constrain HTTP/1.1 caches to serve a response no older than 30 + seconds, while precluding implementations that do not understand + Cache-Control from serving a cached response. + + Note: Because the meaning of "Pragma: no-cache" in responses is + not specified, it does not provide a reliable replacement for + "Cache-Control: no-cache" in them. + +5.5. Warning + + The "Warning" header field is used to carry additional information + about the status or transformation of a message that might not be + reflected in the status code. This information is typically used to + warn about possible incorrectness introduced by caching operations or + transformations applied to the payload of the message. + + + + + +Fielding, et al. Standards Track [Page 29] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + Warnings can be used for other purposes, both cache-related and + otherwise. The use of a warning, rather than an error status code, + distinguishes these responses from true failures. + + Warning header fields can in general be applied to any message, + however some warn-codes are specific to caches and can only be + applied to response messages. + + Warning = 1#warning-value + + warning-value = warn-code SP warn-agent SP warn-text + [ SP warn-date ] + + warn-code = 3DIGIT + warn-agent = ( uri-host [ ":" port ] ) / pseudonym + ; the name or pseudonym of the server adding + ; the Warning header field, for use in debugging + ; a single "-" is recommended when agent unknown + warn-text = quoted-string + warn-date = DQUOTE HTTP-date DQUOTE + + Multiple warnings can be generated in a response (either by the + origin server or by a cache), including multiple warnings with the + same warn-code number that only differ in warn-text. + + A user agent that receives one or more Warning header fields SHOULD + inform the user of as many of them as possible, in the order that + they appear in the response. Senders that generate multiple Warning + header fields are encouraged to order them with this user agent + behavior in mind. A sender that generates new Warning header fields + MUST append them after any existing Warning header fields. + + Warnings are assigned three digit warn-codes. The first digit + indicates whether the Warning is required to be deleted from a stored + response after validation: + + o 1xx warn-codes describe the freshness or validation status of the + response, and so they MUST be deleted by a cache after validation. + They can only be generated by a cache when validating a cached + entry, and MUST NOT be generated in any other situation. + + o 2xx warn-codes describe some aspect of the representation that is + not rectified by a validation (for example, a lossy compression of + the representation) and they MUST NOT be deleted by a cache after + validation, unless a full response is sent, in which case they + MUST be. + + + + + +Fielding, et al. Standards Track [Page 30] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + If a sender generates one or more 1xx warn-codes in a message to be + sent to a recipient known to implement only HTTP/1.0, the sender MUST + include in each corresponding warning-value a warn-date that matches + the Date header field in the message. For example: + + HTTP/1.1 200 OK + Date: Sat, 25 Aug 2012 23:34:45 GMT + Warning: 112 - "network down" "Sat, 25 Aug 2012 23:34:45 GMT" + + + Warnings have accompanying warn-text that describes the error, e.g., + for logging. It is advisory only, and its content does not affect + interpretation of the warn-code. + + If a recipient that uses, evaluates, or displays Warning header + fields receives a warn-date that is different from the Date value in + the same message, the recipient MUST exclude the warning-value + containing that warn-date before storing, forwarding, or using the + message. This allows recipients to exclude warning-values that were + improperly retained after a cache validation. If all of the + warning-values are excluded, the recipient MUST exclude the Warning + header field as well. + + The following warn-codes are defined by this specification, each with + a recommended warn-text in English, and a description of its meaning. + The procedure for defining additional warn codes is described in + Section 7.2.1. + +5.5.1. Warning: 110 - "Response is Stale" + + A cache SHOULD generate this