#
# aerc main configuration

[general]
#
# Used as a default path for save operations if no other path is specified.
# ~ is expanded to the current user home dir.
#
#default-save-path=

# If set to "gpg", aerc will use system gpg binary and keystore for all crypto
# operations. If set to "internal", the internal openpgp keyring will be used.
# If set to "auto", the system gpg will be preferred unless the internal
# keyring already exists, in which case the latter will be used.
#
# Default: auto
#pgp-provider=auto

# By default, the file permissions of accounts.conf must be restrictive and
# only allow reading by the file owner (0600). Set this option to true to
# ignore this permission check. Use this with care as it may expose your
# credentials.
#
# Default: false
#unsafe-accounts-conf=false

# Output log messages to specified file. A path starting with ~/ is expanded to
# the user home dir. When redirecting aerc's output to a file using > shell
# redirection, this setting is ignored and log messages are printed to stdout.
#
#log-file=

# Only log messages above the specified level to log-file. Supported levels
# are: trace, debug, info, warn and error. When redirecting aerc's output to
# a file using > shell redirection, this setting is ignored and the log level
# is forced to trace.
#
# Default: info
#log-level=info

# Disable IPC entirely. Don't run commands (including mailto:... and mbox:...)
# in an existing aerc instance, and don't start an IPC server to allow
# subsequent aerc instances to run commands in the current one.
#
# Default: false
#disable-ipc=false

# Don't run mailto:... commands over IPC; start a new aerc instance with the
# composer instead.
#
# Default: false
#disable-ipc-mailto=false
#
# Don't run mbox:... commands over IPC; start a new aerc instance with the mbox
# file instead.
#
# Default: false
#disable-ipc-mbox=false

# Set the $TERM environment variable used for the embedded terminal.
#
# Default: xterm-256color
#term=xterm-256color

# Display OSC8 strings in the embedded terminal
#
# Default: false
#enable-osc8=false

# Default shell command to use for :menu. This will be executed with sh -c and
# will run in an popover dialog.
#
# Any occurrence of %f will be replaced by a temporary file path where the
# command is expected to write output lines to be consumed by :menu. Otherwise,
# the lines will be read from the command's standard output.
#
# Examples:
#   default-menu-cmd=fzf
#   default-menu-cmd=fzf --multi
#   default-menu-cmd=dmenu -l 20
#   default-menu-cmd=ranger --choosefiles=%f
#
#default-menu-cmd=

[ui]
#
# Describes the format for each row in a mailbox view. This is a comma
# separated list of column names with an optional align and width suffix. After
# the column name, one of the '<' (left), ':' (center) or '>' (right) alignment
# characters can be added (by default, left) followed by an optional width
# specifier. The width is either an integer representing a fixed number of
# characters, or a percentage between 1% and 99% representing a fraction of the
# terminal width. It can also be one of the '*' (auto) or '=' (fit) special
# width specifiers. Auto width columns will be equally attributed the remaining
# terminal width. Fit width columns take the width of their contents. If no
# width specifier is set, '*' is used by default.
#
# Default: flags:4,name<20%,subject,date>=
#index-columns=flags:4,name<20%,subject,date>=

#
# Each name in index-columns must have a corresponding column-$name setting.
# All column-$name settings accept golang text/template syntax. See
# aerc-templates(7) for available template attributes and functions.
#
# Here are some examples to show the To field instead of the From field for
# an email (modifying column-name):
#
# 1. a generic one
#   column-name={{ .Peer | names | join ", " }}
# 2. based upon the selected folder
#   column-name={{if match .Folder "^(Gesendet|Sent)$"}}{{index (.To | names) 0}}{{else}}{{index (.From | names) 0}}{{end}}
#
# Default settings
#column-flags={{.Flags | join ""}}
#column-name={{index (.From | names) 0}}
#column-subject={{.ThreadPrefix}}{{.Subject}}
#column-date={{.DateAutoFormat .Date.Local}}

#
# String separator inserted between columns. When the column width specifier is
# an exact number of characters, the separator is added to it (i.e. the exact
# width will be fully available for the column contents).
#
# Default: "  "
#column-separator="  "

#
# See time.Time#Format at https://godoc.org/time#Time.Format
#
# Default: 2006 Jan 02
#timestamp-format=2006 Jan 02

#
# Index-only time format for messages that were received/sent today.
# If this is empty, timestamp-format is used instead.
#
# Default: 15:04
#this-day-time-format=15:04

#
# Index-only time format for messages that were received/sent within the last
# 7 days. If this is empty, timestamp-format is used instead.
#
# Default: Jan 02
#this-week-time-format=Jan 02

#
# Index-only time format for messages that were received/sent this year.
# If this is empty, timestamp-format is used instead.
#
#Default: Jan 02
#this-year-time-format=Jan 02

#
# Overrides timestamp-format for the message view.
#
# Default: 2006 Jan 02, 15:04 GMT-0700
#message-view-timestamp-format=2006 Jan 02, 15:04 GMT-0700

#
# If set, overrides timestamp-format in the message view for messages
# that were received/sent today.
#
#message-view-this-day-time-format=

# If set, overrides timestamp-format in the message view for messages
# that were received/sent within the last 7 days.
#
#message-view-this-week-time-format=

#
# If set, overrides *timestamp-format* in the message view for messages
# that were received/sent this year.
#
#message-view-this-year-time-format=

#
# Width of the sidebar, including the border.
#
# Default: 22
#sidebar-width=22

#
# Default split layout for message list tabs. The syntax is:
#
#       [<direction>] <size>
#
# <direction> is optional and defaults to horizontal. It can take one
# of the following values: h, horiz, horizontal, v, vert, vertical.
#
# <size> is a positive integer representing the size (in terminal cells)
# of the message list window.
#
#message-list-split=

#
# Message to display when viewing an empty folder.
#
# Default: (no messages)
#empty-message=(no messages)

# Message to display when no folders exists or are all filtered
#
# Default: (no folders)
#empty-dirlist=(no folders)
#
# Value to set {{.Subject}} template to when subject is empty.
#
# Default: (no subject)
#empty-subject=(no subject)

# Enable mouse events in the ui, e.g. clicking and scrolling with the mousewheel
#
# Default: false
#mouse-enabled=false

#
# Ring the bell when new messages are received
#
# Default: true
#new-message-bell=true

#
# Template to use for Account tab titles
#
# Default: {{.Account}}
#tab-title-account={{.Account}}

#
# Template to use for Composer tab titles
#
# Default: {{if .To}}to:{{index (.To | shortmboxes) 0}} {{end}}{{.SubjectBase}}
#tab-title-composer={{if .To}}to:{{index (.To | shortmboxes) 0}} {{end}}{{.SubjectBase}}

#
# Template to use for Message Viewer tab titles
#
# Default: {{.Subject}}
#tab-title-viewer={{.Subject}}


# Marker to show before a pinned tab's name.
#
# Default: `
#pinned-tab-marker='`'

# Template for the left side of the directory list.
# See aerc-templates(7) for all available fields and functions.
#
# Default: {{.Folder}}
#dirlist-left={{.Folder}}

# Template for the right side of the directory list.
# See aerc-templates(7) for all available fields and functions.
#
# Default: {{if .Unread}}{{humanReadable .Unread}}{{end}}
#dirlist-right={{if .Unread}}{{humanReadable .Unread}}{{end}}

# Delay after which the messages are actually listed when entering a directory.
# This avoids loading messages when skipping over folders and makes the UI more
# responsive. If you do not want that, set it to 0s.
#
# Default: 200ms
#dirlist-delay=200ms

# Display the directory list as a foldable tree that allows to collapse and
# expand the folders.
#
# Default: false
#dirlist-tree=false

# If dirlist-tree is enabled, set level at which folders are collapsed by
# default. Set to 0 to disable.
#
# Default: 0
#dirlist-collapse=0