whenever the sent response is stale. + +5.5.2. Warning: 111 - "Revalidation Failed" + + A cache SHOULD generate this when sending a stale response because an + attempt to validate the response failed, due to an inability to reach + the server. + +5.5.3. Warning: 112 - "Disconnected Operation" + + A cache SHOULD generate this if it is intentionally disconnected from + the rest of the network for a period of time. + +5.5.4. Warning: 113 - "Heuristic Expiration" + + A cache SHOULD generate this if it heuristically chose a freshness + lifetime greater than 24 hours and the response's age is greater than + 24 hours. + + + +Fielding, et al. Standards Track [Page 31] + +RFC 7234 HTTP/1.1 Caching June 2014 + + +5.5.5. Warning: 199 - "Miscellaneous Warning" + + The warning text can include arbitrary information to be presented to + a human user or logged. A system receiving this warning MUST NOT + take any automated action, besides presenting the warning to the + user. + +5.5.6. Warning: 214 - "Transformation Applied" + + This Warning code MUST be added by a proxy if it applies any + transformation to the representation, such as changing the + content-coding, media-type, or modifying the representation data, + unless this Warning code already appears in the response. + +5.5.7. Warning: 299 - "Miscellaneous Persistent Warning" + + The warning text can include arbitrary information to be presented to + a human user or logged. A system receiving this warning MUST NOT + take any automated action. + +6. History Lists + + User agents often have history mechanisms, such as "Back" buttons and + history lists, that can be used to redisplay a representation + retrieved earlier in a session. + + The freshness model (Section 4.2) does not necessarily apply to + history mechanisms. That is, a history mechanism can display a + previous representation even if it has expired. + + This does not prohibit the history mechanism from telling the user + that a view might be stale or from honoring cache directives (e.g., + Cache-Control: no-store). + +7. IANA Considerations + +7.1. Cache Directive Registry + + The "Hypertext Transfer Protocol (HTTP) Cache Directive Registry" + defines the namespace for the cache directives. It has been created + and is now maintained at + . + +7.1.1. Procedure + + A registration MUST include the following fields: + + o Cache Directive Name + + + +Fielding, et al. Standards Track [Page 32] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + o Pointer to specification text + + Values to be added to this namespace require IETF Review (see + [RFC5226], Section 4.1). + +7.1.2. Considerations for New Cache Control Directives + + New extension directives ought to consider defining: + + o What it means for a directive to be specified multiple times, + + o When the directive does not take an argument, what it means when + an argument is present, + + o When the directive requires an argument, what it means when it is + missing, + + o Whether the directive is specific to requests, responses, or able + to be used in either. + + See also Section 5.2.3. + +7.1.3. Registrations + + The registry has been populated with the registrations below: + + +------------------------+----------------------------------+ + | Cache Directive | Reference | + +------------------------+----------------------------------+ + | max-age | Section 5.2.1.1, Section 5.2.2.8 | + | max-stale | Section 5.2.1.2 | + | min-fresh | Section 5.2.1.3 | + | must-revalidate | Section 5.2.2.1 | + | no-cache | Section 5.2.1.4, Section 5.2.2.2 | + | no-store | Section 5.2.1.5, Section 5.2.2.3 | + | no-transform | Section 5.2.1.6, Section 5.2.2.4 | + | only-if-cached | Section 5.2.1.7 | + | private | Section 5.2.2.6 | + | proxy-revalidate | Section 5.2.2.7 | + | public | Section 5.2.2.5 | + | s-maxage | Section 5.2.2.9 | + | stale-if-error | [RFC5861], Section 4 | + | stale-while-revalidate | [RFC5861], Section 3 | + +------------------------+----------------------------------+ + + + + + + + +Fielding, et al. Standards Track [Page 33] + +RFC 7234 HTTP/1.1 Caching June 2014 + + +7.2. Warn Code Registry + + The "Hypertext Transfer Protocol (HTTP) Warn Codes" registry defines + the namespace for warn codes. It has been created and is now + maintained at . + +7.2.1. Procedure + + A registration MUST include the following