# List of space-separated criteria to sort the messages by, see *sort*
# command in *aerc*(1) for reference. Prefixing a criterion with "-r "
# reverses that criterion.
#
# Example: "from -r date"
#
#sort=

# Moves to next message when the current message is deleted
#
# Default: true
#next-message-on-delete=true

# Automatically set the "seen" flag when a message is opened in the message
# viewer.
#
# Default: true
#auto-mark-read=true

# The directories where the stylesets are stored. It takes a colon-separated
# list of directories. If this is unset or if a styleset cannot be found, the
# following paths will be used as a fallback in that order:
#
#   ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets
#   ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets
#   /usr/local/share/aerc/stylesets
#   /usr/share/aerc/stylesets
#
#stylesets-dirs=

# Uncomment to use box-drawing characters for vertical and horizontal borders.
#
# Default: "│" and "─"
#border-char-vertical="│"
#border-char-horizontal="─"

# Sets the styleset to use for the aerc ui elements.
#
# Default: default
#styleset-name=default

# Activates fuzzy search in commands and their arguments: the typed string is
# searched in the command or option in any position, and need not be
# consecutive characters in the command or option.
#
# Default: false
#fuzzy-complete=false

# How long to wait after the last input before auto-completion is triggered.
#
# Default: 250ms
#completion-delay=250ms

# The minimum required characters to allow auto-completion to be triggered after
# completion-delay.
#
# Setting this to "manual" disables automatic completion, leaving only the
# manually triggered completion with the $complete key (see aerc-binds(5) for
# more details).
#
# Default: 1
#completion-min-chars=1

#
# Global switch for completion popovers
#
# Default: true
#completion-popovers=true

# Uncomment to use UTF-8 symbols to indicate PGP status of messages
#
# Default: ASCII
#icon-unencrypted=
#icon-encrypted=✔
#icon-signed=✔
#icon-signed-encrypted=✔
#icon-unknown=✘
#icon-invalid=⚠

# Reverses the order of the message list. By default, the message list is
# ordered with the newest (highest UID) message on top. Reversing the order
# will put the oldest (lowest UID) message on top. This can be useful in cases
# where the backend does not support sorting.
#
# Default: false
#reverse-msglist-order = false

# Reverse display of the message threads. Default order is the initial
# message is on the top with all the replies being displayed below. The
# reverse option will put the initial message at the bottom with the
# replies on top.
#
# Default: false
#reverse-thread-order=false

# Positions the cursor on the last message in the message list (at the
# bottom of the view) when opening a new folder.
#
# Default: false
#select-last-message=false

# Sort the thread siblings according to the sort criteria for the messages. If
# sort-thread-siblings is false, the thread siblings will be sorted based on
# the message UID in ascending order. This option is only applicable for
# client-side threading with a backend that enables sorting. Note that there's
# a performance impact when sorting is activated.
#
# Default: false
#sort-thread-siblings=false

# Set the scroll offset in number of lines from the top and bottom of the
# message list.
#
# Default: 0
#msglist-scroll-offset = 0

#[ui:account=foo]
#
# Enable a threaded view of messages. If this is not supported by the backend
# (IMAP server or notmuch), threads will be built by the client.
#
# Default: false
#threading-enabled=false

# Force client-side thread building
#
# Default: false
#force-client-threads=false

# Show thread context enables messages which do not match the current query (or
# belong to the current mailbox) to be shown for context. These messages can be
# styled separately using "msglist_thread_context" in a styleset. This feature
# is not supported by all backends
#
# Default: false
#show-thread-context=false

# Debounce client-side thread building
#
# Default: 50ms
#client-threads-delay=50ms

#
# Thread prefix customization:

#
# Customize the thread prefix appearance by selecting the arrow head.
#
# Default: ">"
#thread-prefix-tip = ">"

#
# Customize the thread prefix appearance by selecting the arrow indentation.
#
# Default: " "
#thread-prefix-indent = " "