fields: + + o Warn Code (3 digits) + + o Short Description + + o Pointer to specification text + + Values to be added to this namespace require IETF Review (see + [RFC5226], Section 4.1). + +7.2.2. Registrations + + The registry has been populated with the registrations below: + + +-----------+----------------------------------+---------------+ + | Warn Code | Short Description | Reference | + +-----------+----------------------------------+---------------+ + | 110 | Response is Stale | Section 5.5.1 | + | 111 | Revalidation Failed | Section 5.5.2 | + | 112 | Disconnected Operation | Section 5.5.3 | + | 113 | Heuristic Expiration | Section 5.5.4 | + | 199 | Miscellaneous Warning | Section 5.5.5 | + | 214 | Transformation Applied | Section 5.5.6 | + | 299 | Miscellaneous Persistent Warning | Section 5.5.7 | + +-----------+----------------------------------+---------------+ + +7.3. Header Field Registration + + HTTP header fields are registered within the "Message Headers" + registry maintained at + . + + + + + + + + + + + +Fielding, et al. Standards Track [Page 34] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + This document defines the following HTTP header fields, so the + "Permanent Message Header Field Names" registry has been updated + accordingly (see [BCP90]). + + +-------------------+----------+----------+-------------+ + | Header Field Name | Protocol | Status | Reference | + +-------------------+----------+----------+-------------+ + | Age | http | standard | Section 5.1 | + | Cache-Control | http | standard | Section 5.2 | + | Expires | http | standard | Section 5.3 | + | Pragma | http | standard | Section 5.4 | + | Warning | http | standard | Section 5.5 | + +-------------------+----------+----------+-------------+ + + The change controller is: "IETF (iesg@ietf.org) - Internet + Engineering Task Force". + +8. Security Considerations + + This section is meant to inform developers, information providers, + and users of known security concerns specific to HTTP caching. More + general security considerations are addressed in HTTP messaging + [RFC7230] and semantics [RFC7231]. + + Caches expose additional potential vulnerabilities, since the + contents of the cache represent an attractive target for malicious + exploitation. Because cache contents persist after an HTTP request + is complete, an attack on the cache can reveal information long after + a user believes that the information has been removed from the + network. Therefore, cache contents need to be protected as sensitive + information. + + In particular, various attacks might be amplified by being stored in + a shared cache; such "cache poisoning" attacks use the cache to + distribute a malicious payload to many clients, and are especially + effective when an attacker can use implementation flaws, elevated + privileges, or other techniques to insert such a response into a + cache. One common attack vector for cache poisoning is to exploit + differences in message parsing on proxies and in user agents; see + Section 3.3.3 of [RFC7230] for the relevant requirements. + + Likewise, implementation flaws (as well as misunderstanding of cache + operation) might lead to caching of sensitive information (e.g., + authentication credentials) that is thought to be private, exposing + it to unauthorized parties. + + + + + + +Fielding, et al. Standards Track [Page 35] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + Furthermore, the very use of a cache can bring about privacy + concerns. For example, if two users share a cache, and the first one + browses to a site, the second may be able to detect that the other + has been to that site, because the resources from it load more + quickly, thanks to the cache. + + Note that the Set-Cookie response header field [RFC6265] does not + inhibit caching; a cacheable response with a Set-Cookie header field + can be (and often is) used to satisfy subsequent requests to caches. + Servers who wish to control caching of these responses are encouraged + to emit appropriate Cache-Control response header fields. + +9. Acknowledgments + + See Section 10 of [RFC7230]. + +10. References + +10.1. Normative References + + [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, March 1997. + + [RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax + Specifications: ABNF", STD 