#
# Customize the thread prefix appearance by selecting the vertical extension of
# the arrow.
#
# Default: "│"
#thread-prefix-stem = "│"

#
# Customize the thread prefix appearance by selecting the horizontal extension
# of the arrow.
#
# Default: ""
#thread-prefix-limb = ""

#
# Customize the thread prefix appearance by selecting the folded thread
# indicator.
#
# Default: "+"
#thread-prefix-folded = "+"

#
# Customize the thread prefix appearance by selecting the unfolded thread
# indicator.
#
# Default: ""
#thread-prefix-unfolded = ""

#
# Customize the thread prefix appearance by selecting the first child connector.
#
# Default: ""
#thread-prefix-first-child = ""

#
# Customize the thread prefix appearance by selecting the connector used if
# the message has siblings.
#
# Default: "├─"
#thread-prefix-has-siblings = "├─"

#
# Customize the thread prefix appearance by selecting the connector used if the
# message has no parents and no children.
#
# Default: ""
#thread-prefix-lone = ""

#
# Customize the thread prefix appearance by selecting the connector used if the
# message has no parents and has children.
#
# Default: ""
#thread-prefix-orphan = ""

#
# Customize the thread prefix appearance by selecting the connector for the last
# sibling.
#
# Default: "└─"
#thread-prefix-last-sibling = "└─"

#
# Customize the reversed thread prefix appearance by selecting the connector for
# the last sibling.
#
# Default: "┌─"
#thread-prefix-last-sibling-reverse = "┌─"

#
# Customize the thread prefix appearance by selecting the connector for dummy
# thread.
#
# Default: "┬─"
#thread-prefix-dummy = "┬─"

#
# Customize the reversed thread prefix appearance by selecting the connector for
# dummy thread.
#
# Default: "┴─"
#thread-prefix-dummy-reverse = "┴─"

#
# Customize the reversed thread prefix appearance by selecting the first child
# connector.
#
# Default: ""
#thread-prefix-first-child-reverse = ""

#
# Customize the reversed thread prefix appearance by selecting the connector
# used if the message has no parents and has children.
#
# Default: ""
#thread-prefix-orphan-reverse = ""

[statusline]
#
# Describes the format for the status line. This is a comma separated list of
# column names with an optional align and width suffix. See [ui].index-columns
# for more details. To completely mute the status line except for push
# notifications, explicitly set status-columns to an empty string.
#
# Default: left<*,center:=,right>*
#status-columns=left<*,center:=,right>*

#
# Each name in status-columns must have a corresponding column-$name setting.
# All column-$name settings accept golang text/template syntax. See
# aerc-templates(7) for available template attributes and functions.
#
# Default settings
#column-left=[{{.Account}}] {{.StatusInfo}}
#column-center={{.PendingKeys}}
#column-right={{.TrayInfo}} | {{cwd}}

#
# String separator inserted between columns.
# See [ui].column-separator for more details.
#
#column-separator=" "

# Specifies the separator between grouped statusline elements.
#
# Default: " | "
#separator=" | "

# Defines the mode for displaying the status elements.
# Options: text, icon
#
# Default: text
#display-mode=text

[viewer]
#
# Specifies the pager to use when displaying emails. Note that some filters
# may add ANSI codes to add color to rendered emails, so you may want to use a
# pager which supports ANSI codes.
#
# Default: less -Rc
#pager=less -Rc

#
# If an email offers several versions (multipart), you can configure which
# mimetype to prefer. For example, this can be used to prefer plaintext over
# html emails.
#
# Default: text/plain,text/html
#alternatives=text/plain,text/html

#
# Default setting to determine whether to show full headers or only parsed
# ones in message viewer.
#
# Default: false
#show-headers=false

#
# Layout of headers when viewing a message. To display multiple headers in the
# same row, separate them with a pipe, e.g. "From|To". Rows will be hidden if
# none of their specified headers are present in the message.
#
# Default: From|To,Cc|Bcc,Date,Subject
#header-layout=From|To,Cc|Bcc,Date,Subject

# Whether to always show the mimetype of an email, even when it is just a single part
#
# Default: false
#always-show-mime=false

# Define the maximum height of the mimetype switcher before a scrollbar is used.
# The height of the mimetype switcher is restricted to half of the display
# height. If the provided value for the height is zero, the number of parts will
# be used as the height of the type switcher.
#
# Default: 0
#max-mime-height = 0

# Parses and extracts http links when viewing a message. Links can then be
# accessed with the open-link command.
#
# Default: true
#parse-http-links=true

[compose]
#
# Specifies the command to run the editor with. It will be shown in an embedded
# terminal, though it may also launch a graphical window if the environment
# supports it. Defaults to $EDITOR, or vi.
#editor=

#
# When set, aerc will create and read .eml files for composing that have
# non-standard \n linebreaks. This is only relevant if the used editor does not
# support CRLF linebreaks.
#
#lf-editor=false

#
# Default header fields to display when composing a message. To display
# multiple headers in the same row, separate them with a pipe, e.g. "To|From".
#
# Default: To|From,Subject
#header-layout=To|From,Subject

#
# Edit headers into the text editor instead than separate fields.
#
# When this is true, address-book-cmd is not supported and address completion
# is left to the editor itself. Also, displaying multiple headers on the same
# line is not possible.
#
# Default: false
#edit-headers=false

#
# Specifies the command to be used to tab-complete email addresses. Any
# occurrence of "%s" in the address-book-cmd will be replaced with what the
# user has typed so far.
#
# The command must output the completions to standard output, one completion
# per line. Each line must be tab-delimited, with an email address occurring as
# the first field. Only the email address field is required. The second field,
# if present, will be treated as the contact name. Additional fields are
# ignored.
#
# This parameter can also be set per account in accounts.conf.
#address-book-cmd=

# Specifies the command to be used to select attachments. Any occurrence of
# '%s' in the file-picker-cmd will be replaced with the argument <arg>
# to :attach -m <arg>. Any occurence of '%f' will be replaced by the
# location of a temporary file, from which aerc will read the selected files.
#
# If '%f' is not present, the command must output the selected files to
# standard output, one file per line. If it is present, then aerc does not
# capture the standard output and instead reads the files from the temporary
# file which should have the same format.
#file-picker-cmd=

#
# Allow to address yourself when replying
#
# Default: true
#reply-to-self=true

# Warn before sending an email with an empty subject.
#
# Default: false
#empty-subject-warning=false

#
# Warn before sending an email that matches the specified regexp but does not
# have any attachments. Leave empty to disable this feature.
#
# Uses Go's regexp syntax, documented at https://golang.org/s/re2syntax. The
# "(?im)" flags are set by default (case-insensitive and multi-line).
#
# Example:
# no-attachment-warning=^[^>]*attach(ed|ment)
#
#no-attachment-warning=

#
# When set, aerc will generate "format=flowed" bodies with a content type of
# "text/plain; format=flowed" as described in RFC3676. This format is easier to
# handle for some mailing software, and generally just looks like ordinary
# text. To actually make use of this format's features, you'll need support in
# your editor.
#
#format-flowed=false

[multipart-converters]
#
# Converters allow to generate multipart/alternative messages by converting the
# main text/plain part into any other MIME type. Only exact MIME types are
# accepted. The commands are invoked with sh -c and are expected to output
# valid UTF-8 text.
#
# Example (obviously, this requires that you write your main text/plain body
# using the markdown syntax):
#text/html=pandoc -f markdown -t html --standalone