68, RFC 5234, January 2008. + + [RFC7230] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer + Protocol (HTTP/1.1): Message Syntax and Routing", + RFC 7230, June 2014. + + [RFC7231] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer + Protocol (HTTP/1.1): Semantics and Content", RFC 7231, + June 2014. + + [RFC7232] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer + Protocol (HTTP/1.1): Conditional Requests", RFC 7232, + June 2014. + + [RFC7233] Fielding, R., Ed., Lafon, Y., Ed., and J. Reschke, Ed., + "Hypertext Transfer Protocol (HTTP/1.1): Range Requests", + RFC 7233, June 2014. + + [RFC7235] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer + Protocol (HTTP/1.1): Authentication", RFC 7235, June 2014. + + + + + + + +Fielding, et al. Standards Track [Page 36] + +RFC 7234 HTTP/1.1 Caching June 2014 + + +10.2. Informative References + + [BCP90] Klyne, G., Nottingham, M., and J. Mogul, "Registration + Procedures for Message Header Fields", BCP 90, RFC 3864, + September 2004. + + [RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H., + Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext + Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999. + + [RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an + IANA Considerations Section in RFCs", BCP 26, RFC 5226, + May 2008. + + [RFC5861] Nottingham, M., "HTTP Cache-Control Extensions for Stale + Content", RFC 5861, April 2010. + + [RFC5905] Mills, D., Martin, J., Ed., Burbank, J., and W. Kasch, + "Network Time Protocol Version 4: Protocol and Algorithms + Specification", RFC 5905, June 2010. + + [RFC6265] Barth, A., "HTTP State Management Mechanism", RFC 6265, + April 2011. + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Fielding, et al. Standards Track [Page 37] + +RFC 7234 HTTP/1.1 Caching June 2014 + + +Appendix A. Changes from RFC 2616 + + The specification has been substantially rewritten for clarity. + + The conditions under which an authenticated response can be cached + have been clarified. (Section 3.2) + + New status codes can now define that caches are allowed to use + heuristic freshness with them. Caches are now allowed to calculate + heuristic freshness for URIs with query components. (Section 4.2.2) + + The algorithm for calculating age is now less conservative. Caches + are now required to handle dates with time zones as if they're + invalid, because it's not possible to accurately guess. + (Section 4.2.3) + + The Content-Location response header field is no longer used to + determine the appropriate response to use when validating. + (Section 4.3) + + The algorithm for selecting a cached negotiated response to use has + been clarified in several ways. In particular, it now explicitly + allows header-specific canonicalization when processing selecting + header fields. (Section 4.1) + + Requirements regarding denial-of-service attack avoidance when + performing invalidation have been clarified. (Section 4.4) + + Cache invalidation only occurs when a successful response is + received. (Section 4.4) + + Cache directives are explicitly defined to be case-insensitive. + Handling of multiple instances of cache directives when only one is + expected is now defined. (Section 5.2) + + The "no-store" request directive doesn't apply to responses; i.e., a + cache can satisfy a request with no-store on it and does not + invalidate it. (Section 5.2.1.5) + + The qualified forms of the private and no-cache cache directives are + noted to not be widely implemented; for example, "private=foo" is + interpreted by many caches as simply "private". Additionally, the + meaning of the qualified form of no-cache has been clarified. + (Section 5.2.2) + + The "no-cache" response directive's meaning has been clarified. + (Section 5.2.2.2) + + + + +Fielding, et al. Standards Track [Page 38] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + The one-year limit on Expires header field values has been removed; + instead, the reasoning for using a sensible value is given. + (Section 5.3) + + The Pragma header field is now only defined for backwards + compatibility; future pragmas are deprecated. (Section 5.4) + + Some requirements regarding production and processing of the Warning + header fields have been relaxed, as it is not widely implemented. + Furthermore, the Warning header field no longer