[filters]
#
# Filters allow you to pipe an email body through a shell command to render
# certain emails differently, e.g. highlighting them with ANSI escape codes.
#
# The commands are invoked with sh -c. The following folders are prepended to
# the system $PATH to allow referencing filters from their name only:
#
#   ${XDG_CONFIG_HOME:-~/.config}/aerc/filters
#   ~/.local/libexec/aerc/filters
#   ${XDG_DATA_HOME:-~/.local/share}/aerc/filters
#   $PREFIX/libexec/aerc/filters
#   $PREFIX/share/aerc/filters
#   /usr/libexec/aerc/filters
#   /usr/share/aerc/filters
#
# If you want to run a program in your default $PATH which has the same name
# as a builtin filter (e.g. /usr/bin/colorize), use its absolute path.
#
# The following variables are defined in the filter command environment:
#
#   AERC_MIME_TYPE      the part MIME type/subtype
#   AERC_FORMAT         the part content type format= parameter
#   AERC_FILENAME       the attachment filename (if any)
#   AERC_SUBJECT        the message Subject header value
#   AERC_FROM           the message From header value
#
# The first filter which matches the email's mimetype will be used, so order
# them from most to least specific.
#
# You can also match on non-mimetypes, by prefixing with the header to match
# against (non-case-sensitive) and a comma, e.g. subject,text will match a
# subject which contains "text". Use header,~regex to match against a regex.
#
text/plain=colorize
text/calendar=calendar
message/delivery-status=colorize
message/rfc822=colorize
#text/html=pandoc -f html -t plain | colorize
#text/html=html | colorize
#text/*=bat -fP --file-name="$AERC_FILENAME"
#application/x-sh=bat -fP -l sh
#image/*=catimg -w $(tput cols) -
#subject,~Git(hub|lab)=lolcat -f
#from,thatguywhodoesnothardwraphismessages=wrap -w 100 | colorize

# This special filter is only used to post-process email headers when
# [viewer].show-headers=true
# By default, headers are piped directly into the pager.
#
.headers=colorize

[openers]
#
# Openers allow you to specify the command to use for the :open and :open-link
# actions on a per-MIME-type basis. The :open-link URL scheme is used to
# determine the MIME type as follows: x-scheme-handler/<scheme>.
#
# {} is expanded as the temporary filename or URL to be opened with proper
# shell quoting. If it is not encountered in the command, the filename/URL will
# be appended to the end of the command. The command will then be executed with
# `sh -c`.
#
# Like [filters], openers support basic shell globbing. The first opener which
# matches the part's MIME type (or URL scheme handler MIME type) will be used,
# so order them from most to least specific.
#
# Examples:
# x-scheme-handler/irc=hexchat
# x-scheme-handler/http*=printf '%s' {} | wl-copy
# text/html=surf -dfgms
# text/plain=gvim {} +125
# message/rfc822=thunderbird

[hooks]
#
# Hooks are triggered whenever the associated event occurs.

#
# Executed when a new email arrives in the selected folder
#mail-received=notify-send "[$AERC_ACCOUNT/$AERC_FOLDER] New mail from $AERC_FROM_NAME" "$AERC_SUBJECT"

#
# Executed when mail is deleted from a folder
#mail-deleted=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &

#
# Executed when aerc adds mail to a folder
#mail-added=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &

#
# Executed when aerc starts
#aerc-startup=aerc :terminal calcurse && aerc :next-tab

#
# Executed when aerc shuts down.
#aerc-shutdown=

#
# Executed when notmuch tags are modified.
#tag-modified=

#
# Executed when flags are changed on a message.
#flag-changed=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &

[templates]
# Templates are used to populate email bodies automatically.
#

# The directories where the templates are stored. It takes a colon-separated
# list of directories. If this is unset or if a template cannot be found, the
# following paths will be used as a fallback in that order:
#
#   ${XDG_CONFIG_HOME:-~/.config}/aerc/templates
#   ${XDG_DATA_HOME:-~/.local/share}/aerc/templates
#   /usr/local/share/aerc/templates
#   /usr/share/aerc/templates
#
#template-dirs=

# The default template to be used for new messages.
#
# default: new_message
#new-message=new_message

# The default template to be used for quoted replies.
#
# default: quoted_reply
#quoted-reply=quoted_reply

# The default template to be used for forward as body.
#
# default: forward_as_body
#forwards=forward_as_body