uses RFC 2047 + encoding, nor does it allow multiple languages, as these aspects were + not implemented. (Section 5.5) + + This specification introduces the Cache Directive and Warn Code + Registries, and defines considerations for new cache directives. + (Section 7.1 and Section 7.2) + +Appendix B. Imported ABNF + + The following core rules are included by reference, as defined in + Appendix B.1 of [RFC5234]: ALPHA (letters), CR (carriage return), + CRLF (CR LF), CTL (controls), DIGIT (decimal 0-9), DQUOTE (double + quote), HEXDIG (hexadecimal 0-9/A-F/a-f), LF (line feed), OCTET (any + 8-bit sequence of data), SP (space), and VCHAR (any visible US-ASCII + character). + + The rules below are defined in [RFC7230]: + + OWS = + field-name = + quoted-string = + token = + + port = + pseudonym = + uri-host = + + The rules below are defined in other parts: + + HTTP-date = + + + + + + + + + + + +Fielding, et al. Standards Track [Page 39] + +RFC 7234 HTTP/1.1 Caching June 2014 + + +Appendix C. Collected ABNF + + In the collected ABNF below, list rules are expanded as per Section + 1.2 of [RFC7230]. + + Age = delta-seconds + + Cache-Control = *( "," OWS ) cache-directive *( OWS "," [ OWS + cache-directive ] ) + + Expires = HTTP-date + + HTTP-date = + + OWS = + + Pragma = *( "," OWS ) pragma-directive *( OWS "," [ OWS + pragma-directive ] ) + + Warning = *( "," OWS ) warning-value *( OWS "," [ OWS warning-value ] + ) + + cache-directive = token [ "=" ( token / quoted-string ) ] + + delta-seconds = 1*DIGIT + + extension-pragma = token [ "=" ( token / quoted-string ) ] + + field-name = + + port = + pragma-directive = "no-cache" / extension-pragma + pseudonym = + + quoted-string = + + token = + + uri-host = + + warn-agent = ( uri-host [ ":" port ] ) / pseudonym + warn-code = 3DIGIT + warn-date = DQUOTE HTTP-date DQUOTE + warn-text = quoted-string + warning-value = warn-code SP warn-agent SP warn-text [ SP warn-date + ] + + + + + +Fielding, et al. Standards Track [Page 40] + +RFC 7234 HTTP/1.1 Caching June 2014 + + +Index + + 1 + 110 (warn-code) 31 + 111 (warn-code) 31 + 112 (warn-code) 31 + 113 (warn-code) 31 + 199 (warn-code) 32 + + 2 + 214 (warn-code) 32 + 299 (warn-code) 32 + + A + age 11 + Age header field 21 + + C + cache 4 + cache entry 5 + cache key 5-6 + Cache-Control header field 21 + + D + Disconnected Operation (warn-text) 31 + + E + Expires header field 28 + explicit expiration time 11 + + F + fresh 11 + freshness lifetime 11 + + G + Grammar + Age 21 + Cache-Control 22 + cache-directive 22 + delta-seconds 5 + Expires 28 + extension-pragma 29 + Pragma 29 + pragma-directive 29 + warn-agent 29 + warn-code 29 + warn-date 29 + warn-text 29 + + + +Fielding, et al. Standards Track [Page 41] + +RFC 7234 HTTP/1.1 Caching June 2014 + + + Warning 29 + warning-value 29 + + H + Heuristic Expiration (warn-text) 31 + heuristic expiration time 11 + M + max-age (cache directive) 22, 26 + max-stale (cache directive) 22 + min-fresh (cache directive) 22 + Miscellaneous Persistent Warning (warn-text) 32 + Miscellaneous Warning (warn-text) 32 + must-revalidate (cache directive) 24 + + N + no-cache (cache directive) 23, 25 + no-store (cache directive) 23, 24 + no-transform (cache directive) 23, 25 + + O + only-if-cached (cache directive) 23 + + P + Pragma header field 29 + private (cache directive) 25 + private cache 4 + proxy-revalidate (cache directive) 26 + public (cache directive) 25 + + R + Response is Stale (warn-text) 30 + Revalidation Failed (warn-text) 31 + + S + s-maxage (cache directive) 27 + shared cache 4 + stale 11 + strong validator 18 + + T + Transformation Applied (warn-text) 32 + + V + validator 16 + + W + Warning header field 29 + + + + +Fielding, et al. Standards Track [Page 42] + +RFC 7234 HTTP/1.1 Caching June 2014 + + +Authors' Addresses + + Roy T. Fielding (editor) + Adobe Systems Incorporated + 345 Park Ave + San Jose, CA 95110 + USA + + EMail: fielding@gbiv.com + URI: http://roy.gbiv.com/ + + + Mark Nottingham (editor) + Akamai + + EMail: mnot@mnot.net + URI: http://www.mnot.net/ + + + Julian F. Reschke (editor) + greenbytes GmbH + Hafenweg 16 + Muenster, NW 48155 + Germany + + EMail: julian.reschke@greenbytes.de + URI: http://greenbytes.de/tech/webdav/ + + + + + + + + + + + + + + + + + + + + + + + + +Fielding, et al. Standards Track [Page 43] + -- cgit v1.2.3-54-g00ecf